- Home
- Applications
- finland
- sample gas
Refine by
Sample Gas Product Applications In Finland
24 applications found
Premium
Check our LNI Swissgas range of gas generators for Sample Evaporation ...
ByLNI Swissgas based in Versoix, SWITZERLAND
At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its ...
ByMetrohm AG based in Herisau, SWITZERLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Tekran Instruments are versatile. We offer a number of tools to expand the capability of our instrumentation. Unlike any other mercury instrument manufacturer, Tekran offers multiple options for automated mercury speciation measurements in air, emission sources and environmental samples. Additionally, our software provides full access to all instrument features allowing complete method customization. Below are examples of expanded measurement applications that utilize the unique adaptability of Tekran ...
ByTekran Instruments Corporation based in Toronto, ONTARIO (CANADA)
In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Comparison of Technologies A gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
One of the main hazards in a power station is a fire in a coal rich environment; the latter can often become an explosion with consequential damage to human life and capital ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
With the advent of specific process emission limits being defined, continuous particulate monitoring has become a regulatory requirement for many industries. smoke stack #1Particulate monitoring requires the measurement of the mass concentration of particulate matter in stack emissions to atmosphere. There is no known method of continuously measuring particulate concentration by direct measurement and therefore, all continuous particulate measurement methods are inferential. Each method involves the ...
ByDynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM
USP37 Medical Gas requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. Following the appropriate United States Pharmacopeia standards, in this case specifically USP37, requires an analyzer which uses a paramagnetic based technology. The Systech Illinois Paramagnetic Oxgyen Analyzer PM700 is perfectly suited for this medical gas analysis ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM
Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Minimising costs through TOC measurement of CO2 concentration. Both water suppliers and water users need to know the quality of the water they are supplying, using and disposing of in order to minimise their costs. One measure of water quality is Total Organic Carbon (TOC) Analysis. TOC is the amount of carbon that is found in an organic compound. It has become an important indication of approximate levels of organic contamination and can therefore be used as a suggestion of water quality. In many cases, TOC ...
ByEdinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM
Not a day goes by in modern hospitals and health care institutions without the use of inhaled anesthetics for general anesthesia. Inhaled anesthetics have seen a great improvement over time. Anesthetic effect is being safer for patients and health care workers. However, occupational exposure to waste anesthetic gases (WAG) is far from being a problem solved. It is well agreed to keep the occupational exposure to a reasonable minimum by improved scavenging, ventilation and working habits alongside following ...
ByGasera Ltd based in Turku, FINLAND
Batch in-vitro digestibility assay for ruminants and monogastric animals. For the purpose of feed and food evaluation, in-vitro digestion and fermentation methods are ethically superior, faster and less expensive than in-vivo techniques. ...
ByBPC Instruments AB based in Lund, SWEDEN
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
What are siloxanes? The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas generated is a form of renewable energy. Organosilicon compounds are often present in products such as shampoo and cosmetics, as well as industrial products and lubricants, and they move into land-fill. These volatile compounds find their way into land-fill or digester gases as ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in Middlewich, UNITED KINGDOM