Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Environmental
- Energy
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Chemical & Pharmaceuticals
- Pulp & Paper
- Mining
- Glassware
- Metal
- Construction & Construction Materials
- Electronics and Computers
- Waste and Recycling
- Automobile & Ground Transport
- Soil and Groundwater
- University / Academia / Research
- Aerospace & Air Transport
- Medical / Health Care
- Paint
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Communications / Telecom / Datacom
- Textile
- Health and Safety
- Commercial
- Defense
- Government
- Banking & Finance / Insurance / Legal
- Travel & Leisure
- Retail
- Logistics
Xprt Product Applications In Greece
1,141 applications found
Fine dust is generated by industrial exhaust gases but in particular due to traffic. Environmental pollution is therefore caused particularly by exhaust gases of diesel-engined vehicles (diesel soot) but on the other hand also by abrasion of street, tyres and brakes and its ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and ...
ByPalas GmbH based in  Karlsruhe, GERMANY
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
ByDekati Ltd. based in  Kangasala, FINLAND
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in  Saclay, FRANCE
Incinerator Bottom Ash (IBA) is the material discharged through the grate of a Waste to Energy facility after incineration of municipal solid waste (MSW). Depending on the waste being incinerated IBA can contain varying quantities of glass, ceramics, brick, concrete and metals in addition to clinker and ...
ByKiverco Ltd. based in  Dungannon, NORTHERN IRELAND
The 2010 Eyjafjallajökull eruption caused massive disruption to air traffic. Many other volcanic events are continuously causing severe disturbance to world air traffic such as cancellation of flights and closing of airspaces and airports, in Latin America, Asia, North America, Australia among ...
ByRaymetrics S.A. based in  Athens, GREECE
Excess amounts of humid air entering a retail space can create an uncomfortable store ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Commercial and public buildings must protect the health, safety and general well-being of those occupying the ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for occupational health and industrial hygiene include both portable and stationary PM measurement systems as well as solutions for overall industrial hygiene measurements according to ISO16000-34 and ISO16000-37. Our aerosol measurement solutions have been successfully used in various health and safety monitoring and research areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of ...
ByDekati Ltd. based in  Kangasala, FINLAND
ByGeneral Oceanics Inc. based in  Miami, FLORIDA (USA)
ByGeneral Oceanics Inc. based in  Miami, FLORIDA (USA)
ByGeneral Oceanics Inc. based in  Miami, FLORIDA (USA)
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
ByDekati Ltd. based in  Kangasala, FINLAND
As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Numerous studies have shown that non-exhaust emissions can equal or even exceed those from the exhaust, and we have a measurement system for both types of emissions. Also, the discussions around Euro 7 emission standards has increased the interest and need for non-exhaust ...
ByDekati Ltd. based in  Kangasala, FINLAND
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. Air quality monitoring efforts are usually driven by governmental regulation, but may also be motivated by a neighborhood concern or scientific interest. These measurements are performed by researchers in industries or institutions, but they may also be performed by local advocacy groups. When combined with other information (such as weather data, ...
ByTSI Incorporated based in  Shoreview, MINNESOTA (USA)
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
ByEcomesure based in  Saclay, FRANCE
Whether you work in heavy industry, transport and logistics or construction, ground vibration monitoring is a key activity. To control the environmental impact of ground-bourne vibration, such as nuisance vibration or building damage, it’s vital to ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
Since 1970, LSI LASTEM has been producing a series of devices for the evaluation of environments from the point of view of the thermal sensation of the occupants. Data loggers, sensors and software for the evaluation of moderate thermal environments (PMV-PPD-TO, ISO7730), hot (WBGT-ISO7243, PHS-ISO7933) and cold (ITR-ISO11079) compliant with ISO7726. Each device is composed of a data acquisition and display system with local calculation of many useful quantities for a first analysis of the thermal environments, of ...
ByLSI-Lastem srl based in  Settala Premenugo, ITALY