- Home
- costa rica
- Applications
Refine by
Industries served
- Water and Wastewater
- Manufacturing, Other
- Monitoring and Testing
- Agriculture
- Food and Beverage
- Environmental
- University / Academia / Research
- Energy
- Chemical & Pharmaceuticals
- Electronics and Computers
- Mining
- Oil, Gas & Refineries
- Glassware
- Medical / Health Care
- Plastics & Resins
- Pulp & Paper
- Air and Climate
- Aerospace & Air Transport
- Construction & Construction Materials
- Automobile & Ground Transport
- Defense
- Waste and Recycling
- Maritime/Shipbuild/Water Transport
- Textile
- Health and Safety
- Soil and Groundwater
Xprt Product Applications In Costa Rica
176 applications found
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Deployable battery operated monitoring systems for measurement of dusts (PM10, PM2.5), gases and vapours. Generally used for measurements of site boundaries or chemical ...
ByCasella based in  Kempston, UNITED KINGDOM
Premium
Where unattended monitoring for longer periods is required to obtain more detailed information of the noise climate. Equipment is protected from the weather and powered for longer periods with options to remotely download ...
ByCasella based in  Kempston, UNITED KINGDOM
Premium
Bodily worn equipment and associated accessories and sampling media for undertaking personal air samples onto media which is then further analysed. Used for measuring employees' exposure to dusts, fumes, gases or ...
ByCasella based in  Kempston, UNITED KINGDOM
Premium
The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
OPSIS EEx Zone 1 and 2 certified monitoring equipment meets the demands for monitoring in harsh areas with a high amount of corrosive gaseous compounds. OPSIS offers two monitoring solutions, TDL (Tuneable Laser Diode) technology with ER060L-EEx emitter and receiver set, for harsh installations, and OPSIS O2000 oxygen monitor. The most suitable technique is used for the application at ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
OPSIS is a world-leading supplier of gas monitoring systems for various special applications in the process control sector. The OPSIS process monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive process control systems. We also provide additional products and services, including dust and flow ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Manage inventory while in the plant, while traveling, or away from the ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
Engage suppliers in replenishing the supply chain to optimize ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
Low-level alerts eliminate empty ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
Prevent jamming or damaging ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
BinMaster helps ag cooperatives, millers, farmers, and agronomy companies affordably automate grain, seed, feed, fertilizer, and chemical inventory. Whether it's managing multiple vessels or sites, projecting future orders, optimizing storage capacity, or ensuring the availability of essential ingredients, BinMaster will make your job ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
Tracking inventory for valuable bulk resins, powders, flakes, and regrind can be a daunting task for plastic processors. BinMaster makes tracking easier with continuous and point level sensors to monitor material in silos, hoppers, and granulators. Measurement data is sent to your phone or PC. Optimize inventory turnover, reduce carrying costs, gain real-time visibility for resin levels across multiple plants with BinMaster advanced polymer handling sensors. Perfect for vendor managed ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
Food and beverage processors need to measure ingredient levels in storage and process silos, mixers, and batching tanks, or on conveyors and in pipelines. To ensure food quality, level sensors must comply with FSMA food safety and meet hygienic, CIP or clean-in-place requirements to reduce the risk of contamination and prevent out-of-spec batches. From brewing to baby food, and solids to slurries, BinMaster has solutions for inventory monitoring and flow detection to optimize uptime and supply chain management. ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
BinMaster Delivers a Safer, Smarter Mine. You're faced with the challenges of maximizing process efficiency, meeting production quotas, and keeping your equipment operational, while also protecting the environment and keeping your staff safe. BinMaster level sensors, software, wireless networks, and aeration and flow products help ease you through your digital transformation. Our experts work with you to understand your challenges and apply technology to create safer, smarter, and more sustainable mining ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
There can be several purposes for monitoring the air quality in an urban area. If the aim is to assess what the residents are exposed to in the worst case, a so-called street-level monitoring is carried out. If the aim is to monitor the general levels of air pollution and follow up long-term trends, you should instead monitor further away from the busiest roads, for example at roof level. ...
ByOPSIS AB based in  Furulund, SWEDEN