Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Oil, Gas & Refineries
- Agriculture
- Energy
- Metal
- Environmental
- Air and Climate
- Food and Beverage
- Construction & Construction Materials
- Mining
- Medical / Health Care
- Chemical & Pharmaceuticals
- Pulp & Paper
- Automobile & Ground Transport
- Electronics and Computers
- Waste and Recycling
- Commercial
- Aerospace & Air Transport
- Soil and Groundwater
- Glassware
- Health and Safety
- University / Academia / Research
- Plastics & Resins
- Textile
- Printing
- Defense
- Paint
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Packaging
- Logistics
- Government
- Forestry & Wood
- Travel & Leisure
- Retail
- Dry Cleaning
- Household Appliances
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Real Estate
- Furniture
Xprt Product Applications In China
3,655 applications found
2B Technologies is the founding and principal sponsor of the Global Ozone Project or "GO3 Project." This project was formed in 2009 with the aim of engaging middle school and high school students in real-world measurements of air pollutants important in air quality and climate. The GO3 Project is administered by the GO3 Foundation, a 501(c)(3) non-profit organization, which raises funds for sponsorship of schools from individuals, small businesses, large corporations, and government agencies. 2B Technologies ...
By2B Technologies based in  Boulder, COLORADO (USA)
AQI (Air Quality Index) network monitoring implements network management of air pollution prevention and control in the certain area, which can provide conventional pollutant data and provide administrative support; in addition, source analysis shows the ...
ByFocused Photonics Inc. (FPI) based in  Hangzhou, CHINA
Continuous emission monitoring system (CEMS) is the total equipment necessary for the determination of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements and a conversion equation, graph, or computer program to produce results in units of the applicable emission and transmit the information to the Continuous Emission Monitoring system. ...
ByEnviro Solutions Technology Co.,Ltd based in  Wuhan, CHINA
In response to the complexity of the causes of air pollution, the combination of wind lidar, Raman and Mie scattering aerosol lidar, particulate flux lidar, ozone lidar and other equipment can not only monitor the distribution characteristics of particulate matter, spatial changes in ozone concentration, and dynamic evolution of the wind field in real time, but also deeply analyze the complete process of various pollutants, including sand and dust, from the source to the transmission path, until the final ...
ByQingdao Leice Transient Technology Co., Ltd. based in  Qingdao, CHINA
To address the synergistic pollution of ozone (O3), volatile organic compounds (VOCs) and fine particulate matter (PM2.5) in key regions of China. By assembling a team of experts from top institutions such as Ocean University of China (OUC), Anguang Institute of Chinese Academy of Sciences (AIAS), and Xi'an University of Technology (XUT), the team will analyze in depth the causes of air pollution, including local emission sources, regional transmission contributions, and meteorological conditions, and will provide ...
ByQingdao Leice Transient Technology Co., Ltd. based in  Qingdao, CHINA
ChemScan is now an In-Situ brand. With our recent acquisition of this leading manufacturer of chemical analyzers for water and wastewater monitoring and control, we now offer a complete monitoring solution that includes analysis systems, multiparameter sondes, drift-resistant sensors, flow meters, and data services for our municipal ...
ByIn-Situ Environmental based in  Fort Collins, COLORADO (USA)
Total organic carbon measurements in the manufacturing or semiconductor industry are of big importance regarding product quality and safety in process. TOC levels inUltra Pure Water (UPW)applications are very ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in  Berlin, GERMANY
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Ozone is an allotropic form of oxygen; each molecule contains three atoms of oxygen instead of the usual two. Ozone is a powerful disinfectant and has been used commercially for the treatment of potable water since 1904. It is produced on site in the same way that ozone is formed naturally, by the discharge of electricity during a thunderstorm. A high voltage is passed across a gas stream containing oxygen. This method of ozone generation is called corona discharge. The energy of the high voltage splits an ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Industrial facilities, Superfund sites and other remediation sites. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the ...
ByQED Environmental Systems, Inc based in  Dexter, MICHIGAN (USA)
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Rivertrace has the solution to your environmental monitoring needs and can tailor make systems to your own individual requirements. Our range of monitoring applications includes, boiler water, condensate cooling water, discharge water and many others. Our commitment to ongoing development ensures that these products remain at the forefront of available technology, and consistently push the boundaries of oil-in-water analysis. ...
ByRivertrace Ltd based in  Redhill, UNITED KINGDOM
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS
Ambient air quality monitoring is the systematic, long-term assessment of pollutant levels by measuring the concentration and types of certain pollutants in the surrounding, outdoor air. Some of these pollutants (commonly called ‘Criteria Pollutants’) are considered hazardous to human health and their levels are regulated by government agencies around the world, including the US EPA. Teledyne API provides a complete line of ambient air quality monitoring instruments, including those for both gas and ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Motor vehicle emissions are a major source of air pollution in urban areas and impact the lives of billions of people every day around the world. Motor vehicle exhaust contains toxic chemicals that are harmful to people’s health when exposed at certain levels. These toxic fumes cause smog in the atmosphere, which can affect very broad regional air sheds and contribute to the formation of cancer. Teledyne API has several products specifically designed to meet the challenging demands of near-roadside air ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, and minerals such as iron and manganese. Ozone (O3) gas is commonly used in this contaminant removal industrial process as an effective and economical oxidizer. ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)