- Home
- Applications
- europe
- profiling system
Refine by
Profiling System Product Applications In Europe
22 applications found
Our laser profile measurement systems are used for non-contact scanning of the refractory lining in metallurgic reaction and transport vessels, like converters, EAFs, torpedo ladles and steel casting ladles, as well as in open die forging shops. ...
ByCETCO based in New York, NEW YORK (USA)
Premium
As technology pushes forward, surfaces are being manufactured with exacting control and the need to measure surface texture with high precision and accuracy has become even more critical. When it comes to roughness measurements, there are 3 important factors: measuring the surface, processing the data, and reporting the ...
ByZygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA)
Premium
Beyond surface characterization, Zygo solutions offer feedback from the metrology setup to aspheric and freeform surface ...
ByZygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA)
With more than 300 000 expected attendees, the French National Police needed a flexible solution to secure the site and manage the crowd flows throughout the entire week, with the ability to zoom in on specific elements and be able to follow a target at all ...
ByElistair Inc based in Stoughton, MASSACHUSETTS (USA)
Premium
Measuring volumetric properties of a surface is most often used in wear analysis of lubricated surface but has uses in many other applications such as adhesion, porosity, and particle ...
ByZygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA)
Premium
ZYGO 3D optical profiler products utilize non-contact coherence scanning interferometry (CSI) technology to offer precise, rapid and quantitative surface metrology of form and roughness for improved part quality and manufacturing yields. Our field-proven and innovative solutions enable our customers to control their current machining processes, while providing the insight to analyze and solve manufacturing challenges as they ...
ByZygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA)
Recently, it has emerged that an ideal analytical tool is one that can assess the systemic redox profile by analysing a capillary blood sample (Antioxid Redox Signal. 2020, doi: ...
ByH & D S.r.l. based in Parma (PR), ITALY
Increase home comfort with acoustic solutions from Merford. Noises in the home can be very annoying. Whether noise from a device or installation in the home, from the neighbours or from another source outside – all of these things affect quality of life. Too much noise can also be bad for your health. Our experts are ready and waiting to help you improve the acoustic comfort in both existing homes and new ...
ByMerford based in Gorinchem, NETHERLANDS
Premium
Micro-electromechanical systems, or MEMS, have become critical components in a variety of consumer and industrial products, including things inkjet printers, cellular phones and accelerometers for automobile airbags. MEMS devices are typically manufactured in high volumes, often using modified semiconductor processes, to exacting specifications. For MEMS manufacturers to meet high production standards, these devices need to be measured at various steps of the design, fabrication and production ...
ByZygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA)
Manage exposure to risk, improve operational efficiency and develop better insurance and lending offers with leading AgTech for FinTech and ...
ByEarthDaily Agro, by Geosys Holdings ULC based in BALMA Cedex, FRANCE
Semiconductor device fabrication is the process used to create the integrated circuits (silicon chips) that are present in everyday electrical and electronic devices. It is a multiple-step sequence of photographic and chemical processing steps during which electronic circuits are gradually created on a wafer made of pure semiconducting material. Silicon is the most commonly used semiconductor material today, along with various compound semiconductors. The entire manufacturing process, from start to packaged chips ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Large amounts of waste are produced in offices; and a lot of it is made up of paper and incinerable waste that should be recycled as far as possible. A vacuum system from Envac can be used to handle this waste easily, and at the same time it adds other ...
ByEnvac AB based in Stockholm, SWEDEN
Modern Portland cement is made by mixing substances containing lime, silica, alumina, and iron oxide and then heating the mixture until it almost fuses. During the heating process dicalcium and tricalcium silicate, tricalcium aluminate, and a solid solution containing iron are formed. X-ray Fluorescence (XRF), a standard technique across the cement industry, is used to determine metal-oxide concentrations and oxide stoichiometry. The Rigaku NEX CG advanced Energy Dispersive X-ray Fluorescence (EDXRF) spectrometer, ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Metal alloys are materials made of two or more metals or a metal and another material; therefore, mechanical properties like hardness and strength are attributed to a precise composition or stoichiometry. Chemical analysis is typically used as a basis for classifying metals and alloys, controlling their production processes, or verifying their designation. Energy Dispersive X-ray Fluorescence (EDXRF) is a routine used to identify and classify metals and alloys. Foundries, smelters, and mills, as well as other ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Used catalytic converters are collected and recycled in order to reclaim the precious metals Pt, Rh and Pd. Typically, the entire honeycomb core is removed and ground into fine powder. Once in powder form, the precious metal catalysts can be extracted, or the powder can be sold to a refiner. The honeycomb core is typically ceramic, containing combinations of the elements Al, Si, Fe, Zn, Sr, Zr, Ba, La and Ce. Some cores can be made of a stainless steel honeycomb and so would contain higher Fe and other metals. ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Mining is the extraction of valuable minerals or other geological materials from the earth, usually from an ore body, vein, or (coal) seam. Materials recovered by mining include base metals, precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt, and potash. Whether the determination entails the measurement of ores, feed, slags, or tailings in the mining process, X-ray Fluorescence (XRF) spectroscopy is one of the most commonly employed techniques for these routine determinations of ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Polymers and plastics are materials composed of repeating hydrocarbon structural units, typically connected by covalent chemical bonds. Today, polymers can be found everywhere, with a range of applications far exceeding that of any other traditional material, from packaging materials, adhesives, foams, plastic containers, textiles, fibers, and construction parts in airplanes and automobiles. The list of polymers includes: Rubber, Bakelite, Neoprene, Polypropylene (PP), Polystyrene (PS), High impact polystyrene ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the 'Treated effluent' is often well above the levels witch are applicable for wastewater in ...
ByWeidner Ireland Ltd based in , IRELAND
Marine image profiling using our unique SuperSting Marine ...
ByAdvanced Geosciences Inc. (AGI) based in Austin, TEXAS (USA)
European Union (EC) environmental legislation contributes towards a better environment but has significant implications for many manufacturing companies in terms of marketing, design, manufacturing, and "end-of-life" recovery and recycling. The Directives on Waste Electrical and Electronic Equipment (WEEE), 2002/96/EC, and the Restriction of Use of Certain Hazardous Substances (RoHS), 2002/95/EC, will require producers to recycle waste electrical/electronic equipment and remove certain hazardous substances. ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)