Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Medical / Health Care
- Oil, Gas & Refineries
- Environmental
- Food and Beverage
- Agriculture
- Air and Climate
- Energy
- Metal
- Waste and Recycling
- Construction & Construction Materials
- Mining
- Chemical & Pharmaceuticals
- University / Academia / Research
- Electronics and Computers
- Glassware
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- Aerospace & Air Transport
- Plastics & Resins
- Health and Safety
- Commercial
- Communications / Telecom / Datacom
- Defense
- Retail
- Logistics
- Travel & Leisure
- Packaging
- Paint
- Maritime/Shipbuild/Water Transport
- Textile
- Government
- Forestry & Wood
- Publishing / Media / Marketing
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Domestic
- Household Appliances
- Printing
Xprt Product Applications In Denmark
1,264 applications found
Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in  Berlin, GERMANY
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in  Falmouth, UNITED KINGDOM
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in  Steinen, GERMANY
Flexible, turnkey solutions for container cleaning. Cleaning industrial containers such as canisters, vats or IBCs produce large volumes of effluent. The type of impurities in this effluent depends heavily on what has been transported in the containers. That’s why effluent treatment requires a flexible system able to cope with all conceivable contaminants. Reconditioners are increasingly using modern vacuum distillation systems to do this. They work fully automatically, guarantee a high level of process ...
ByH2O GmbH based in  Steinen, GERMANY
Crystal-clear distillate. For optimum painting pre-treatment results. Are using vacuum distillation systems to recondition rinse water during paint pre-treatment. The advantage of this type of system lies in the quality of the reconditioned rinse ...
ByH2O GmbH based in  Steinen, GERMANY
Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Ammonia (NH3) is formed from the breakdown of urea in slurry and manure, and hence this is the main source of NH3 emission in the UK. High levels of NH3 emissions can cause a large amount of environmental damage to vegetation. As well as the outward environmental impact, high NH3 concentrations in and around livestock enclosures have a detrimental effect on the health and well-being of the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years. ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Reciprocating internal combustion engines burning natural gas are a source of formaldehyde emissions. There are strict tolerances imposed on operators of engines to ensure that formaldehyde is removed effectively and that formaldehyde emissions are below published limits. The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. A landfill site is a site for the disposal of waste materials by burial. Historically, landfills have been the most common method of organised waste disposal and remain so in many places around the world. Some landfills are also used for waste management purposes, such as the temporary storage, consolidation, and transfer, or processing of waste materials. Landfill gas is created by the action of microorganisms within a landfill. This includes ...
ByEdinburgh Sensors Ltd - TECHCOMP Group based in  Livingston, UNITED KINGDOM
Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we've pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
Hydrocarbon Processing is one of the most demanding industries in the world. High levels of productivity must be achieved while constantly maintaining the very highest safety standards. Effective gas analysis is a critical component of all HP processes, typically requiring a wide range of measurements to ensure the safe, optimized running of the ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
The accurate measurement of a gas mixture composition is essential to a wide range of industries and processes. Whatever your application, the key to this success is effective gas analysis you can trust to keep your operations ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
In industry water is used for various processes, e.g. for heating, for cooling, as steam to drive turbines, as a reaction medium and for cleaning. Depending on the application water requires a specific quality / ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in  Berlin, GERMANY
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS