- Home
- czech republic
- Applications
Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Air and Climate
- Energy
- Medical / Health Care
- Food and Beverage
- Oil, Gas & Refineries
- Agriculture
- Metal
- Construction & Construction Materials
- Mining
- Chemical & Pharmaceuticals
- Environmental
- Waste and Recycling
- Soil and Groundwater
- Glassware
- Pulp & Paper
- University / Academia / Research
- Automobile & Ground Transport
- Electronics and Computers
- Aerospace & Air Transport
- Plastics & Resins
- Forestry & Wood
- Packaging
- Paint
- Communications / Telecom / Datacom
- Banking & Finance / Insurance / Legal
- Defense
- Maritime/Shipbuild/Water Transport
- Health and Safety
- Dry Cleaning
- Commercial
- Real Estate
- Textile
- Travel & Leisure
- Government
- Retail
- Logistics
- Printing
Xprt Product Applications In Czech Republic
1,182 applications found
Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Dry mixed recycling (also known as “co-mingled” waste) can be found within many municipalities and residential areas worldwide. It refers to a system where paper, card, plastics, metals and other recyclable products are collectively separated from the municipal waste stream at source. Ideally glass should not be included but can be accommodated if required. This mixture of recyclables is then separated at a materials recovery facility for onwards closed loop ...
ByKiverco Ltd. based in  Dungannon, NORTHERN IRELAND
Processing recyclable and disposable materials out of C&D waste. C&D waste can include almost anything from wood to stones. The TANA Shark can easily handle waste wood, plastics, aluminum profiles, insulation materials and reasonable amounts of ...
ByTana Oy based in  Jyvaskyla, FINLAND
Commercial and industrial waste typically contains different kinds of packaging materials, like hard and soft plastics, cardboard, paper, wires, paper rolls, containers, aluminium, gypsum or any reject from production line of a manufacturing process, sand paper for instance. In other words, a wide variety of different kinds of materials with various requirement to the machines it is treated with. TANA shredders are widely used in treatment of this variety of ...
ByTana Oy based in  Jyvaskyla, FINLAND
Mattresses are usually considered a nightmare in the waste management industry. Mattresses cannot be easily compacted in the landfill, and springs are difficult for most shredders. For low-revving and high-torque TANA Shark shredders, however, mattresses are an easy ...
ByTana Oy based in  Jyvaskyla, FINLAND
Ragger wire or pulper tail is the residue of steel wires and plastic that remains after a pulping process. A mass of recyclable paper is being processed with the help of water. The remaining mass, consisting of wires and plastics of the bales, is called ragger wire. It is often landfilled because no method or machinery can separate the material cost efficiently. But when you can the recovered steel easily justifies the purchase of a TANA shredder. The rest can be landfilled or used as alternative ...
ByTana Oy based in  Jyvaskyla, FINLAND
Statiflo has the most extensive range of Motionless Mixers, for pipes and open channels, suitable for pre-treatment and post-treatment applications: Inlet blending, Disinfection and pH control, Coagulation and flocculation (floc mixer), Remineralisation, Brine dilution before sea outfalls. Statiflo’s unique customised approach to static mixer design provides the most effective mixing solutions for both new treatment plants and retrofits to existing ...
ByStatiflo International Ltd. based in  Macclesfield, UNITED KINGDOM
They are classic heat exchangers when the technology requires for its operation to frustrate a certain amount of heat in these air exchangers. Classic installations are such that for heat frustration they use fans with high own consumption of electric energy for feeding fans. Thereby the circuit is cooled down by the given delta t. The principle of our coolers is the same, only with that difference that we use the input energy of heat just for the production of electric energy feeding fans of the cooler. Not by ...
ByB:POWER, a. s based in  HavlÃckuv Brod, CZECH REPUBLIC
We are a strategic partner of major global rubber processing companies. Our innovative technologies help them plan their production better and save significant energy costs. Rubbers, rubber compounds as well as final rubber products are generally characterised by low thermal conductivity. Conventional surface-to-core heating is time-consuming, inefficient and energy-intensive. Microwave heating works simultaneously throughout the depth of the material. It is therefore fast, homogeneous, and energy less expensive. ...
ByROMILL s r.o based in  Brno, CZECH REPUBLIC
Geosynthetics offer cost-effective, long-term solutions where conditions impose severe restrictions on road construction - where subsoils are poorly drained, or where the subgrade consists of cohesive, saturated and/or organic soil. Geosynthetics have also radically changed the way embankments, retaining walls, steep slopes, and even tunnels and bridges are ...
ByTenCate Geosynthetics Netherlands bv based in  Hengelo, NETHERLANDS
Your infrastructure is essential to sustaining economic growth and improving quality of life. Our solutions address the entire transportation lifecycle, spanning planning, design, analysis, maintenance, and operation of roads, bridges, tunnels, drainage systems, and roadway assets. Bentley has provided solutions to highway agencies for over three decades. Our solutions are proven, trusted, and reliable, and will help you to create, manage, and renew your road assets on budget and on ...
ByBentley Systems, Incorporated based in  Exton, PENNSYLVANIA (USA)
Reduce your operating costs on haul roads, develop dust mitigation strategies to protect nearby communities and find solutions for better tailings management. Learn how we can introduce our solutions to your road network to help reduce your impact on the environment while also cutting down on operating ...
ByCypher Environmental Ltd. based in  Winnipeg, MANITOBA (CANADA)
Lower your maintenance costs on unpaved municipal and country roads with long-term solutions that don’t require expensive annual costs that can run high. Municipal and County roads are plagued with costly maintenance bills on their vast network of unpaved roads on an annual basis. This does not take into account the significant budgets that need to be allocated for road dust control every year. Cypher Environmental has some unique solutions to help municipal and county officials better manage their road ...
ByCypher Environmental Ltd. based in  Winnipeg, MANITOBA (CANADA)
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Geotech supports the monitoring of medical gases within dentistry, hospital and veterinary industries with hand held N2O, O2, CO2 and CO ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Continuous on-line monitoring can be used to alarm unacceptable deviations from established control points and to ensure quality standards are ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
There are strict regulations in place surrounding waste water, which makes it very important to monitor. Even small changes in aquatic ecosystems can have a huge impact in the chemical makeup of water, temperature, etc. By using real time monitoring on water quality, pollutants can be detected and mitigated before they pose a potential threat to these ecosystems and enter the water course. The rugged AP-2000 allows for real time testing of wastewater and helps to minimise risk of any potential fines. It is works ...
ByAquaread Ltd, Part of the NKE Group based in  Broadstairs, UNITED KINGDOM