Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Air and Climate
- Energy
- Oil, Gas & Refineries
- Environmental
- Mining
- Construction & Construction Materials
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Medical / Health Care
- Metal
- Pulp & Paper
- Waste and Recycling
- Glassware
- Automobile & Ground Transport
- Electronics and Computers
- University / Academia / Research
- Packaging
- Health and Safety
- Soil and Groundwater
- Defense
- Plastics & Resins
- Aerospace & Air Transport
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Paint
- Printing
- Communications / Telecom / Datacom
- Commercial
- Government
- Logistics
- Textile
- Travel & Leisure
- Domestic
- Retail
Xprt Product Applications In Finland
1,338 applications found
Altum Technologies offers advanced fouling removal and prevention solutions for pipes, effectively addressing the critical issue of scaling deposits. Scaling, a result of ion buildup inside pipes, leads to significant industrial challenges such as altered flow rates, pressure, and temperature changes. This constriction impedes material flow leading to pipeline blocking, causing costly production downtimes. Altum Technologies leverages ZPD ultrasonic technology, which provides an efficient and reliable method for ...
ByAltum Technologies Oy based in Helsinki, FINLAND
Altum Technologies offers advanced ZPD ultrasonic technology specifically designed for cleaning fouling and scaling in pumps and valves, ensuring zero process downtime. Scaling in pumps can lead to excessive wear, reduced pumping efficiency, and increased energy costs. Similarly, fouling in valves can result in compromised process efficiency and control precision. By effectively utilizing power ultrasound, this technology addresses scaling deposits on impellers, housings, bearings, shafts, and motors without ...
ByAltum Technologies Oy based in Helsinki, FINLAND
Instruments for anaerobic batch and continuous fermentation tests. The anaerobic batch fermentation test is a well-established test system for the determination of the biogas potential and biochemical methane potential (BMP) of organic materials, specific methanogenic activity (SMA), residual gas potential (RGP) and substrate inhibition. Several standards and guideline are available for performing batch anaerobic fermentation tests, such as VDI 4630 (2016) and ISO 11734 (1995). These laboratory-based tests ...
ByBPC Instruments AB based in Lund, SWEDEN
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Create more efficient power ...
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
We are the world’s leading supplier of UV water treatment packages for the oil, gas and petrochemical industry. With over 35 years experience in both onshore and offshore sectors, atg UV has worked closely with the world’s leading oil and gas operators, service companies and design contractors to deliver innovative, robust and reliable water treatment solutions for a range of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide. atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Ensure production quality in clean zones with superior air decontamination. Genano Technology® is scientifically proven to eliminate nano sized particles and eliminate 99,999% of microbes from indoor air. ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND
Cleanliness is the most important success factor when cleaning parts and surfaces. As it depends heavily on the quality of the rinse water used, looking after the individual rinses requires particular attention. Leading companies are already using vacuum distillation systems to treat used rinse water. And you too can benefit, because our VACUDEST vacuum distillation systems enables you to achieve top cleaning ...
ByH2O GmbH based in Steinen, GERMANY
Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using ...
ByH2O GmbH based in Steinen, GERMANY
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in Steinen, GERMANY
The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Teledyne Tekmar is the laboratory's choice for the analysis of gasoline additives, sight evaluation to determine underground storage tank integrity, and oil profiling. The complex processes involved in the petrochemical industry result in the production and management of Volatile Organic Compounds (VOCs) and Total Organic Carbon. Teledyne Tekmar is there to make sure the measuring and monitoring of these compounds is indisputable, accurate and ...
ByTeledyne Tekmar based in Mason, OHIO (USA)
Incinerator Bottom Ash (IBA) is the material discharged through the grate of a Waste to Energy facility after incineration of municipal solid waste (MSW). Depending on the waste being incinerated IBA can contain varying quantities of glass, ceramics, brick, concrete and metals in addition to clinker and ...
ByKiverco Ltd. based in Dungannon, NORTHERN IRELAND