- Home
- Applications
- germany
- gas sampling
Refine by
Gas Sampling Product Applications In Germany
24 applications found
Premium
Check our LNI Swissgas range of gas generators for Sample Evaporation ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Premium
The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production. ...
ByECO Physics AG based in Duernten, SWITZERLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is constructed of glass and stainless steel. ...
BySigma-Aldrich based in Bellefonte, PENNSYLVANIA (USA)
Premium
The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its ...
ByMetrohm AG based in Herisau, SWITZERLAND
The TunnelTech 400 series are extractive gaseous pollutant and visibility monitors and extract a gas and dust sample from the tunnel bore and carry to a remote analyser. ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
QCAL introduces CO2Control for incubators and test chambers. These gas dosing units can be adapted to nearly every incubator or test chamber. ...
ByQCAL Messtechnik GmbH based in Munchen, GERMANY
Premium
With decades of industrial experience, our systems are designed and developed as a complete turnkey solution. From sample extraction, through analysis, data acquisition and report management, each system is configured to comply with the normative demands and technical constraints of our clients, specific to their ...
ByENVEA based in Poissy, FRANCE
In industrial processes involving gases, in the energy industry, process engineering, production or chemistry, for example, whose goal is to optimize, to provide quality assurance or to avert danger, using online gas analysis allows optimal process ...
ByMesskonzept GmbH based in Frankfurt am Main, GERMANY
Premium
Tekran Instruments are versatile. We offer a number of tools to expand the capability of our instrumentation. Unlike any other mercury instrument manufacturer, Tekran offers multiple options for automated mercury speciation measurements in air, emission sources and environmental samples. Additionally, our software provides full access to all instrument features allowing complete method customization. Below are examples of expanded measurement applications that utilize the unique adaptability of Tekran ...
ByTekran Instruments Corporation based in Toronto, ONTARIO (CANADA)
Premium
Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
One of the main hazards in a power station is a fire in a coal rich environment; the latter can often become an explosion with consequential damage to human life and capital ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
AN0016 – Automated multi-species flux measurements with eosAC and Gasmet DX4015/4040 Portable FTIR Gas Analyzers ...
ByEosense Inc based in Dartmouth, NOVA SCOTIA (CANADA)
USP37 Medical Gas requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. Following the appropriate United States Pharmacopeia standards, in this case specifically USP37, requires an analyzer which uses a paramagnetic based technology. The Systech Illinois Paramagnetic Oxgyen Analyzer PM700 is perfectly suited for this medical gas analysis ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM
One of the largest users of gas detection safety equipment are Chemical Storage and Chemical Manufacturing Plants. Toxic, asphyxiant, and flammable gases are commonly used in manufacturing and are also by products of the manufacturing process. Storage of these gases is done on site in large metal cylinders. The transferring of gas into other containers or to other parts of the plant can release these gases into the air. Portable and Fixed gas detections systems work together to provide a safety net of gas ...
ByDOD Technologies Inc based in Cary, ILLINOIS (USA)
HORIBA’s highly accurate Nitrous Oxide (N2O) analyzers represented in various types from stationary to portable, contribute to the environment protection and GHG emissions mitigation by quantification of N2O emission from wastewater treatment ...
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
Gasmet manufactures portable and powerful gas analyzers for greenhouse gas flux measurements. All key gas compounds can be measured in seconds: N2O, CH4, CO2, H2O, CO and ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND