- Home
- Applications
- europe
- coagulation
Show results for
Refine by
Coagulation Product Applications In Europe
36 applications found
It is performed with POLIPO CUT. Alternating cutting and coagulation enables achieving an optimal coagulation for this application and reduces the probability of bleeding. ...
ByEMED SP. Z O. O. SP. K. based in Opacz-Kolonia, POLAND
Premium
Mixing is already part of the equation and Medora Corporation equipment can help ensure your rapid mix is a true mix. Better coagulant dispersion & contact helps to further facilitate particulate binding. ...
ByIxom Watercare based in Dickinson, NORTH DAKOTA (USA)
Premium
INTRODUCTION: Aluminium is the most abundant metallic element and its salts are widely used as a coagulation treatment agent. At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
It is performed with PAPILLO CUT mode which uses alternating cutting and coagulation current. ...
ByEMED SP. Z O. O. SP. K. based in Opacz-Kolonia, POLAND
Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization of the polymer dosing heavily depends on the concentration of ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
A key element of this process is chemical dosing – the controlled addition of chemicals like chlorine, coagulants, and pH adjusters. But here’s the ...
ByKDV Flow Limited based in Leeds, UNITED KINGDOM
Collar skin incision. Coagulation of subcutaneous blood vessels with the use of bipolar forceps. ...
ByEMED SP. Z O. O. SP. K. based in Opacz-Kolonia, POLAND
Statiflo has the most extensive range of Motionless Mixers, for pipes and open channels, suitable for pre-treatment and post-treatment applications: Inlet blending, Disinfection and pH control, Coagulation and flocculation (floc mixer), Remineralisation, Brine dilution before sea outfalls. ...
ByStatiflo International Ltd. based in Macclesfield, UNITED KINGDOM
Our comprehensive range of products comprises flocculants and coagulants for solid-liquid separation processes. Together with our services we are able to offer to our customers a range of solutions specifically tailored to their needs while ensuring reliable process ...
ByBTC Europe GmbH based in Copenhagen V, DENMARK
Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
MUST's 'Molecular Unique Separation Technology' (MUST) addresses these challenges with the ECtop electro-coagulation process. Designed specifically for industrial use, ECtop enables on-site treatment of process water, ensuring it can be purified directly at production stages and reintegrated into the process ...
ByMUST Water Technology AG based in Winterthur, SWITZERLAND
We have a wide range of products for water treatment, highlighting organic coagulants and, especially, the exclusive flocculants from our HIMOLOC thecnology. ...
ByDerypol, S.A. based in Barcelona, SPAIN
Versatile blood research tool: Hemostasis monitoring of newly emerged anticoagulants especially during cardiac surgeries poses more and more challenges to standard diagnostic instrumentations. 3T developers have made pioneering contributions in QCM-D technology for the analysis of health-related whole blood parameters (Oberfrank et al, 2016; Sinn et al, 2011; 2010; Müller et al, 2010). Now the qCell T series provides a sophisticated platform with outstanding potential to face such challenging situations due ...
By3T Analytik GmbH & Co. KG based in Neuhausen ob Eck, GERMANY
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
We offer a world class range of products and formulated solutions including scale inhibitors, corrosion inhibitors, biocides, coagulants and flocculants all supported by teams of experts across ...
ByAdvanced Water Solutions - a business unit of Italmatch Chemicals based in Arese, ITALY
Statiflo supplies static mixers to the pulp and paper industry in all sizes and materials of construction including stainless steel, PTFE, Alloy 20, Hastelloys, titanium and FRP ...
ByStatiflo International Ltd. based in Macclesfield, UNITED KINGDOM
Grasping the haemorrhoid with the appropriate clamp. Tighten the ThermoStapler® tool at the base of the haemorrhoid and activate the current flow. After closing blood vessels, cut off the surplus mucus. In order to avoid damaging the rectum interior constrictor muscle, make sure not tocut off too large a piece of the mucous tissue. The ThermoStapler® vessel sealing system enables permanent sealing of large blood vessels and tissues during open and laparoscopic surgery. ...
ByEMED SP. Z O. O. SP. K. based in Opacz-Kolonia, POLAND
The paper industry is an industry that requires large amounts of water and energy. There are significant amounts of water consumption in a range such as 15-100 m3/ton in paper pulp production ...
ByGuven Aritma Muh. Tic. Ltd. Sti based in İzmit/Kocaeli, TURKEY
HIMOLOC Technology offers service companies, operators and refiners multiple opportunities to improve their production and ...
ByDerypol, S.A. based in Barcelona, SPAIN
The treatment differs according to the severity of the haemophilia, which is classified as mild, moderate or severe, depending on how much clotting factor is still detectable in the patient’s blood. Most patients have severe haemophilia A (residual activity of factor VIII less than ...
ByBiotest AG based in Dreieich, GERMANY