Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Oil, Gas & Refineries
- Agriculture
- Energy
- Metal
- Environmental
- Air and Climate
- Food and Beverage
- Construction & Construction Materials
- Mining
- Medical / Health Care
- Chemical & Pharmaceuticals
- Pulp & Paper
- Automobile & Ground Transport
- Electronics and Computers
- Waste and Recycling
- Commercial
- Aerospace & Air Transport
- Soil and Groundwater
- Glassware
- Health and Safety
- University / Academia / Research
- Plastics & Resins
- Textile
- Printing
- Defense
- Paint
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Packaging
- Logistics
- Government
- Forestry & Wood
- Travel & Leisure
- Retail
- Dry Cleaning
- Household Appliances
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Real Estate
- Furniture
Xprt Product Applications In China
3,635 applications found
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
The Wercs has developed an online reporting module which enables manufacturers to completely eliminate the manual system that is in place for VOC/HAPs reporting. This new module automatically gathers VOC/HAPs data from SDSs and cross-references it with the order history. Your customers can now go to a secured website, enter the name of the product and get a complete VOC/HAPs emission analysis for annual reporting ...
ByUL Solutions LLC- WERCS Studio based in Bentonville, ARKANSAS (USA)
Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling ...
ByCerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA)
QUA’s CeraQ ceramic membrane modules are designed for challenging water and wastewater applications. The CeraQ modules consist of 3.5 mm ID ceramic tubular elements potted into bundles for various surface area requirements. The module is capable of removing virus, bacteria, colloidal matter, submicron or micron sized suspended particles, oil and organics from a wide range of fluids, including drinking water and industrial wastewater to economically meet variety of treatment objectives or to ...
ByQUA Group LLC based in Canonsburg, PENNSYLVANIA (USA)
QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your ...
ByQUA Group LLC based in Canonsburg, PENNSYLVANIA (USA)
QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in R&D, the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment applications. ...
ByQUA Group LLC based in Canonsburg, PENNSYLVANIA (USA)
In water treatment the main processes used are demineralization, softening, ion exchange, gravity and pressure filtration. Trislot wedge wire screens are used in these processes to collect or distribute the treated liquid, to retain the treatment media, to filter solids. The main advantages compared to perforated plate, wire mesh or other filtration media are: high efficiency, long service life, flexible design, low ...
ByTrislot N.V. based in Waregem, BELGIUM
In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification. Further applications are: Diluting and conveying acids and lye during the process of regenerating ion ...
ByKörting Hannover AG based in Hannover, GERMANY
NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the ...
ByUnisearch Associates Inc. based in Concord, ONTARIO (CANADA)
Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified ...
ByUnisearch Associates Inc. based in Concord, ONTARIO (CANADA)
Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in Berlin, GERMANY
ByGardner Denver Thomas GmbH based in Fürstenfeldbruck, GERMANY
The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The Situation: A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills. These facilities prevent out of compliance discharge by capturing all stormwater in storm drains, which is then sent to treatment systems prior to discharge. At ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in Steinen, GERMANY
Flexible, turnkey solutions for container cleaning. Cleaning industrial containers such as canisters, vats or IBCs produce large volumes of effluent. The type of impurities in this effluent depends heavily on what has been transported in the containers. That’s why effluent treatment requires a flexible system able to cope with all conceivable contaminants. Reconditioners are increasingly using modern vacuum distillation systems to do this. They work fully automatically, guarantee a high level of process ...
ByH2O GmbH based in Steinen, GERMANY