Refine by
Industries served
- Chemical & Pharmaceuticals
- Food and Beverage
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Medical / Health Care
- Waste and Recycling
- Energy
- Agriculture
- Air and Climate
- Environmental
- Construction & Construction Materials
- Mining
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Soil and Groundwater
- Electronics and Computers
- Aerospace & Air Transport
- Glassware
- Health and Safety
- Commercial
- Plastics & Resins
- Defense
- Communications / Telecom / Datacom
- University / Academia / Research
- Packaging
- Maritime/Shipbuild/Water Transport
- Travel & Leisure
- Paint
- Printing
- Banking & Finance / Insurance / Legal
- Forestry & Wood
- Textile
- Government
- Dry Cleaning
- Logistics
- Retail
- Household Appliances
Xprt Product Applications In Germany
3,851 applications found
Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. ...
ByControl Instruments Corporation (CIC) based in  Fairfield, NEW JERSEY (USA)
NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the ...
ByUnisearch Associates Inc. based in  Concord, ONTARIO (CANADA)
Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified ...
ByUnisearch Associates Inc. based in  Concord, ONTARIO (CANADA)
Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels. Common air monitoring applications include: Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination. Asbestos sampling and analysis ...
ByCytiva based in  Marlborough, MASSACHUSETTS (USA)
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Power plants are industrial facilities used to generate electric power with the help of one or more generators which convert different energy sources into electric power. Power plants need to monitor emissions continuously according to local emission regulations. Read about our solutions for the power ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
This method uses a suspension of ground plant material to directly measure the potassium concentration. It eliminates the usual steps of ashing and subsequent dissolution of the resulting ash. The method was compared to alternative methods such as chemical analysis and spectrophotometric methods. Collaborative studies using a range of samples gave a mean of 1.74% potassium by this extraction technique as compared to 1.75% by alternative methods. The standard deviation of an analysis in the two different sample ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
These methods are adapted from methods for the determination of sodium and potassium in fatty-acid methyl ester samples. The sample is diluted with an organic solvent (xylene, cyclohexane or petroleum ether) plus a stabiliser. The calibration standards which have a similar matrix to the prepared sample solutions, are prepared from sodium and potassium organometallic salts which are dissolved in a solution of xylene with a stabiliser. These European Standards specify a method for the determination of potassium of ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Wine is of particular interest nutritionally because it is typically low in sodium and relatively high in potassium. Sodium is the predominant cation in breakfast cereals, at levels reaching 8mg/g. Potassium and calcium also vary, particularly in wheat-based products and those enriched with milk products or calcium ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
This method allows the analyte to be pre-concentrated in the final solution, decreases the volume of strong acid used in the dissolution stage and does not use organic ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
The Oil & Gas industry is composed of three major components: upstream, midstream and downstream. The upstream industry finds and produces crude oil and natural gas. The midstream industry processes, stores, markets and transports commodities such as crude oil, natural gas and natural gas liquids. The downstream industry includes the oil refineries, petrochemical plants, petroleum product distributors and natural gas distribution companies.All of these operations contain many processes that require monitoring ...
ByControl Instruments Corporation (CIC) based in  Fairfield, NEW JERSEY (USA)
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
ByDekati Ltd. based in  Kangasala, FINLAND
EyeCSite 2.0 is the industry-leading quantification software, offering a wide range of functionalities that detects, alerts and quantifies emissions in a very simplified and user-friendly interface, without the need for a close contact analyzer. ...
ByOPGAL based in  Karmiel, ISRAEL
One of the main sources of air pollution is traffic. To estimate the traffic contribution to air pollution the emissions are calculated from the vehicle fleet composition and vehicle emission factors (EF). Since the emission factors depend on vehicle type (cars, heavy and light duty), engine maintenance, driving environment (city, highway, regional roads) and weather, the emmision factors must be measured for in-use vehicles in actual traffic ...
ByAerosol Magee Scientific Company based in  Portland, CALIFORNIA (USA)
The automotive industry is a major air pollution contributor and thus one of the most regulated industries in the world. Several gas monitoring techniques are widely used in the automotive industry for measuring vehicle emissions. Typical applications include live on-board exhaust monitoring (CO, CO2, N2O, NOx, formaldehyde, acetaldehyde, oxygen and moisture), analysis of raw and dilute exhaust gas from the engine and tailpipe with gas-bags (CO2, N2O, NOx, CH4, EtOH, THC, H2S, SO2, NH3, formaldehyde and ...
ByGasera Ltd based in  Turku, FINLAND