Refine by
Industries served
- Chemical & Pharmaceuticals
- Food and Beverage
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Medical / Health Care
- Waste and Recycling
- Energy
- Agriculture
- Air and Climate
- Construction & Construction Materials
- Environmental
- Mining
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Soil and Groundwater
- Electronics and Computers
- Glassware
- Aerospace & Air Transport
- Health and Safety
- Plastics & Resins
- Defense
- Communications / Telecom / Datacom
- University / Academia / Research
- Commercial
- Maritime/Shipbuild/Water Transport
- Packaging
- Travel & Leisure
- Paint
- Printing
- Banking & Finance / Insurance / Legal
- Forestry & Wood
- Textile
- Government
- Dry Cleaning
- Logistics
- Retail
Xprt Product Applications In Germany
3,862 applications found
Particle size is a geometric characteristic that is usually assigned to material objects with sizes ranging from nanometers to millimeters. There is a wide variety of real systems that contain particles within this size range. These systems are generally polydisperse, meaning that the particles in a particular sample vary in size. Therefore, in order to adequately characterize such systems, it is not sufficient to simply determine a single particle size. We must instead determine the system’s particle size ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
There are two papers published on subject of applicability of ultrasound for characterizing CMP slurries, see below. There are also 2 newsletters, # 1 and # 13 on the same subject. Acoustics provides accurate particle size that agrees well with independent data. It can monitor presence of 1% large particles on the background of small nano-particles. Electroacoustics yields very precise value of zeta potential. These measurements can be done with no dilution, which opens possibility for continuous on-line control ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
Acoustics makes possible measurement of Particle size of the emulsion and microemulsion droplets with no dilution, which is critical for these systems. Papers presented below indicate very good agreement between this method and independent data. Combination of Acoustics and Electroacoustics could reveal peculiar mechanisms controlling emulsion stability, such as ion exchange in water-in-oil ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Particle Measuring Systems has put together a team of industry experts and solutions to help you better understand and meet 21 CFR Part 11. Start here by watching an on-demand webinar, reading a paper, viewing our particle counter and data management solutions, or submitting a question to our ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
In cement plants, in the process of preparing raw materials such as limestone, gypsum, clay, trass, iron environment to the process, in crushers, conveyor belt transfer points, stocking raw materials with stacker, triper car, and suppressing the dust released by wind during clinker bucket belt shedding and stock areas, With dual fluid water pulverization and fan sprayed dust control systems, dust is reduced to below the limit values specified in the “Industrial Air Pollution Control” regulation of the ...
ByEnvex based in Kahramankazan, TURKEY
In crushing and screening plants, single, double fluidized water pulverization and fan sprayed dust control systems are used in The pressing of dust released in truck unloading bunkers, primary jaw. impact crusher, secondary cone, vertical shaft, impact crusher and tertiary powder machines, sieves and conveyor belt transfer points, dust is ensured to be reduced below the limit values specified in the "Control of Industrial Air Pollution* regulation of the Ministry of Environment and Urbanization. These values are ...
ByEnvex based in Kahramankazan, TURKEY
Coal feeding bunkers, crushers, conveyor belt transfer points, raw material stacker & reclaimer (stocker & collector), triper car, bunker loading & unloading and stockpiles are used in thermal power plants with single, double fluid water pulverization and With fan spray dust control systems, dust is reduced to below the limit values specified in the “Control of Industrial Air Pollution” regulation of the Ministry of Environment and Urbanization. These values are also compatible with the ...
ByEnvex based in Kahramankazan, TURKEY
Environmental protection of dust with water pulverization fan control dust control systems in loading and unloading with bunker, loading and unloading with cranes bucket crane in port bulk material transportation operations, loading with conveyor belt and ship loading operations, and suppressing the dust released by wind. and lower than the limit values specified in the “Control of Industrial Air Pollution” regulation of the Ministry of Urban Planning. These values are also compatible with ...
