- Home
- Applications
- europe
- flame ionization detector
Show results for
Refine by
Flame Ionization Detector Product Applications In Europe
13 applications found
Premium
Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
Premium
Detecting CO2 impurities: Ammonia, Acetaldehyde, Benzene, Total Sulfur Content, Total Hydrocarbons, SO2, COS. Carbon dioxide (CO2) is a commonly used additive in food and beverage industry (e.g. for soft drink, brewery, and champagne carbonation). Its fabrication process can lead to the presence of impurities such as aromatics, BTEX, ammonia, acetaldehyde, Total Hydrocarbons and sulfur compounds (Total Sulfur Content, SO2, COS, ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
SCION Instruments offers the solution for a simulated distillation of middle distillates and lubricating base oils. In our latest Application Note, discover how the 8500 and 8300 GC platforms can be used for safer and more efficient simulated ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
SCION Instruments offers a solution for a simulated distillation of heavy distillate and residual fuel oils, according to standardized method IP507. Simulated Gas chromatography distillations can be used for control of refining operations. Standardized ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
The SCION Instruments 8X00 GC-platform provides a robust and complete solution for the simulated distillation of distillates and lubricating base oils, following standardized method EN15199-1. This Application Note demonstrate that this method and the ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
Premium
While the applications may be standard, the performance and quality of our systems are anything but. Every unit is engineered with precision and built to deliver exceptional reliability and accuracy, far exceeding typical ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
This application note presents the results of the determination of blood alcohol using headspace sampling. The HT3 headspace sampler is perfectly capable for the analysis of several volatile compounds in blood (ethanol), including acetaldehyde and ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
Current Total VOC Measurements The most common, and current standard, method for measuring Total Volatile Organic Compounds (VOC) is the use of a Flamed Ionisation Detector (FID). This gives a representative value of the total carbon content of a gas stream, as the FID cannot tell which specific organic compounds are ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
This application note will outline the use of the SCION Instruments HT3 and MOM to develop a method for running VPH compounds by dynamic headspace. Because the HT3 is equipped with a dynamic trapping system (sweep) it is capable of detecting low ppb ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)
The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements with a number of features specifi cally tailored for landfi ll gas monitoring ...
ByKurz Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)
The Oil & Gas industry is composed of three major components: upstream, midstream and downstream. The upstream industry finds and produces crude oil and natural gas. The midstream industry processes, stores, markets and transports commodities such as crude oil, natural gas and natural gas liquids. The downstream industry includes the oil refineries, petrochemical plants, petroleum product distributors and natural gas distribution companies.All of these operations contain many processes that require monitoring ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)