Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Air and Climate
- Energy
- Oil, Gas & Refineries
- Environmental
- Mining
- Construction & Construction Materials
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Medical / Health Care
- Metal
- Pulp & Paper
- Waste and Recycling
- Glassware
- Automobile & Ground Transport
- Electronics and Computers
- University / Academia / Research
- Packaging
- Health and Safety
- Soil and Groundwater
- Defense
- Plastics & Resins
- Aerospace & Air Transport
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Paint
- Printing
- Communications / Telecom / Datacom
- Commercial
- Government
- Logistics
- Textile
- Travel & Leisure
- Domestic
- Retail
Xprt Product Applications In Finland
1,338 applications found
applications that include: Agricultural and landscape irrigation Aquaculture Industrial water processing Industrial wastewater treatment Municipal water treatment (drinking and waste treatment) Prefiltration to protect costly media and reverse-osmosis ...
ByAmiad Water Systems Ltd. based in , ISRAEL
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
Filtralite is suitable for use in a lot of different potable water treatment processes, such as: Biological treatment, Physical filtration, Pre-treatment for ...
ByFiltralite - Leca Norge ASFiltralite based in Rælingen, NORWAY
Filtralite is suitable for use in different effluent water treatment processes, both for municipal and industrial effluents, such as: Biological treatment, Tertiary filtration, Odour ...
ByFiltralite - Leca Norge ASFiltralite based in Rælingen, NORWAY
LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in Skedsmokorset, NORWAY
LaserGas measurements Preheater exit, CO monitoring Electrostatic precipitators (ESP) after pre-heaters, CO monitoring for explosion prevention Coal silo, CO monitoring Exit of coal mill, dust filter, CO monitoring Stack gas emissions, HCl and HF LaserDust measurements Stack gas emissions Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in Skedsmokorset, NORWAY
The history of air pollution regulation dates back as far as the 13th century when in 1273, Edward I (Longshanks) of England prohibited the burning of sea coal in London. The smoke produced by its combustion was considered detrimental to human health. By the late 19th and early 20th centuries, regulations were being passed that sought to control air pollution predominantly for smoke and odour control. Traditionally, regulators were concerned with the visual impact of the discharge from a stack or chimney. ...
ByDynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM
With the advent of specific process emission limits being defined, continuous particulate monitoring has become a regulatory requirement for many industries. smoke stack #1Particulate monitoring requires the measurement of the mass concentration of particulate matter in stack emissions to atmosphere. There is no known method of continuously measuring particulate concentration by direct measurement and therefore, all continuous particulate measurement methods are inferential. Each method involves the ...
ByDynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM
In recent years, new regulations have been introduced governing emissions from ships. With the International Maritime Organization (IMO) adopting Annex VI of MARPOL designed to limit sulphur oxides (SOx), nitrous oxides (NOx) and particulate matter emissions, as well as introducing emission control areas (ECAs) to reduce emissions of those air pollutants further in designated sea areas, ship owners/operators can face hefty fines for failing to meet these new requirements on the “polluter pays” ...
ByDynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Metal-working factories generate a lot of oily effluent as a result of manufacturing processes. The coolant emulsions tailored to the individual application contain oils, waxes, greases and preservatives, as well as a cocktail of ingredients to improve product properties. The emulsions used must not be discharged untreated into the drain system or open bodies of water; they must be disposed of at high ...
ByH2O GmbH based in Steinen, GERMANY
Reliably distilling complex and heavy metals: VACUDEST in electroplating applications. No company applying electroplating likes having to deal with the issue of “wastewater”. But what happens when authorities take samples of the wastewater unannounced, and finds the nickel limit has been well exceeded? A horror scenario resulting in a lot of stress, work and ...
ByH2O GmbH based in Steinen, GERMANY
Using innovative recycling technologies in vibratory grinding processes. Rinse water from vibratory grinding processes ca be contaminated with heavy metals, oils and, depending on the process, even a variety of chemicals. It cannot be discharged into the public sewer system, and usually requires to be disposed of with specialized waste management companies expensivly. But there are alternatives: Vacuum distillation with VACUDEST evaporators is an economical, resource-friendly method for treating this industrial ...
ByH2O GmbH based in Steinen, GERMANY
Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)