Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Environmental
- Energy
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Pulp & Paper
- Mining
- Glassware
- Metal
- Construction & Construction Materials
- Electronics and Computers
- Waste and Recycling
- Automobile & Ground Transport
- Soil and Groundwater
- University / Academia / Research
- Aerospace & Air Transport
- Medical / Health Care
- Paint
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Communications / Telecom / Datacom
- Textile
- Health and Safety
- Commercial
- Defense
- Government
- Banking & Finance / Insurance / Legal
- Travel & Leisure
- Retail
- Logistics
Xprt Product Applications In Greece
1,141 applications found
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
ByEcomesure based in  Saclay, FRANCE
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in  Saclay, FRANCE
Whether you work in heavy industry, transport and logistics or construction, ground vibration monitoring is a key activity. To control the environmental impact of ground-bourne vibration, such as nuisance vibration or building damage, it’s vital to ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
Groundwater hydrology is an interpretive science: we can’t observe the aquifers directly so we must interpolate and extrapolate our understanding from water-level measurements taken from observation wells. Stevens has expertise for measuring both water quantity and water ...
ByStevens Water Monitoring Systems, Inc. based in  Portland, OREGON (USA)
Diminished visibility is a major cause of traffic accidents on roadways and cancelled or significantly delayed flights at airports. The source of the deterioration in visibility is the presence of aerosol and cloud (fog) particles in sufficient concentrations to attenuate visible radiation. Mitigating the impact of limited visibility requires better understanding the optical properties of aerosols and fog and improved forecasting of such events in order for drivers to be forewarned and airports to better schedule ...
ByDroplet Measurement Technologies (DMT) based in  Longmont, COLORADO (USA)
We are the world’s leading supplier of UV water treatment packages for the oil, gas and petrochemical industry. With over 35 years experience in both onshore and offshore sectors, atg UV has worked closely with the world’s leading oil and gas operators, service companies and design contractors to deliver innovative, robust and reliable water treatment solutions for a range of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide. atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Excess amounts of humid air entering a retail space can create an uncomfortable store ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Commercial and public buildings must protect the health, safety and general well-being of those occupying the ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for occupational health and industrial hygiene include both portable and stationary PM measurement systems as well as solutions for overall industrial hygiene measurements according to ISO16000-34 and ISO16000-37. Our aerosol measurement solutions have been successfully used in various health and safety monitoring and research areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of ...
ByDekati Ltd. based in  Kangasala, FINLAND
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in  Kangasala, FINLAND
The 2010 Eyjafjallajökull eruption caused massive disruption to air traffic. Many other volcanic events are continuously causing severe disturbance to world air traffic such as cancellation of flights and closing of airspaces and airports, in Latin America, Asia, North America, Australia among ...
ByRaymetrics S.A. based in  Athens, GREECE
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Incinerator Bottom Ash (IBA) is the material discharged through the grate of a Waste to Energy facility after incineration of municipal solid waste (MSW). Depending on the waste being incinerated IBA can contain varying quantities of glass, ceramics, brick, concrete and metals in addition to clinker and ...
ByKiverco Ltd. based in  Dungannon, NORTHERN IRELAND