Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Air and Climate
- Energy
- Oil, Gas & Refineries
- Environmental
- Mining
- Construction & Construction Materials
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Medical / Health Care
- Metal
- Pulp & Paper
- Waste and Recycling
- Glassware
- Automobile & Ground Transport
- Electronics and Computers
- Packaging
- University / Academia / Research
- Health and Safety
- Soil and Groundwater
- Defense
- Plastics & Resins
- Aerospace & Air Transport
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Commercial
- Paint
- Printing
- Communications / Telecom / Datacom
- Logistics
- Government
- Domestic
- Retail
- Textile
- Travel & Leisure
Xprt Product Applications In Finland
1,338 applications found
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
One of the key security challenges in the present day world is the border security. The concern for increasing activity in terrorism as well as smuggling of illegal substances across the borders requires advanced detection technologies and close co-operation between the authorities and the instrument manufacturers. In particular, the deployment of practical efficient means to detect hidden persons and illegal substances at border crossing points is an instrumental challenge. The required trace gas analyzer, which ...
ByGasera Ltd based in  Turku, FINLAND
Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal's EyeCGas Optical Gas Imaging camera, for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in ...
ByOPGAL based in  Karmiel, ISRAEL
ByHORIBA Europe GmbH based in  Leichlingen, GERMANY
LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in  Skedsmokorset, NORWAY
LaserGas measurements Preheater exit, CO monitoring Electrostatic precipitators (ESP) after pre-heaters, CO monitoring for explosion prevention Coal silo, CO monitoring Exit of coal mill, dust filter, CO monitoring Stack gas emissions, HCl and HF LaserDust measurements Stack gas emissions Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in  Skedsmokorset, NORWAY
The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM