- Home
- Applications
- europe
- fluorescence spectrometer
Show results for
Refine by
Fluorescence Spectrometer Product Applications In Europe
24 applications found
With the superior sensitivity of Aurora's Atomic Fluorescence Spectrometer, the LUMINA 3300, direct measurement of mercury in water sample is ...
ByAurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA)
Environmental research is perfectly supported with Bruker AXS wavelength dispersive X-ray fluorescence spectrometers (WDXRF) S8 TIGER. Accurate and precise determination of hazardous elements down to the sub-ppm level, reliable identification of elements due to high spectral resolution, high analytical performance even for light elements: The TIGER are perfectly suited for these analytical ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
Photoluminescence excitation, emission and electroluminescence spectra were measured using an FLS980 Fluorescence Spectrometer equipped with a 450 W Xe lamp and double excitation and emission monochromators. ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Emission spectra were recorded in an FLS980 Fluorescence Spectrometer equipped with double excitation and emission ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
During the heating process dicalcium and tricalcium silicate, tricalcium aluminate, and a solid solution containing iron are formed. X-ray Fluorescence (XRF), a standard technique across the cement industry, is used to determine metal-oxide concentrations and oxide stoichiometry. The Rigaku NEX CG advanced Energy Dispersive X-ray Fluorescence (EDXRF) spectrometer, with its high sensitivity for light (low atomic number) elements, is the perfect cost-effective ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Air pollution, soils, grounds and wastewater Xenemetrix Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers bring expanded capabilities to environmental monitoring through the combination of proven detection methods with innovative technologies, including regulatory monitoring for compliance and ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Compliance with the RoHS and WEEE directives The Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers offer efficient solutions for the analytical requirements of the determination of regulated substances in electrical and electronic equipment according to the European Directive RoHS (Restriction of Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
The interest in non-invasive investigations for the study and identification of painting materials has greatly increased during the past two decades. The nature of museum objects is such that sampling is always kept to a minimum, thus, a spectroscopic ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Fluorescence anisotropy or polarisation provides a sensitive tool to measure the binding of ligands to proteins when a fluorophore is attached to the ligand. In this Application Note Polarised emission spectra were recorded in an FLS980 Fluorescence ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
A powerful method for determining the kinetics of a reaction is by monitoring the concentration of the reactants or products over time using stopped-flow fluorescence spectroscopy. In this application note, the kinetics of NATA quenching by QBS are ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Analytical Chemistry study with Xenemetrix ED-XRF Modern research deals with the development of new forms of diagnostic technologies for different purposes, such as solutions for laboratory needs, devices and methods that deliver accurate and reliable results at a very high level of ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Fingerprinting all kinds of materials analyzed in forensic analysis Forensic scientists generally require fast and non-destructive analysis of a very wide range of materials. Often these materials are presented in very small quantity, as evidence collected from a crime scene. Using ED-XRF allows to measure a wide range of elements and concentrations: C(6)-Fm(100), without any need of sample preparations. Samples can be measured in many different formats such as powder, solid, liquid or in thin ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Persistent luminescence, commonly called afterglow, is long-lasting visible emission over several hours after ultraviolet excitation. It has many applications; ranging from glow-in-the-dark signage to in-vivo imaging for disease diagnosis and treatment. ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Förster resonance energy transfer (FRET) is a phenomenon of non-radiative transfer of the optical excitation from an excited electronic level of one molecule, called the donor, to a resonant electronic level of another molecule, called the acceptor. In ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Museum curators, art historians, and archeologists analysis to alert Art, artifact and antique analysis can be done using non-destructive, fast and simple XRF methods to identify what items are made of. Art historians, archeologists and conservators are constantly concerned with the questions of where, when and by whom an object was made. Investigations of physical properties and especially chemical composition of artifacts are helpful and increasingly applied to allocate an object to a particular historic or ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Mining is the extraction of valuable minerals or other geological materials from the earth, usually from an ore body, vein, or (coal) seam. Materials recovered by mining include base metals, precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt, and potash. Whether the determination entails the measurement of ores, feed, slags, or tailings in the mining process, X-ray Fluorescence (XRF) spectroscopy is one of the most commonly employed techniques for these routine determinations of ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Plastics, polymers and rubber are combined with a variety of different additives in order to give them properties that are important for many different markets. These products are commonly analyzed as beads, which in their end form are pressed or molded into ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Polymers and plastics are materials composed of repeating hydrocarbon structural units, typically connected by covalent chemical bonds. Today, polymers can be found everywhere, with a range of applications far exceeding that of any other traditional material, from packaging materials, adhesives, foams, plastic containers, textiles, fibers, and construction parts in airplanes and automobiles. The list of polymers includes: Rubber, Bakelite, Neoprene, Polypropylene (PP), Polystyrene (PS), High impact polystyrene ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
In this application note the dynamics of charge carriers in copper-nitrogen-titanium oxide are studied using time-resolved photoluminescence spectroscopy on the FLS980 Photoluminescence ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Quality control of coating and thin film analysis All industrial operations have processes in place to ensure efficiency and safety standards. Xenemetrix systems are perfectly suitable for complementing these ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL