Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Energy
- Waste and Recycling
- Agriculture
- Food and Beverage
- Medical / Health Care
- Metal
- Oil, Gas & Refineries
- Pulp & Paper
- Mining
- Chemical & Pharmaceuticals
- Environmental
- Glassware
- Soil and Groundwater
- Electronics and Computers
- Construction & Construction Materials
- Automobile & Ground Transport
- Aerospace & Air Transport
- University / Academia / Research
- Defense
- Plastics & Resins
- Communications / Telecom / Datacom
- Forestry & Wood
- Maritime/Shipbuild/Water Transport
- Textile
- Health and Safety
- Banking & Finance / Insurance / Legal
- Furniture
- Dry Cleaning
- Retail
- Commercial
- Paint
- Printing
- Real Estate
- Travel & Leisure
- Government
Xprt Product Applications In Hungary
932 applications found
For cardiovascular screening programs the occupational medicine is an ideal place, because effective, but simple and fast enough point of care diagnostic methods, such as Arteriograph can easily be applied at working places, offices, where a large number of employees in their active age are available. The employers are motivated to provide different bonuses to employees and are willing to bear the costs fully or partly of the screening. Cardiovascular screening with a “point of care” Arteriograph ...
ByTensiomed based in  Budapest, HUNGARY
Measurement of oxygen uptake of the pesticides: carbaryl, carbofuran and aldicarb in samples seeded with microorganisms extracted from ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Measurement of oxygen uptake rates in activated sludge processes is essential to their satisfactory operation. Traditionally, oxygen uptake rates (OUR) have been determined by using a dissolved oxygen probe to measure the change in dissolved oxygen in a BOD bottle. While this method is rapid, it provides only a snapshot of the pattern of oxygen uptake in a treatment plant. Much more can be learned about the operation of a treatment plant by measuring the oxygen uptake rate over a period ranging from one to four ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Respirometry solutions for the biofuels ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Geotech supports the monitoring of medical gases within dentistry, hospital and veterinary industries with hand held N2O, O2, CO2 and CO ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen ...
ByHermann Sewerin GmbH based in  Gütersloh, GERMANY
Since 1982, QED has been the leading supplier of air-powered pumps for groundwater sampling, leachate and condensate management, providing expertise in groundwater monitoring, leachate level control and methane recovery systems and equipment to landfills ranging from small municipal facilities to large industrial and military sites, including the leading national and international solid waste management ...
ByQED Environmental Systems, Inc based in  Dexter, MICHIGAN (USA)
Pumps, control systems and supplies for groundwater sample collection at mine sites in the U.S. and around the world. For more than 25 years, QED has been the leading supplier of innovative pumps, control systems and supplies for groundwater sample collection at mine sites in the U.S. and around the world. We’ve specialized in deep well sampling systems, to depths of 1500 ft. Now, our remote data collection systems allow you to monitor your sampling system performance online from any computer, ...
ByQED Environmental Systems, Inc based in  Dexter, MICHIGAN (USA)
Industrial facilities, Superfund sites and other remediation sites. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the ...
ByQED Environmental Systems, Inc based in  Dexter, MICHIGAN (USA)
Renewable energy from biomass: Solid biomass is intended to make a major contribution to the transition from fossil fuels to renewable energies. However, to reach the ambitious goals for heating and energy generation from woody biomass, it will need to be made available in large amounts. In keeping with our slogan, "Technology for a better environment", we have taken up the challenge of finding ways to do ...
ByKomptech GmbH based in  Frohnleiten, AUSTRIA
Statiflo has the most extensive range of Motionless Mixers, for pipes and open channels, suitable for pre-treatment and post-treatment applications: Inlet blending, Disinfection and pH control, Coagulation and flocculation (floc mixer), Remineralisation, Brine dilution before sea outfalls. Statiflo’s unique customised approach to static mixer design provides the most effective mixing solutions for both new treatment plants and retrofits to existing ...
ByStatiflo International Ltd. based in  Macclesfield, UNITED KINGDOM
Processing recyclable and disposable materials out of C&D waste. C&D waste can include almost anything from wood to stones. The TANA Shark can easily handle waste wood, plastics, aluminum profiles, insulation materials and reasonable amounts of ...
ByTana Oy based in  Jyvaskyla, FINLAND
Commercial and industrial waste typically contains different kinds of packaging materials, like hard and soft plastics, cardboard, paper, wires, paper rolls, containers, aluminium, gypsum or any reject from production line of a manufacturing process, sand paper for instance. In other words, a wide variety of different kinds of materials with various requirement to the machines it is treated with. TANA shredders are widely used in treatment of this variety of ...
ByTana Oy based in  Jyvaskyla, FINLAND
Mattresses are usually considered a nightmare in the waste management industry. Mattresses cannot be easily compacted in the landfill, and springs are difficult for most shredders. For low-revving and high-torque TANA Shark shredders, however, mattresses are an easy ...
ByTana Oy based in  Jyvaskyla, FINLAND
Ragger wire or pulper tail is the residue of steel wires and plastic that remains after a pulping process. A mass of recyclable paper is being processed with the help of water. The remaining mass, consisting of wires and plastics of the bales, is called ragger wire. It is often landfilled because no method or machinery can separate the material cost efficiently. But when you can the recovered steel easily justifies the purchase of a TANA shredder. The rest can be landfilled or used as alternative ...
ByTana Oy based in  Jyvaskyla, FINLAND
Sample Type: Mixed liquor solids from an activated sludge process MVLSS = 1320 ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
METHOD: A full-scale compost plant was faced with the need to determine the stability of the compost in the active bays during the compost operation. Samples were collected at 24-ft intervals (2 days of operation) through the length of one bay of the in-vessel compost system and placed into sealed glass reactors. Air was recirculated through the compost material using a peristaltic pump. A caustic scrubber was placed in the recirculation line to remove carbon dioxide (Figure 1). The reaction vessels were connected ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
A pharmaceutical company was interested in knowing whether a specific component, MCB, inhibited the biodegradation of other wastewater constituents. A series of respirometer tests was set up using identical mixtures of wastewater and return activated sludge (RAS) plus varying amounts of MCB. The OUR fingerprint of this wastewater includes a first peak of about 500 mg/L-hr within the first hour of contact that represents the oxidation of highly-biodegradable organic constituents. A second group of readily ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
A pulp mill was interested in evaluating the impact of increasing organic loading rates on the performance of their activated sludge ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
METHOD: A seed culture from a full-scale anaerobic digester was placed in a number of 200 mL respirometer vessels. A synthetic wastewater having a 20,000 mg COD/L in a nutrient/ mineral/buffer solution was fed daily to each reaction vessel — along with various amounts of the cleaning agent The reactors were operated for a four day test period with measurement of gas production using a CHALLENGE ANR-200 anaerobic ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)