Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Medical / Health Care
- Oil, Gas & Refineries
- Environmental
- Agriculture
- Food and Beverage
- Air and Climate
- Energy
- Metal
- Waste and Recycling
- Mining
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- University / Academia / Research
- Electronics and Computers
- Glassware
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- Aerospace & Air Transport
- Plastics & Resins
- Health and Safety
- Communications / Telecom / Datacom
- Commercial
- Defense
- Travel & Leisure
- Retail
- Logistics
- Paint
- Maritime/Shipbuild/Water Transport
- Textile
- Government
- Packaging
- Forestry & Wood
- Publishing / Media / Marketing
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Household Appliances
- Printing
- Domestic
Xprt Product Applications In Denmark
1,254 applications found
FlowVision’s Micro SNCR system has been specifically developed for the small biomass boiler industry. As more stringent emission regulations are forced upon the small scale boiler sector, post combustion NOx reduction technology is needed to achieve the limits. The ideal solution is to install an SNCR system, however, conventional systems can be large and complicated. The FlowVision Micro SNCR system provides a compact cost effective solution to your NOx reduction needs. ...
ByFlowVision A/S based in Odense N, DENMARK
Ensure production quality in clean zones with superior air decontamination. Genano Technology® is scientifically proven to eliminate nano sized particles and eliminate 99,999% of microbes from indoor air. ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Create more efficient power ...
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
You might wonder what Operational Modal Analysis, OMA, is and how it differs from the traditional Experimental Modal Analysis (EMA) that has been around for the past few decades. Operational Modal Analysis is also called output-only modal analysis, ambient response analysis, ambient modal analysis, in-operation modal analysis, and natural input modal ...
ByStructural Vibration Solutions A/S based in Aalborg East, DENMARK
The highest standards of accuracy and reliability are required in laboratories and medical devices. STS products are perfectly suited to this purpose – an example is their use in pressure and measurements of dialysis ...
BySTS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND
The WERCS software suite provides more than just SDS authoring software. We provide tools, technology and services to improve your business processes and advance product stewardship. Through our regulatory compliance software, organizations gain efficiencies at multiple levels. Our SARA and VOC/HAPs reporting modules help to streamline environmental monitoring requirements. Raw material and new product introductions are streamlined through our chemical approval process module. We execute all facets of SDS ...
ByUL Solutions LLC- WERCS Studio based in Bentonville, ARKANSAS (USA)
Introducing the hospital grade disinfection solution to keep your staff and customers safe from the invisible microorganism threat in your shop, hotel, cruise ship, spa ...
ByUVD Robots, PART OF BLUE OCEAN ROBOTICS based in Odense, DENMARK
Use Eupry in laboratories for R&D, at Hospitals or for production according to GMP and GLP. Avoid time consuming logging and free up time for tasks that matter. With Eupry, accredited calibrations, real-time logging and online access is just a few features we ...
ByEupry based in Copenhagen, DENMARK
Cleanliness is the most important success factor when cleaning parts and surfaces. As it depends heavily on the quality of the rinse water used, looking after the individual rinses requires particular attention. Leading companies are already using vacuum distillation systems to treat used rinse water. And you too can benefit, because our VACUDEST vacuum distillation systems enables you to achieve top cleaning ...
ByH2O GmbH based in Steinen, GERMANY
Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using ...
ByH2O GmbH based in Steinen, GERMANY
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in Steinen, GERMANY
In industry water is used for various processes, e.g. for heating, for cooling, as steam to drive turbines, as a reaction medium and for cleaning. Depending on the application water requires a specific quality / ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in Berlin, GERMANY
Microbiologically influenced corrosion (MIC) is a potentially catastrophic result of unchecked bacterial activity and can seriously compromise well integrity and damage critical infrastructure. Bacteria can corrode oil production facilities, lead to the souring of wells, and counteract the reuse of flow-back water and produced water. Ultimately, this results in higher operating costs, reduced revenue, and severe environmental and health hazard. The traditional methods for detecting and enumerating bacteria in Oil ...
ByBactiQuant A/S based in Birkeroed, DENMARK
Krüger offer a unique grow-out solution: RAS2020 is a flexible, module-based recirculating aquaculture system with optimised process logistic, low operating costs and reduced ...
ByKrüger A/S - Veolia Water Technologies based in Søborg, DENMARK
Climate change and limited resources are some of the challenges faced by modern agriculture. By gathering essential information, IoT can help to smarter farming where you get the most out of your ...
ByMicro Technic A/S based in Aarup, DENMARK
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in Kangasala, FINLAND
Excess amounts of humid air entering a retail space can create an uncomfortable store ...
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
Commercial and public buildings must protect the health, safety and general well-being of those occupying the ...
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
ByDekati Ltd. based in Kangasala, FINLAND