Refine by
Industries served
- Monitoring and Testing
- Manufacturing, Other
- Water and Wastewater
- Air and Climate
- Medical / Health Care
- Agriculture
- Environmental
- Oil, Gas & Refineries
- Energy
- Food and Beverage
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Waste and Recycling
- Mining
- Automobile & Ground Transport
- Metal
- Pulp & Paper
- University / Academia / Research
- Electronics and Computers
- Aerospace & Air Transport
- Soil and Groundwater
- Glassware
- Health and Safety
- Defense
- Plastics & Resins
- Paint
- Commercial
- Communications / Telecom / Datacom
- Travel & Leisure
- Packaging
- Maritime/Shipbuild/Water Transport
- Government
- Forestry & Wood
- Printing
- Real Estate
- Textile
- Retail
- Logistics
- Dry Cleaning
- Banking & Finance / Insurance / Legal
- Publishing / Media / Marketing
Xprt Product Applications In France
2,274 applications found
The highest standards of accuracy and reliability are required in laboratories and medical devices. STS products are perfectly suited to this purpose – an example is their use in pressure and measurements of dialysis ...
BySTS Sensor Technik Sirnach AG based in  Sirnach, SWITZERLAND
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric monitor that directly measures mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS
Designed for Testing Laboratories. Capabilities in an extensive range of commodities. Providing independent inspection. Sampling and testing services 24 hours a day, 365 days of the ...
ByPhotovolt Instruments Inc. based in  St. Louis Park, MINNESOTA (USA)
Raman spectroscopy has proven to be a technological innovation in the pharmaceutical industry by becoming one of the most popular analytical measurement tools. Coupled with chemometrics methods, it has significant advantages of high sensitivity and resolution in pharmaceutical quantitative analysis. It can be used in the characterization of drug molecules to revealing solid, liquid and solution phase samples arising from polymorphism and quantitative applications in formulations. Stop waiting for the laboratory to ...
ByBruker Corporation based in  Billerica, MASSACHUSETTS (USA)
Solutions also available for industrial applications, including non-destructive testing, precision cleaning, sono-processing, and wire ...
ByOnda Corporation based in  Sunnyvale, CALIFORNIA (USA)
Phathom sensors are used in industrial processes like mining and pulp and paper plants for turbidity and suspended solids monitoring. Applications include control of optimum solids content in water product mixes, monitoring and control of wastewater influent and discharge, desludging, and filtration monitoring and ...
ByPhathom based in  Pukekohe, NEW ZEALAND
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Two unbalances (shown here as arrows) can have the same size and angular position and can be the same distance from the centre of gravity. The same condition results for an individual, twice as large, unbalance that acts at the centre of gravity, i.e. in this case in the middle of the rotor. If such a rotor is supported on two knife edges, it would swing until the "heavy point" was facing downwards. This means this unbalance acts even without rotation; it is therefore called "static unbalance". It causes the ...
ByDatatechnic S.A.S. based in  Uxegney, FRANCE
Two unbalances (shown here as arrows) can have the same size, but their angular position is offset by precisely 180° to each other. This unbalance distribution cannot be detected by knife edges as with static unbalance, because the rotor does not take up a unique position at rest. The rotating rotor executes a wobbling movement about its vertical axis (perpendicular to the axis of rotation), because the two unbalances exert a moment. Ergo, this type of unbalance distribution is called couple (moment) ...
ByDatatechnic S.A.S. based in  Uxegney, FRANCE
A real rotor does not only have a single unbalance, theoretically it has an infinite number arbitrarily distributed along the axis of rotation. These can be replaced with two resulting unbalances (shown here as arrows) in two random planes, which generally have different sizes and angular positions. As this unbalance condition can only be fully determined during rotation, it is called dynamic unbalance. It can be broken down into a static unbalance and a couple unbalance, whereby one or the other can be the ...
ByDatatechnic S.A.S. based in  Uxegney, FRANCE
Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Ozone is an allotropic form of oxygen; each molecule contains three atoms of oxygen instead of the usual two. Ozone is a powerful disinfectant and has been used commercially for the treatment of potable water since 1904. It is produced on site in the same way that ozone is formed naturally, by the discharge of electricity during a thunderstorm. A high voltage is passed across a gas stream containing oxygen. This method of ozone generation is called corona discharge. The energy of the high voltage splits an ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Problem: Organic matter (UV254/TOC) in drinking water can react with chlorine to form harmful disinfection by-products (DBPs). Some removal of TOC is achieved through the conventional drinking water treatment processes, while carbon absorption may be used to further enhance the removal of TOC prior to chlorine ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a ...
ByPalas GmbH based in  Karlsruhe, GERMANY