Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Air and Climate
- Energy
- Oil, Gas & Refineries
- Environmental
- Mining
- Construction & Construction Materials
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Medical / Health Care
- Metal
- Pulp & Paper
- Waste and Recycling
- Glassware
- Automobile & Ground Transport
- Electronics and Computers
- University / Academia / Research
- Packaging
- Health and Safety
- Soil and Groundwater
- Defense
- Plastics & Resins
- Aerospace & Air Transport
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Paint
- Printing
- Communications / Telecom / Datacom
- Commercial
- Government
- Logistics
- Textile
- Travel & Leisure
- Domestic
- Retail
Xprt Product Applications In Finland
1,338 applications found
Sustainable Power Batteries for Life. Geyser Batteries offer the transportation industry a sustainable solution to help OEMs to meet the toughest CO2 emissions standards. The unique combination of ultra high specific power (kWs per kg), durability (over one million cycles) and good energy density of over 10 Wh/kg achieved even at overly high discharge rate, makes Geyser Batteries an ideal solution for a wide range of applications. These include low-voltage mild-hybrids, high-voltage full-hybrid powertrains, ...
ByGeyser Batteries Oy based in  Mikkeli, FINLAND
An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which ...
ByOPGAL based in  Karmiel, ISRAEL
Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
In desalination plants it is of great importance for the operation of the entire plant that the pre-treatment of the water is good before the salt is to be removed. For reverse osmosis (RO) desalination plants a good pre-treatment is essential for avoiding membrane fouling, resulting in reduced water production and increased operational ...
ByFiltralite - Leca Norge ASFiltralite based in  Rælingen, NORWAY
Filter beds with pre-filter are simple, efficient and environmentally friendly ways of treating domestic wastewater from detached houses and holiday homes. The requirements related to operation and maintenance are few in relation to traditional compact plants. These systems can also be adapted to suit clusters of houses, schools, kindergartens, small companies ...
ByFiltralite - Leca Norge ASFiltralite based in  Rælingen, NORWAY
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in  Falmouth, UNITED KINGDOM
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Ammonia (NH3) is formed from the breakdown of urea in slurry and manure, and hence this is the main source of NH3 emission in the UK. High levels of NH3 emissions can cause a large amount of environmental damage to vegetation. As well as the outward environmental impact, high NH3 concentrations in and around livestock enclosures have a detrimental effect on the health and well-being of the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years. ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Reciprocating internal combustion engines burning natural gas are a source of formaldehyde emissions. There are strict tolerances imposed on operators of engines to ensure that formaldehyde is removed effectively and that formaldehyde emissions are below published limits. The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM