Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Medical / Health Care
- Oil, Gas & Refineries
- Environmental
- Food and Beverage
- Agriculture
- Air and Climate
- Energy
- Metal
- Construction & Construction Materials
- Waste and Recycling
- Mining
- Chemical & Pharmaceuticals
- University / Academia / Research
- Electronics and Computers
- Glassware
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- Aerospace & Air Transport
- Plastics & Resins
- Health and Safety
- Communications / Telecom / Datacom
- Commercial
- Defense
- Travel & Leisure
- Retail
- Logistics
- Paint
- Maritime/Shipbuild/Water Transport
- Textile
- Government
- Packaging
- Forestry & Wood
- Publishing / Media / Marketing
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Household Appliances
- Printing
- Domestic
Xprt Product Applications In Denmark
1,264 applications found
There are many industrial operations that are producing waste water and process water that is at risk of contamination with e.g. lubricating oils or cooling oils. There is also significant use of cooling water at risk of contamination through leaks in heat exchangers and condensers. ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM
When ships discharge their bilge water the maximum level of hydrocarbons in the water is regulated by various Environmental Protection Agencies, for example there is a limit of 15ppm enforced by the IMO (International Maritime Organisation) in all international waters. Companies breaching these limits are liable to significant fines. Further regulations have been introduced to control the use of bunker fuels. The Marine Environment Protection Committee (MEPC) of the IMO has approved proposed amendments to ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM
Advanced optics manufacturing is now requiring much cleaner processing environments than were necessary in the past. Smaller device structures, use of shorter wavelengths, and higher laser power densities are all factors that make advanced components more susceptible to damage from contamination. Particle Measuring Systems can provide you with the tools to determine how clean your environment ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Determination of particle size distribution—Single particle light interaction methods. ISO 14644-1:2015 introduces the need for particle counters calibrated to ISO 21501-4. The calibration methods assure data accuracy and repeatability. The methods outlined in ISO 14644 and ISO 21501-4 represent an important step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of particle size distribution—Single particle light interaction methods, ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Particle Measuring Systems has put together a team of industry experts and solutions to help you better understand and meet 21 CFR Part 11. Start here by watching an on-demand webinar, reading a paper, viewing our particle counter and data management solutions, or submitting a question to our ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
We can offer you systems that are capable of operating in the harshest of environments. We design and manufacture a range of systems that meet some of your industries most challenging ...
ByOvarro based in Eckington, UNITED KINGDOM
Employ superior trace gas monitoring solutions for your most demanding indoor air quality challenges. Indoor environment monitoring spreads across multiple scientific fields and activity sectors. If you're a researcher, specialized consultant, equipment manufacturer, or building developer, indoor environment monitoring is critical to ensure optimal safety, operation, and testing conditions. Advanced Energy delivers leading-ege gas detection and measurement solutions that are ideal for building science, field ...
ByAdvanced Energy Industries, Inc. based in Denver, COLORADO (USA)
Verification of compliance with the maximum permissible exposure levels through measurements or calculations. Designation of noise zones and noise optimisation of ...
BySoundPLAN GmbH based in Backnang, GERMANY
Calculation of noise immissions from all relevant noise sources. If necessary, definition of noise quota allocation according to DIN 45691 for commercial and industrial sites or conception of noise protection measures (active/passive). Great support in planning optimisation, urban development competitions and in determining the development ...
BySoundPLAN GmbH based in Backnang, GERMANY
Non-contacting sludge blanket monitoring ensures that operators do not have to come into contact with the sludge. When used on primary settlement tanks the Sludge Finder 2 controls the de-sludging process to ensure a higher sludge density is recovered. When used on final settlement tanks it can be used to reduce the chances of a pollution event. The unique Sludge Finder 2 control system can also provide significant cost savings from less runtime on pumping systems and less energy spent on dewatering. By allowing ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Chamber and digester monitoring often refers to the part of the wastewater process where the solids are removed from the treated water and pumped to a chamber and/or digester ready for further processing. The range of technology at Pulsar means that the monitoring of this process becomes a lot easier and more efficient. An indication of tank level and flow rate can be given, providing operators full visibility of the process and an idea as to whether there is a blockage forming. Due to the nature of this ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Many mining applications use a settlement process - this is where all the particles and solids settle within tanks / clarifiers. In the past, measurements of these tanks have been labor intensive and puts operators at risk. Non-contacting interface measurement allows this process to be automated and reduce the health and safety issues that arise when trying to measure sludge interface ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
The monitoring and control of processes is crucial to ensure that plants are operating efficiently and effectively, preventing as much down time as possible and ensuring that they are operating to their full potential. This often means monitoring tank levels to ensure maximum stock / refill processes or monitoring flow to ensure that flows are running at capacity. Often, the measurement substance within the metals and mining industry can be extremely abrasive. Contacting magmeters are subject to increased risk of ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Drilling mud is usually pumped down the hollow drill pipe to the drill bit where it exits the pipe and is then flushed back up the brehole to the surface. Some muds are then discharged into the environment (via regulated methods), and others are recirculated back into the process for reuse. Pulsar Measurement provide flow solutions to ensure that drilling muds are flowing through pipes at the correct rate, giving an indication of blockages or issues within the process and aids oil and gas manufacturers with ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Storage tanks are used throughout the oil and gas industry for the bulk containment of fluids at different stages of the refinery process. More often than not, products will be stored for a short period of time before being transported for further processing. Pulsar Measurement offer both ultrasonic and radar technologies, along with a range of transducer faces to ensure the product is robust and resiliant against harsh atmospheric conditions. Accurate tank level and volume measurement eradicates the health and ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
A retention pond's primary use is to manage stormwater runoff to prevent flooding and downstream erosion, with the aim of improving water quality in an adjacent river, stream, lake or bay. Oil and Gas companies may use this particular form of water storage to perhaps mitigate flood risks of operations and/or to help the quality of water sources nearby, especially if they are discharging back into the environment. Non-contacting level measurement would be ideal for these applications as engineers don't need to go ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Fish Hatchery and Processing plants often need tight control over feed silos and to be able to monitor the constant flow of fresh water in fish ponds as well as keeping an eye on offal tanks. Pulsar Measurement's non-contacting technology has an advantage in this market, with its simple and easy installation and the fact that it does not come into contact with the application at all. It also aids health and safety compliance and helps to make the process simpler and easier for ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Carrots, Beets, Turnips, Cabbage, Broccoli, Cauliflower, Brussel Sprouts, Lettuce Etc: Dilute 1000 ml REZFREE® with 50 gal (200 Lt) water and apply directly to the 5.000 sets (bags) used in this cultivation. ...
ByTexas BioTechnology Inc based in Richmond, TEXAS (USA)
1st application: Time: during soil preparation or at planting. Soil or foliage: Soil. Amount and dilution rate: See the Table 1. Area: per 1 hectare ...
ByTexas BioTechnology Inc based in Richmond, TEXAS (USA)
Note: If pesticide residue degradation required dilute 2 liters (67oz) of RezFree with 1000 lt (264 gal) of water and spray on foliage 10-15 days before harvest on 1 hectare. Dilute 1000 ml REZFREE® with 50 gal (200 Lt) water and apply directly to the 5.000 sets (bags) used in this ...
ByTexas BioTechnology Inc based in Richmond, TEXAS (USA)