Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Environmental
- Energy
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Pulp & Paper
- Mining
- Glassware
- Metal
- Electronics and Computers
- Waste and Recycling
- Construction & Construction Materials
- Automobile & Ground Transport
- Soil and Groundwater
- University / Academia / Research
- Aerospace & Air Transport
- Medical / Health Care
- Paint
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Commercial
- Communications / Telecom / Datacom
- Textile
- Health and Safety
- Defense
- Government
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Travel & Leisure
Xprt Product Applications In Greece
1,141 applications found
Renewable energy from biomass: Solid biomass is intended to make a major contribution to the transition from fossil fuels to renewable energies. However, to reach the ambitious goals for heating and energy generation from woody biomass, it will need to be made available in large amounts. In keeping with our slogan, "Technology for a better environment", we have taken up the challenge of finding ways to do ...
ByKomptech GmbH based in Frohnleiten, AUSTRIA
Statiflo has the most extensive range of Motionless Mixers, for pipes and open channels, suitable for pre-treatment and post-treatment applications: Inlet blending, Disinfection and pH control, Coagulation and flocculation (floc mixer), Remineralisation, Brine dilution before sea outfalls. Statiflo’s unique customised approach to static mixer design provides the most effective mixing solutions for both new treatment plants and retrofits to existing ...
ByStatiflo International Ltd. based in Macclesfield, UNITED KINGDOM
Processing recyclable and disposable materials out of C&D waste. C&D waste can include almost anything from wood to stones. The TANA Shark can easily handle waste wood, plastics, aluminum profiles, insulation materials and reasonable amounts of ...
ByTana Oy based in Jyvaskyla, FINLAND
Commercial and industrial waste typically contains different kinds of packaging materials, like hard and soft plastics, cardboard, paper, wires, paper rolls, containers, aluminium, gypsum or any reject from production line of a manufacturing process, sand paper for instance. In other words, a wide variety of different kinds of materials with various requirement to the machines it is treated with. TANA shredders are widely used in treatment of this variety of ...
ByTana Oy based in Jyvaskyla, FINLAND
Mattresses are usually considered a nightmare in the waste management industry. Mattresses cannot be easily compacted in the landfill, and springs are difficult for most shredders. For low-revving and high-torque TANA Shark shredders, however, mattresses are an easy ...
ByTana Oy based in Jyvaskyla, FINLAND
Ragger wire or pulper tail is the residue of steel wires and plastic that remains after a pulping process. A mass of recyclable paper is being processed with the help of water. The remaining mass, consisting of wires and plastics of the bales, is called ragger wire. It is often landfilled because no method or machinery can separate the material cost efficiently. But when you can the recovered steel easily justifies the purchase of a TANA shredder. The rest can be landfilled or used as alternative ...
ByTana Oy based in Jyvaskyla, FINLAND
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. Air quality monitoring efforts are usually driven by governmental regulation, but may also be motivated by a neighborhood concern or scientific interest. These measurements are performed by researchers in industries or institutions, but they may also be performed by local advocacy groups. When combined with other information (such as weather data, ...
ByTSI Incorporated based in Shoreview, MINNESOTA (USA)
Industry Challenge: The wide range of production processes which have to comply to rigid hygienic guidelines characterizes these industries. Water consumption is high and the wastewaters can be very complex. They often contain all kinds of proteins, carbohydrates, fats and oils. These organic substances have a high chemical oxygen demand (COD). Evaporator technology produces a purified wastewater which can be re-introduced into the production cycle for efficient re-use and a sustainable resource management. As ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Dry mixed recycling (also known as “co-mingled” waste) can be found within many municipalities and residential areas worldwide. It refers to a system where paper, card, plastics, metals and other recyclable products are collectively separated from the municipal waste stream at source. Ideally glass should not be included but can be accommodated if required. This mixture of recyclables is then separated at a materials recovery facility for onwards closed loop ...
ByKiverco Ltd. based in Dungannon, NORTHERN IRELAND
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in Kyiv, UKRAINE
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
ByNoardling B.V. based in Sneek, NETHERLANDS
UV disinfection is now a standard final treatment stage in most wastewater treatment plants worldwide. Our UV systems are widely favoured due to their environmentally friendly, chemical-free and ability to provide high-log reductions of all known micro-organisms, including chlorine resistant strains, such as Cryptosporidium. As growing environmental awareness and stricter regulations drive effluent discharge standards and water re-use initiatives to achieve greater performance, UV water treatment is fast becoming ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
ByQED Environmental Systems based in Dexter, MICHIGAN (USA)
The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in Wiesbaden, GERMANY
Membrane technology has made major progress in recent years and is nowadays the method of choice for many processes in the chemical industry, wherever substances are to be separated efficiently and gently. A prime example of this is dia-filtration, in which solutes and particles with higher molecular weights are retained while solutes with lower molecular weights are "washed" out of the process fluid. ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in Wiesbaden, GERMANY
The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste ...
ByWeda Robotics based in Södertälje, SWEDEN
Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental ...
BymicroLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM