Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Medical / Health Care
- Oil, Gas & Refineries
- Environmental
- Food and Beverage
- Agriculture
- Air and Climate
- Energy
- Metal
- Waste and Recycling
- Construction & Construction Materials
- Mining
- Chemical & Pharmaceuticals
- University / Academia / Research
- Electronics and Computers
- Glassware
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- Aerospace & Air Transport
- Plastics & Resins
- Health and Safety
- Commercial
- Communications / Telecom / Datacom
- Defense
- Retail
- Logistics
- Travel & Leisure
- Packaging
- Paint
- Maritime/Shipbuild/Water Transport
- Textile
- Government
- Forestry & Wood
- Publishing / Media / Marketing
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Domestic
- Household Appliances
- Printing
Xprt Product Applications In Denmark
1,264 applications found
Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Sometimes an 'off the shelf' water quality monitoring product is just not available and it is necessary to engineer a complete bespoke monitoring solution. System integration demands a diverse range of abilities. PPM is experienced in designing the correct suite of instrumentation combining manufactured, distributed and factored ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
The Wercs has developed an online reporting module which enables manufacturers to completely eliminate the manual system that is in place for VOC/HAPs reporting. This new module automatically gathers VOC/HAPs data from SDSs and cross-references it with the order history. Your customers can now go to a secured website, enter the name of the product and get a complete VOC/HAPs emission analysis for annual reporting ...
ByUL Solutions LLC- WERCS Studio based in  Bentonville, ARKANSAS (USA)
In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification. Further applications are: Diluting and conveying acids and lye during the process of regenerating ion ...
ByKörting Hannover AG based in  Hannover, GERMANY
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in  Falmouth, UNITED KINGDOM
Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in  Berlin, GERMANY
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in  Steinen, GERMANY
Flexible, turnkey solutions for container cleaning. Cleaning industrial containers such as canisters, vats or IBCs produce large volumes of effluent. The type of impurities in this effluent depends heavily on what has been transported in the containers. That’s why effluent treatment requires a flexible system able to cope with all conceivable contaminants. Reconditioners are increasingly using modern vacuum distillation systems to do this. They work fully automatically, guarantee a high level of process ...
ByH2O GmbH based in  Steinen, GERMANY
Crystal-clear distillate. For optimum painting pre-treatment results. Are using vacuum distillation systems to recondition rinse water during paint pre-treatment. The advantage of this type of system lies in the quality of the reconditioned rinse ...
ByH2O GmbH based in  Steinen, GERMANY
Piper Environmental Group, Inc. has partnered with Primozone Production AB in Löddeköpinge, Sweden for our municipal, groundwater, and wastewater applications. Our successful installations since 2015 have made our choice an obvious one. Primozone’s applications are in 30 countries worldwide, with documented OPEX (Operating Expense) savings that are key for companies and utilities who truly believe in a low carbon footprint, sustainability, and reducing their operating costs in maintenance, ...
ByPiper Environmental Group, Inc. based in  Castroville, CALIFORNIA (USA)
Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Ammonia (NH3) is formed from the breakdown of urea in slurry and manure, and hence this is the main source of NH3 emission in the UK. High levels of NH3 emissions can cause a large amount of environmental damage to vegetation. As well as the outward environmental impact, high NH3 concentrations in and around livestock enclosures have a detrimental effect on the health and well-being of the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years. ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM