Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Oil, Gas & Refineries
- Agriculture
- Energy
- Metal
- Environmental
- Air and Climate
- Food and Beverage
- Construction & Construction Materials
- Mining
- Medical / Health Care
- Chemical & Pharmaceuticals
- Pulp & Paper
- Automobile & Ground Transport
- Electronics and Computers
- Waste and Recycling
- Commercial
- Aerospace & Air Transport
- Soil and Groundwater
- Glassware
- Health and Safety
- University / Academia / Research
- Plastics & Resins
- Textile
- Printing
- Defense
- Paint
- Maritime/Shipbuild/Water Transport
- Packaging
- Communications / Telecom / Datacom
- Logistics
- Government
- Forestry & Wood
- Retail
- Travel & Leisure
- Dry Cleaning
- Household Appliances
- Banking & Finance / Insurance / Legal
- Furniture
- Leather & Tanning
- Real Estate
Xprt Product Applications In China
3,635 applications found
Power plants, paper and steel mills and other industries with rotating equipment often use recirculated water for the cooling of lubricating, hydraulic, turbine and transformer oil. If an oil cooler leaks, the loss of oil can cause significant damage to the pumps, compressors and motors. High oil & grease water discharge test results can be caused by oil contamination. In some cases, air quality issues can also occur. A UV fluorescence oil in water monitor from Turner Designs Hydrocarbon Instruments can ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The Situation: A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from tanker bilges, contaminated rainwater runoff, truck spills, oil spills into waterways, crankcase drain oils, hydraulic oils and industrial lubricants, ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Industry Challenge: The most common products here are plastics, pharmaceutical products, plant protection products, organic and inorganic base materials, chemicals and cosmetic products for everyday use. Ressources like water and air play an important role in chemical product manufacturing and purification processes. As a result, a vast variety of wastewater is generated, containing all kinds of residues from cleaning processes, pharmaceutical products, aqueous chemicals or dyestuffs. Legal requirements for the ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
The most important environmental problem of this type of industry, apart from the consumption of water and energy, is the discharge of wastewater, both for its volume and for its organic pollutant ...
BySalher based in Madrid, SPAIN
Design, implementation and operation of water purification systems to remove salts and pollutants from the surface, underground, brackish and ...
BySalher based in Madrid, SPAIN
Equip yourself with various operating voltages and advanced control. From silicon wafer processing to steel-billet production, thermal processing, including general heat treatment, is used in everything. And to transform your materials into reliable, high-quality, finished products, you need precise ...
ByAdvanced Energy Industries, Inc. based in Denver, COLORADO (USA)
Applications of Acoustics and Electroacoustics for characterizing mineral dispersions are described in the papers listed below. Titration option of the DTI instruments is suitable for determining optimum dose of surfactant for stabilizing clay and mineral ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
Non-destructive testing (NDT) is an inspection and analysis technique used by the oil and gas industry, among others, to evaluate the properties of pipelines without destroying the serviceability of the original system. Surface corrosion, mechanical damages, and cracks are the most common discontinuities detected by visual ...
ByCreaform - AMETEK, Inc based in Lévis, QUEBEC (CANADA)
Introduction: Ammonia (NH3) is a well-known, widely spread air pollutant, which is present almost everywhere in low ppm/ppb concentrations. So this chemical can be found in various processes, where gases are the basic media, such as steam crackers producing gaseous hydrocarbons for further production steps like polymerization. Gases like this are for example Ethylene, Propylene and even so called cracker gas, which is mostly a mixture of above mentioned gases as well as Water and Hydrogen. The gases of interest ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Chlorodimethylether (CMME) and Bis Chloromethyl-ether (BCME) as well as Ethylene dichloride (EDC) and Methylene chloride (DCM) are well known as carcinogenic substances, like other chlorinated hydrocarbons. BCME is also very toxic. These particular chemicals are widely used in the world of chemical industry, especially in the production process for ion exchange resins. CMME in that case acts as a precursor for those resins while BCME is generated as an impurity which cannot be ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: DMS (Dimethylsulfate) is a liquid compound with a high vapor pressure. It is a widely used basic chemical in the production of Agrochemicals, Cosmetics and Pharmaceutics. It is very toxic at ppb- concentrations already, but also carcinogenic and mutagenic. Furthermore by hydrolysis sulfuric acid is formed, so it is very corrosive also. Since there’s no warning effect in terms of irritation and/ or odor, dangerous amounts can be incorporated without realizing. The effects of intoxication, which ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Ethylene oxide is a highly flammable and toxic gas which is the main precursor in the production of Ethylene glycol but also widely used in the medical sterilization. The Ethylene oxide sterilization is applied on medical and pharmaceutical products which cannot resist the high temperature ranges in usual steam sterilization processes. Certain products in the food industry are sterilized in the same way. Ethylene oxide gas penetrates the packaging as well as the product and kills all microorganisms ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Flue gas analyzer solutions for continuous emission monitoring ...
ByCubic Instruments (Wuhan) Ltd. based in Wuhan, CHINA
Flue gas analyzer solutions for Portable flue gas analyzer for industrial ...
ByCubic Instruments (Wuhan) Ltd. based in Wuhan, CHINA
Automobile emission gas analyzer solution for PC based emission monitoring ...
ByCubic Instruments (Wuhan) Ltd. based in Wuhan, CHINA
Automobile emission gas analyzer solution for vehicle emission testing ...
ByCubic Instruments (Wuhan) Ltd. based in Wuhan, CHINA
Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
MOP (muriate of potash) is used in water softening systems. Ion-exchange softeners allow for the improvement of the quality of potable and processed water. Water flows through a porous material, i.e. ion-exchange resin, where Ca and Mg ions are removed from water and stay in the ion-exchanger while Na or K ion is put in their place on its surface. When all the available sodium ions have been replaced with calcium or magnesium ions during operation, the resin must be ...
ByUralkali Trading SIA based in Riga, LATVIA
At YASA we collaborate with companies in different industries to reduce their wastewater and liquid pollutants production. Specialising in design and build projects, YASA ET offers a unique portfolio of innovative technologies to treat water, wastewater, odour and sludge, including standard and traditional treatment processes and a range of patented, technological solutions. YASA ET experience in wastewater treatment make us the preferred choice of world famous enterprises that recognized our commitment in a ...
ByYASA ET based in Shanghai, CHINA
The Situation: Refineries use a significant amount of steam in the process of distilling gasoline, diesel and other hydrocarbon products. The refinery design will collect and return as much steam as possible to save on energy, water consumption and sewering costs. For some refineries 50% of the steam can be recovered. Because the return steam can be contaminated by hydrocarbon leaks in the heat exchangers, refineries often will install a monitoring system to alert operators when a hydrocarbon leak has ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)