europe
Applications

Xprt Product Applications In Europe

10,193 applications found

In Europe Available In Europe Near Europe

Ultraviolet disinfection systems for the ultrapure water B.O.P. hydraulic operation & subsea control fluid treatment

Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of ...

Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM

Ultraviolet disinfection systems for the pipeline hydrotesting & flooding water

Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...

Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM

Biofilm Sensor for Open Cooling Towers

In industrial cooling towers, bacterial growth on surfaces (biofilm) causes serious problems, both contributing to the deterioration of materials and, most important, increasing the risk of harmful microbiological contaminations (e.g. Legionella pneumophila). For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such ...

ByAlvim Srl based in Genova, ITALY

Biofilm Sensor for Cooling Towers

In industrial cooling towers, biofilm growth can cause serious problems, both contributing to the deterioration of materials and, most important, increasing the risk of harmful microbiological contaminations (e.g. Legionella). For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such systems. The manager of this cooling tower planned to automatically dose chlorine continuously (24/7) in the water; later on, he decided to install an ALVIM probe in the plant, ...

ByAlvim Srl based in Genova, ITALY

Biofilm Sensor for Power Plants

In a heat exchanger, a major component of any power plant, a 20 microns thick bacterial layer (biofilm) can cause a 30% decrease in thermal efficiency: biofilm, indeed, is up to 4 times more insulating than calcium carbonate scale. Moreover, biofilm can increase inorganic fouling, producing sticky substances that increase particles adhesion. For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such systems. The manager of this power plant decided to install ...

ByAlvim Srl based in Genova, ITALY

Membrane Water Treatment and Monitoring Products for Boiler and Cooling

Modern Water’s ATP test is the first step in determining the effectiveness of a biocide treatment program. Microbiological growth within a cooling water system if not controlled can result in the formation of biological fouling layers (biofilm) on all surfaces in contact with the ...

ByModern Water based in Sand Hutton, UNITED KINGDOM

Biofilm Sensor for Legionella Prevention

Even when it has not been created by pathogenic bacteria, biofilm is the ideal environment for the survival and growth of pathogens, includingLegionella pneumophila. It is well known that such bacteria do not usually form biofilms by themselves, but they are commonly found in biofilms made by other bacteria. This kind of environment greatly increases Legionella possibility of survival and growth. Thus, the best way to prevent Legionella outbreaks is limiting biofilm ...

ByAlvim Srl based in Genova, ITALY

Drinking Water Disinfection System for Process Water

Replace expensive and harmful chemicals with a system that allows you to make a sustainable and proven effective disinfectant yourself on site. This means that you are assured of structurally germ-free ...

ByWatter B.V. based in Tynaarlo (Drenthe), NETHERLANDS

Microbiologically Influenced Corrosion (MIC) Monitoring for Oil & Gas Industry

Microbiologically influenced corrosion (MIC) is a potentially catastrophic result of unchecked bacterial activity and can seriously compromise well integrity and damage critical infrastructure. Bacteria can corrode oil production facilities, lead to the souring of wells, and counteract the reuse of flow-back water and produced water. Ultimately, this results in higher operating costs, reduced revenue, and severe environmental and health hazard. The traditional methods for detecting and enumerating bacteria in Oil ...

ByBactiQuant A/S based in Birkeroed, DENMARK

Advanced water purification technologies EDI for power generation sector

SnowPure provides EDI modules for power generation market, since 2002. Power plants around the globe utilize our Electropure electrodeionization (EDI) including plants in the United States, China, Europe, and the Middle East. With our high capacity EXL™ EDI product we are able to serve a greater share of the boiler feedwater high purity water ...

BySnowPure Water Technologies based in San Clemente, CALIFORNIA (USA)

Advanced water purification technologies for pharmaceutical, medical, & laboratory sector

SnowPure has provided EDI technology to the pharmaceutical and medical markets since 1987. We have installations in over 75 countries including the United States, India, Europe, Japan, Argentina, and China. Our electrodeionization and UV products are integral components in validated installations that comply with the harmonized USP (US Pharmacopoeia), JP (Japanese Pharmacopoeia), and EP (European Pharmacopoeia) standards for PW (Purified Water) and WFI (Water for ...

BySnowPure Water Technologies based in San Clemente, CALIFORNIA (USA)

Advanced water purification technologies for semiconductor and electronics industry

High-technology industries use ultrapure water in their manufacturing. SnowPure’s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these ...

BySnowPure Water Technologies based in San Clemente, CALIFORNIA (USA)

Advanced water purification technologies for custom applications

SnowPure has developed a number of special modules for custom applications. These include: Removal of chloride from recycled antifreeze. Recycling of plating rinsewater for reuse. Concentration of trace metals for recovery. Conversion of organic salts to their organic acids (conversion of sodium acetate to acetic acid). Conversion of inorganic salts to acid streams and base ...

BySnowPure Water Technologies based in San Clemente, CALIFORNIA (USA)

Water monitoring technology for coastal & estuary sector

Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-Bird Scientific offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications. Sea-Bird Scientific water quality ...