Refine by
Industries served
- Chemical & Pharmaceuticals
- Food and Beverage
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Medical / Health Care
- Waste and Recycling
- Energy
- Agriculture
- Air and Climate
- Environmental
- Construction & Construction Materials
- Mining
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Soil and Groundwater
- Electronics and Computers
- Aerospace & Air Transport
- Glassware
- Health and Safety
- Plastics & Resins
- Commercial
- Defense
- Communications / Telecom / Datacom
- University / Academia / Research
- Maritime/Shipbuild/Water Transport
- Packaging
- Travel & Leisure
- Paint
- Printing
- Banking & Finance / Insurance / Legal
- Forestry & Wood
- Textile
- Government
- Dry Cleaning
- Logistics
- Retail
- Household Appliances
Xprt Product Applications In Germany
3,851 applications found
In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification. Further applications are: Diluting and conveying acids and lye during the process of regenerating ion ...
ByKörting Hannover AG based in Hannover, GERMANY
In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers. ...
Byatech innovations gmbh based in Gladbeck, GERMANY
NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the ...
ByUnisearch Associates Inc. based in Concord, ONTARIO (CANADA)
Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified ...
ByUnisearch Associates Inc. based in Concord, ONTARIO (CANADA)
Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in Berlin, GERMANY
ByGardner Denver Thomas GmbH based in Fürstenfeldbruck, GERMANY
Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels. Common air monitoring applications include: Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination. Asbestos sampling and analysis ...
ByCytiva based in Marlborough, MASSACHUSETTS (USA)
The dewatering phases in municipal processes are basically of biological sludge originated from purification processes. Bilfinger Water Technologies has realized many complete installations of sludge purification regarding the processes of water purification, purification of waste waters and SUW (solid urban waste) ...
ByAqseptence Group GmbH based in Aarbergen, GERMANY
TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries. In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%. The dewatering containers can be custom-sized to the application, placed in available space between other ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in Steinen, GERMANY
Flexible, turnkey solutions for container cleaning. Cleaning industrial containers such as canisters, vats or IBCs produce large volumes of effluent. The type of impurities in this effluent depends heavily on what has been transported in the containers. That’s why effluent treatment requires a flexible system able to cope with all conceivable contaminants. Reconditioners are increasingly using modern vacuum distillation systems to do this. They work fully automatically, guarantee a high level of process ...
ByH2O GmbH based in Steinen, GERMANY
Crystal-clear distillate. For optimum painting pre-treatment results. Are using vacuum distillation systems to recondition rinse water during paint pre-treatment. The advantage of this type of system lies in the quality of the reconditioned rinse ...
ByH2O GmbH based in Steinen, GERMANY
Wastewater and process water treatment in the metal industry. Industrial waste water or circuit water in the metal industry can be broken down into many comprehensive, subject-specific areas. AWAS has developed various methods of treatment technology for the metal industry in the last 30 years. Generally we accept any environmental challenge and like to respond to individual ...
ByAWAS International GmbH based in Wilnsdorf, GERMANY
After supreme purity law of water: In the food industry water of the highest quality is required. For filling of cans, bottles and other packaging only sterile water may be in use. The same applies to machinery and production lines which must be cleaned regularly at the highest level. For these waters AWAS offers combined UVA and UVC ...
ByAWAS International GmbH based in Wilnsdorf, GERMANY
Air-powered submersible pumps, equipment for free product recovery and groundwater remediation, air strippers, groundwater sampling. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data ...
ByQED Environmental Systems, Inc based in Dexter, MICHIGAN (USA)
ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)