Refine by
Industries served
- Monitoring and Testing
- Manufacturing, Other
- Water and Wastewater
- Air and Climate
- Medical / Health Care
- Agriculture
- Environmental
- Oil, Gas & Refineries
- Energy
- Food and Beverage
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Waste and Recycling
- Mining
- Automobile & Ground Transport
- Metal
- Pulp & Paper
- University / Academia / Research
- Electronics and Computers
- Soil and Groundwater
- Aerospace & Air Transport
- Glassware
- Health and Safety
- Defense
- Plastics & Resins
- Paint
- Commercial
- Communications / Telecom / Datacom
- Travel & Leisure
- Packaging
- Maritime/Shipbuild/Water Transport
- Government
- Forestry & Wood
- Printing
- Real Estate
- Textile
- Retail
- Logistics
- Dry Cleaning
- Banking & Finance / Insurance / Legal
- Publishing / Media / Marketing
Xprt Product Applications In France
2,277 applications found
Create more efficient power ...
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
The aerospace industry uses some of the most advanced technologies in the world in their turbines and engines. Because these turbines and engines are expected to operate and perform at the highest levels, companies in the aerospace industry employ special crews to perform regularly scheduled service and maintenance. But before any work can begin, the crew members must carry out a process called nitrogen flushing to effectively bring the concentration of oxygen in the air down to a safe level. This significantly ...
ByAdvanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA)
Why believe and investin hydrokinetic turbines? Whether designed to harness river currents or marine currents, HydroQuest hydrokinetic turbines deliver an effective energy solution for ...
ByHydroQuest SAS based in Meylan, FRANCE
You might wonder what Operational Modal Analysis, OMA, is and how it differs from the traditional Experimental Modal Analysis (EMA) that has been around for the past few decades. Operational Modal Analysis is also called output-only modal analysis, ambient response analysis, ambient modal analysis, in-operation modal analysis, and natural input modal ...
ByStructural Vibration Solutions A/S based in Aalborg East, DENMARK
Why wait until tomorrow to know today's water quality? How clean is your water? Don't take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra's Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water treatment and distribution systems used in the food and beverage industry, and aids with disinfection ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
The POU/POE industry has strict performance standards. Filter units are tested and approved by ANSI recognized entities such as NSF, UL, and WQA. Most units are now tested to meet California Prop 65 standards for arsenic, antimony, and aluminum. Puragen Activated Carbons is a leader in this market offering high-quality coconut shell activated carbon products in standard, water-washed, and acid-washed options as well as enhanced catalytic carbon ...
ByPuragen Activated Carbons based in Palm Beach Gardens, FLORIDA (USA)
Problem: A challenging aspect of drinking water treatment is often predicting or monitoring the changes that occur with incoming water quality. Seasonality, weather events, agricultural practices or upstream discharges can influence the quality of both ground and surface water over time. With multiple variables impacting source waters, monitoring historical trends may not be sufficient to predict raw water changes or detect uncharacteristic ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Diminished visibility is a major cause of traffic accidents on roadways and cancelled or significantly delayed flights at airports. The source of the deterioration in visibility is the presence of aerosol and cloud (fog) particles in sufficient concentrations to attenuate visible radiation. Mitigating the impact of limited visibility requires better understanding the optical properties of aerosols and fog and improved forecasting of such events in order for drivers to be forewarned and airports to better schedule ...
ByDroplet Measurement Technologies (DMT) based in Longmont, COLORADO (USA)
We are the world’s leading supplier of UV water treatment packages for the oil, gas and petrochemical industry. With over 35 years experience in both onshore and offshore sectors, atg UV has worked closely with the world’s leading oil and gas operators, service companies and design contractors to deliver innovative, robust and reliable water treatment solutions for a range of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)
Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire's disease to reduced operating efficiency and eventually to equipment failure via microbiologically ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)
Microbial Contamination Results in Less than 5 minutes! Microbial growth in metalworking fluids presents a major problem. Storage tanks, recirculation lines, filters, and other equipment can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems. These problems include compromised product quality from microbially influenced corrosion (MIC), equipment and filter plugging, and health risks from bioaerosols. The best solution to these problems is early detection ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)
With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide. atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Catalytic converters in cars are used for the reduction of hazardous emissions, such as carbon monoxide (CO), hydrocarbons (HxCy), and nitrogen oxides (NOx). These harmful substances are converted into neutral carbon dioxide (CO2), water, and nitrogen by catalytic chemical reactions, which are accelerated by three platinum group metals (PGM): platinum, palladium, and rhodium. In the context of recycling, specialized analyzer for catalytic converter, often based on XRF technology, are invaluable for accurately ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Traffic weather is our keyword for every weather monitoring system, that helps to increase safety on roads, railways, in the air and on the ...
ByOtt - Veralto based in Kempten, GERMANY
TenCate Geotube technology is used for agriculture applications to reduce the waste in lagoons and utilize the contained nutrients for crops. This dewatering technology reduces the lagoon size by 50%, reduces labor and energy for land application by 50-70%, stores contained nutrients until needed for crops, provides higher quality flush water and reduces the odor and insect problems normally encountered. Over time, these solids dry in the dewatering containers, making the contained nutrients easier to transport ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS