Show results for
Refine by
Ftir Product Applications In Greece
41 applications found
The process operations emit multiple Acrylate species, all at low concentrations, but only Ethyl Acrylate being reportable to the EA under the terms of the IPC permit. A 204M FTIR analyser was deployed and a chemometric model was built specifically to target Acrylates, with the purpose of separating and accurately quantify the target Ethyl Acrylate species. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our FTIR analyser have been proven in formaldehyde emission measurements over many ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Current Total VOC Measurements The most common, and current standard, method for measuring Total Volatile Organic Compounds (VOC) is the use of a Flamed Ionisation Detector (FID). This gives a representative value of the total carbon content of a gas stream, as the FID cannot tell which specific organic compounds are ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
What are siloxanes? The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas generated is a form of renewable energy. Organosilicon compounds are often present in products such as shampoo and cosmetics, as well as industrial products and lubricants, and they move into land-fill. These volatile compounds find their way into land-fill or digester gases as ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Introduction Volatile organic compounds (VOCs) are a group of organic compounds which have a low vapour pressure at room temperature, meaning that they will readily evaporate into the surrounding air. The term VOC refers to many different classes of organic compounds such as alkanes, alkenes, alcohols, aldehydes, aromatics and many ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
ByOPSIS AB based in Furulund, SWEDEN
The quality of compressed breathing gases for aircraft, diving and marine has very tight limits imposed by bodies such as NATO and national bodies such as MOD. The test requirements are for contaminants such as CO, CO2, Total VOC, CFCs and halogenated hydrocarbons, as well as H2O and O2 content. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Process monitoring and monitoring of emissions from aluminium smelters can be a challenge due to high concentrations of for example hydrogen fluoride (HF) and dust. The use of sampling systems in such environments requires a lot of maintenance and is therefore costly. Such systems can also be unreliable. OPSIS offers better ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS offers monitoring systems for continuous emissions monitoring and process control at power plants. The systems meet and exceed high demands on availability, speed, versatility, and low operating ...
ByOPSIS AB based in Furulund, SWEDEN