Show results for
Refine by
Ftir Product Applications In Germany
51 applications found
FTIR may be used to study surface-adsorbed gas species on solid catalysts. ...
BySpecac based in Orpington, UNITED KINGDOM
Premium
Lumex Instruments provides user-friendly analytical solution for EN 14078:2014 implementation using FTIR spectrometer InfraLUM FT-08 and powerful SpectraLUM software package. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Monitoring chemical processes during manufacturing can be achieved with a mixture of in-line and at-line techniques, among them NIR and FTIR spectroscopy. Specac has a proven track record of supplying robust, rugged, reliable flow cells for in-line measurement. ...
BySpecac based in Orpington, UNITED KINGDOM
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Polymers and plastics can be conveniently studied using FTIR. Different ways of preparing and analysing the samples exist depending on the analytical need. Specac's range of FTIR accessories can easily cater to a wide range of these ...
BySpecac based in Orpington, UNITED KINGDOM
In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
AN0016 – Automated multi-species flux measurements with eosAC and Gasmet DX4015/4040 Portable FTIR Gas Analyzers ...
ByEosense Inc based in Dartmouth, NOVA SCOTIA (CANADA)
The Gasmet™ GT5000 Terra portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Our ChemLogic 96 Continuous and DOD64 FTIR Sequential gas analyzers are staples in this industry with over 1,000 machines operating every day worldwide. ...
ByDOD Technologies Inc based in Cary, ILLINOIS (USA)
As phosgene is very poisonous, even small gas pockets in serviced equipment may be dangerous to maintenance personnel. Gasmet™ FTIR Gas Analyzers are ideal tools to monitor point sources of phosgene. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Type approval regulations like ECE-R100 and FTIR technology in GT5000 Terra align with safety mandates. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards exist to come up to this ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in Furulund, SWEDEN