- Home
- Applications
- germany
- spectroscopy
Refine by
Industries served
Spectroscopy Product Applications In Germany
78 applications found
Premium
BUCHI offers classical reference methods and near infrared spectroscopy for food analysis, but also visualization of production processes using spray drying and ...
ByBUCHI based in Flawil, SWITZERLAND
Premium
Packaging can be opened to perform a verification test using analytical techniques such as assays or infrared spectroscopy. ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
Near infrared spectroscopy has been widely used in the chemicals and polymers industries for years. ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
Sugarcane was discovered in India between the 6th and 4th centuries BC by Persians. Today, sugarcane is the world's largest crop by production quantity. It is cultivated in more than 90 countries with Brazil, India and China as the top three producers. For centuries, sugarcane has been cultivated to produce sugar. Then its cultivation was expanded to produce liquors, and with today's technology, use of sugarcane is expanding into an extraordinarily diverse range of value-added products such as ethanol, ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
As biodiesel is formed through a simple transesterification, it is easily monitored and characterized by NMR Spectroscopy. This analytical technique allows easy, non-destructive evaluation of many of the components regulated in biodiesel standardization (e.g., water, alcohol, phosphorous, and glycerol content). Subsequently, the NMReady could be easily incorporated into characterization to improve workflow. NMR Spectroscopy can be used to quantify the percentage of biodiesel in ...
ByNanalysis Corp. based in Calgary, ALBERTA (CANADA)
Premium
There is a long history of spice adulteration, which dates back thousands of years. The main incentive behind the adulteration is economic: either reduction of cost or increase in perceived value. Most adulterants are harmless, such as adulteration with products from non-authentic geographic origins. However, some adulterants are deadly. Paprika, as an example, can be adulterated with tomato skins and brick dust, but it can also be adulterated with lead oxide and carcinogenic chemical dyes, such as Sudan I dye. ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Monitoring chemical processes during manufacturing can be achieved with a mixture of in-line and at-line techniques, among them NIR and FTIR spectroscopy. Specac has a proven track record of supplying robust, rugged, reliable flow cells for in-line measurement. ...
BySpecac based in Orpington, UNITED KINGDOM
Acoustics can characterize particle size and zeta potential in ceramic slurries with no dilution. There are several papers published on this ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
Premium
Lumex Instruments proposes a rapid and precise method for direct mercury determination using RA-915 series analyzers based on atomic absorption spectroscopy with Zeeman correction of the background absorption (ZAAS). ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
The Raman spectroscopy technique has been developed by scientists in the laboratory for remotely detecting specific gases in the atmosphere. ...
ByRaymetrics S.A. based in Athens, GREECE
Premium
Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
There are many useful NMR applications in biotechnology and pharmaceutical industries. 1H and multinuclear NMR Spectroscopy (e.g., 13C, 19F, 31P) are essential tools for structural elucidation and drug discovery. ...
ByNanalysis Corp. based in Calgary, ALBERTA (CANADA)
There are several developed applications with results published in the papers presented ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
Acoustic spectroscopy is a very simple method for sizing of nanoparticles. There are many examples published in the papers that are listed below. ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
Premium
Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
OPO-based photoacoustic spectroscopy (PAS) provides ultimately fast and sensitive trace gas analysis The photoacoustic infrared spectroscopy (PAS) is a very promising technology for trace gas detection and analysis in environmental or atmospheric monitoring, industrial process control or medical diagnostics. ...
ByHÜBNER Photonics GmbH a Division of HÜBNER GmbH & Co. KG based in Kassel, GERMANY
Premium
Effective, safe and sustainable processes play a key role in the chemical industry. To meet these needs, BUCHI offers a variety of reliable and modern solutions for R&D, scale-up, production and quality ...
ByBUCHI based in Flawil, SWITZERLAND
Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. ...
ByAdvanced Energy Industries, Inc. based in Denver, COLORADO (USA)
Premium
Synthetic polymers and plastics are a mainstay of modern life. Because of their versatility and physical properties, plastics and polymers have conquered nearly every aspect of human activity: airplanes and cars, packaging of all kinds, medical devices and products, electronics, and countless more – without high-quality and high-tech plastics most products we use today in everyday life would look very different. Polymer production is a demanding process in which high-purity raw materials undergo complex ...
ByMetrohm AG based in Herisau, SWITZERLAND
Premium
INTRODUCTION Rubber is a material that is widely used in all kinds of human activity. Rubber properties are modified by addition of chemical substances and ingredients causing physical and chemical modifications. The ingredients modify rubber hardness, durability and impact st rength; increase its resistance to wearing, oils, oxygen, solvents, heat, and cracking, which makes rubber more suitable for the use in various application ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)