ByEnvex based in Kahramankazan, TURKEY
The raw material stacked in the stock areas is reduced to the limit values specified in the “Industrial Air Pollution Control” regulation of the Ministry of Environment and Urbanization with water pulverization fan spraying dust control systems during loading and unloading and suppression of dust released by wind. These values are also compatible with international PM 10 measurement limit values, which are sub-10 micron particle ...
ByEnvex based in Kahramankazan, TURKEY
The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
From a regulatory standpoint, the waste incineration industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from evaluating their air pollution control ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Effective and trustworthy thermal waste management is the champions league of combustion design. The LAWI EtaComb Incineration Systems are just that; they are champions in an automatically controlled conversion of solid waste fuels into thermal energy for various applications and with unprecedented low emissions. In a quasi-gasification process waste fuels such as RDF, municipal solid waste (MSW), SRF, dewatered sludges, wood wastes, landfills wastes and other industrial wastes and residues are efficiently ...
ByLAWI Engineering GmbH based in Kiel, GERMANY
Solid waste fuel incineration can be applied in wood industries to generate energy from the wood waste that is produced during the wood processing, furniture manufacturing, and other activities. Wood waste includes wood chips, sawdust, shavings, bark, and other residues that are not suitable for material reuse or recycling. Solid waste fuel incineration can reduce the amount of wood waste that needs to be landfilled or open-burned, and also provide a source of heat and electricity for the wood industries or other ...
ByLAWI Engineering GmbH based in Kiel, GERMANY
The 2010 Eyjafjallajökull eruption caused massive disruption to air traffic. Many other volcanic events are continuously causing severe disturbance to world air traffic such as cancellation of flights and closing of airspaces and airports, in Latin America, Asia, North America, Australia among ...
ByRaymetrics S.A. based in Athens, GREECE
Different types of power lines serve to transport electricity from the generation site to the end-users. Most commonly, and for efficiency reasons, the electricity is transported over long distances as alternating current at 50 or 60 Hz, carried overhead or underground using high voltage power lines or cables. Over very long distances or underwater, transmission occurs sometimes with high voltage direct current (HVDC). Power lines transmitting alternating current (AC) are surrounded by low frequency electric and ...
ByInternational Commission on Non-Ionizing Radiation Protection (ICNIRP) based in Oberschleissheim, GERMANY
Mobile phones operate in the radiofrequency range of the electromagnetic spectrum, from several hundred MHz to several GHz, to enable wireless phone calls and data transfer, including communication through the internet. The exact frequency band used differs between technologies (GSM, UMTS, 4G, 5G, etc.) and between countries. ...
ByInternational Commission on Non-Ionizing Radiation Protection (ICNIRP) based in Oberschleissheim, GERMANY
Wi-Fi is the term now commonly used to designate a Wireless Local Area Network (WLAN), which is used to exchange data between electronic devices and to wirelessly connect, for example, personal computers, tablets or smart-phones to each other and to the internet. The main wavebands used by Wi-Fi networks are in the high frequency (HF) range of the electromagnetic spectrum (several GHz). Wi-Fi network routers (or Wireless Access Points – WAPs) are often set up at homes and in public buildings such as airports ...
ByInternational Commission on Non-Ionizing Radiation Protection (ICNIRP) based in Oberschleissheim, GERMANY
Digital Enhanced Cordless Telecommunication (DECT) is primarily used for creating cordless phone systems. DECT phones are commonly used in the home and in the work environment. In recent years this technology has also been used for baby monitors and in remote controls for industrial applications. The DECT operate at frequencies of several MHz. Exposure from DECT devices can be considered as far field exposure in relation to the local base station and as near field exposure in relation to the portable phone or ...
ByInternational Commission on Non-Ionizing Radiation Protection (ICNIRP) based in Oberschleissheim, GERMANY
The highest standards of accuracy and reliability are required in laboratories and medical devices. STS products are perfectly suited to this purpose – an example is their use in pressure and measurements of dialysis ...
BySTS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND