Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Environmental
- Energy
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Pulp & Paper
- Mining
- Glassware
- Metal
- Construction & Construction Materials
- Electronics and Computers
- Waste and Recycling
- Automobile & Ground Transport
- Soil and Groundwater
- University / Academia / Research
- Aerospace & Air Transport
- Medical / Health Care
- Paint
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Communications / Telecom / Datacom
- Textile
- Health and Safety
- Commercial
- Defense
- Government
- Banking & Finance / Insurance / Legal
- Travel & Leisure
- Retail
- Logistics
Xprt Product Applications In Greece
1,141 applications found
Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
The 2010 Eyjafjallajökull eruption caused massive disruption to air traffic. Many other volcanic events are continuously causing severe disturbance to world air traffic such as cancellation of flights and closing of airspaces and airports, in Latin America, Asia, North America, Australia among ...
ByRaymetrics S.A. based in  Athens, GREECE
Excess amounts of humid air entering a retail space can create an uncomfortable store ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Commercial and public buildings must protect the health, safety and general well-being of those occupying the ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Dekati measurement solutions for occupational health and industrial hygiene include both portable and stationary PM measurement systems as well as solutions for overall industrial hygiene measurements according to ISO16000-34 and ISO16000-37. Our aerosol measurement solutions have been successfully used in various health and safety monitoring and research areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of ...
ByDekati Ltd. based in  Kangasala, FINLAND
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in  Kangasala, FINLAND
As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Numerous studies have shown that non-exhaust emissions can equal or even exceed those from the exhaust, and we have a measurement system for both types of emissions. Also, the discussions around Euro 7 emission standards has increased the interest and need for non-exhaust ...
ByDekati Ltd. based in  Kangasala, FINLAND
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
ByPalas GmbH based in  Karlsruhe, GERMANY
For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and ...
ByPalas GmbH based in  Karlsruhe, GERMANY
In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Fine dust is generated by industrial exhaust gases but in particular due to traffic. Environmental pollution is therefore caused particularly by exhaust gases of diesel-engined vehicles (diesel soot) but on the other hand also by abrasion of street, tyres and brakes and its ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
ByDekati Ltd. based in  Kangasala, FINLAND
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
ByDekati Ltd. based in  Kangasala, FINLAND
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. Air quality monitoring efforts are usually driven by governmental regulation, but may also be motivated by a neighborhood concern or scientific interest. These measurements are performed by researchers in industries or institutions, but they may also be performed by local advocacy groups. When combined with other information (such as weather data, ...
ByTSI Incorporated based in  Shoreview, MINNESOTA (USA)
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
ByEcomesure based in  Saclay, FRANCE
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in  Saclay, FRANCE