Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Air and Climate
- Energy
- Oil, Gas & Refineries
- Environmental
- Mining
- Construction & Construction Materials
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Medical / Health Care
- Metal
- Pulp & Paper
- Waste and Recycling
- Glassware
- Automobile & Ground Transport
- Electronics and Computers
- University / Academia / Research
- Packaging
- Health and Safety
- Soil and Groundwater
- Defense
- Plastics & Resins
- Aerospace & Air Transport
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Paint
- Printing
- Communications / Telecom / Datacom
- Commercial
- Government
- Logistics
- Textile
- Travel & Leisure
- Domestic
- Retail
Xprt Product Applications In Finland
1,338 applications found
In cleaning industry luciferase based assays of ATP and ATP+AMP is used for hygiene control in food and beverage industry, restaurants, hospitals and pharma industry. It is also used to develop improved cleaning tools and procedures and for education of cleaning personnel. The advantages area that an objective result is obtained, that seller and purchaser can agree on a measurable degree of cleanliness and that the cleaning personnel can perform the test in less than one minute using a portable instrument ...
ByBioThema AB based in  Handen, SWEDEN
The Master Magnets range of equipment protects crushers and other processing machinery from damaging tramp metals. Magnetic Separators are also used to remove any metal contamination from within the final product to ensure optimum cleanliness and maximum product ...
ByBunting - Redditch based in  Redditch, UNITED KINGDOM
Powerful magnetic separators for the removal of tramp metal from raw materials and for removal of fine iron from ceramic slips and glazes. High intensity electro magnetic filters give maximum levels of ...
ByBunting - Redditch based in  Redditch, UNITED KINGDOM
Master Magnets have an extensive range of magnets for protecting downstream processing machinery from tramp metals in Mining applications. We also offer specialist high gradient magnetic separators for final mineral processing. ...
ByBunting - Redditch based in  Redditch, UNITED KINGDOM
Master Magnets equipment is used in many recycling applications such as the recycling of automobiles, electrical goods, skip waste, domestic waste, in fact wherever there is a need to separate metals from other ...
ByBunting - Redditch based in  Redditch, UNITED KINGDOM
A wide range of equipment such as Drum Magnets and Overbands can be utilised to separate ferrous metals in steelworks and slag processing ...
ByBunting - Redditch based in  Redditch, UNITED KINGDOM
The highest standards of accuracy and reliability are required in laboratories and medical devices. STS products are perfectly suited to this purpose – an example is their use in pressure and measurements of dialysis ...
BySTS Sensor Technik Sirnach AG based in  Sirnach, SWITZERLAND
Teledyne Tekmar is the laboratory's choice for the analysis of gasoline additives, sight evaluation to determine underground storage tank integrity, and oil profiling. The complex processes involved in the petrochemical industry result in the production and management of Volatile Organic Compounds (VOCs) and Total Organic Carbon. Teledyne Tekmar is there to make sure the measuring and monitoring of these compounds is indisputable, accurate and ...
ByTeledyne Tekmar based in  Mason, OHIO (USA)
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Incinerator Bottom Ash (IBA) is the material discharged through the grate of a Waste to Energy facility after incineration of municipal solid waste (MSW). Depending on the waste being incinerated IBA can contain varying quantities of glass, ceramics, brick, concrete and metals in addition to clinker and ...
ByKiverco Ltd. based in  Dungannon, NORTHERN IRELAND
Cleanliness is the most important success factor when cleaning parts and surfaces. As it depends heavily on the quality of the rinse water used, looking after the individual rinses requires particular attention. Leading companies are already using vacuum distillation systems to treat used rinse water. And you too can benefit, because our VACUDEST vacuum distillation systems enables you to achieve top cleaning ...
ByH2O GmbH based in  Steinen, GERMANY
Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using ...
ByH2O GmbH based in  Steinen, GERMANY
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in  Steinen, GERMANY
Iron removal is usual water treatment when using ground water as raw water for making potable water. For this SansOx has delivered a solution called IroX that consists of OxTube, possibly GasRemox and sand filters. This solution can be installed into separate container or inside of the pump house. Both systems can be installed also afterwards to the water system. ...
BySansox Oy based in  Lahti, FINLAND
Munters equipment precisely controls temperature and humidity to provide optimal conditions, prevent the growth of harmful bacteria and viruses, and also improve doctor and patient ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Ensure production quality in clean zones with superior air decontamination. Genano Technology® is scientifically proven to eliminate nano sized particles and eliminate 99,999% of microbes from indoor air. ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in  Espoo, FINLAND
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Create more efficient power ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
ByDekati Ltd. based in  Kangasala, FINLAND