Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Agriculture
- Oil, Gas & Refineries
- Air and Climate
- Construction & Construction Materials
- Food and Beverage
- Medical / Health Care
- Energy
- Environmental
- Mining
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Chemical & Pharmaceuticals
- Electronics and Computers
- Aerospace & Air Transport
- Soil and Groundwater
- Textile
- Commercial
- Plastics & Resins
- Glassware
- Health and Safety
- Packaging
- Waste and Recycling
- University / Academia / Research
- Defense
- Paint
- Communications / Telecom / Datacom
- Maritime/Shipbuild/Water Transport
- Travel & Leisure
- Forestry & Wood
- Printing
- Government
- Banking & Finance / Insurance / Legal
- Household Appliances
- Dry Cleaning
- Leather & Tanning
- Real Estate
- Furniture
- Retail
- Logistics
Xprt Product Applications In India
2,727 applications found
Purify benzene, toluene, and xylene (BTX) from refinery or petrochemical aromatics streams such as catalytic reformate or pyrolysis gasoline. This liquid-liquid extraction processes offers lower capital and operating costs, simplicity of operation, range of feedstock, and solvent ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
The key aspects of an alkylation unit pertain to the amount of acid that needs to be made-up on a continuing ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Reactor products can contain gelatinous, deformable solids form in coating formulation. Batch Process: Limited reactor turn-over (constrained through-put) due to long filtration process. Reduce operating costs and batch cycle time, double capacity and increase online ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Sedimentation, flotation, mixing, pulp separation and chemical recovery systems are among the myriad of process equipment WesTech supplies to the pulp and paper industry. Customized to the unique needs of operating plants, WesTech liquid/solids and liquid/liquid separation expertise is built upon years of working with plant operators and owners. The result is a working relationship and reliable ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
Cracking in a refinery is a process where the long organic chains in oil are broken to produce shorter chain organics that are more valuable than the oil. Fluid catalytic cracking (FCC) has generally replaced thermal cracking of petroleum hydrocarbon feed stocks. FCC produces more gasoline with a higher octane rating. FCC’s byproduct gases are more olefinic and valuable than those produced by thermal ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Coal Preparation Circuit: Three quarters of American coal is mined east of the Mississippi River. Half of this is “prepared” coal. Coal preparation offers a number of commercial and environmental benefits. These include increased quality and commercial value of saleable coal by achieving 75-80% ash reduction and 15-80% trace element reduction. Cleaned coal reduces transportation costs as well as reduced quantities of combustion ash requiring disposal. Coal preparation can also make marginal coal ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Many times mining, oil and gas exploration, construction, and other activities take place in remote areas of the world. In these cases it is necessary to provide both potable water and treatment of sanitary wastes for the facility. In addition, many of these activities take place in temporary fashion as the sites will either be developed or abandoned at a future ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Mine backfill is defined as the material used to fill the cavities (i.e., stopes) created by underground mining. Backfilling can be a means to dispose of sludge and/or tailings which may contain hazardous materials and to reduce surface environmental impacts by storing tailings underground. Alternately, backfilling with nonhazardous materials can allow for mining productivity improvements. To these materials are added a variety of fillers such as fly ash, course sand, or gravels along with a binder, such as ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Countercurrent Decantation (CCD): Rock passes into a dump hopper and is then transferred to a vibrating grizzly screen. The oversized material is sent to a jaw crusher. The crushed product is combined with the grizzly undersize and the ore is conveyed to the coarse ore bin. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Filters come in all shapes, sizes, and configurations. WesTech will help you select the right filter. This might include a cluster filter with self-generating backwash, packaged steel tank filters, pressure filters, or even a membrane filter. Selecting filter internals such as underdrains, washtroughs, and media is just as important, and WesTech has more options and expertise than anyone else in the ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
WesTech offers you a comprehensive line of process equipment in the industrial market. Your project will be supported by a reliable engineering team with extensive experience in all types of industrial ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
KREBS cyclones are used in automotive and large vehicle plants. Krebs cyclones improve the cleaning process prior to painting by separating the paint weld balls, metallic particles, oils, grease and phosphate sludge from the cleaning ...
ByFLSmidth A/S based in Valby, DENMARK
Process expertise for sustainable solutions. Challenging municipal budgets. Water shortages. A need for renewable energy. Today, there’s simply no room for waste. Getting the most efficient separation is essential, not just to profitability, but also to ensuring sustainable ...
ByANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA
Rendering is a process that converts waste animal tissue into stable, value-added materials. Edible rendering processes are basically meat processing operations and produce lard or edible tallow for use in food products. Edible rendering is generally carried out in a continuous process at low temperature (less than the boiling point of water). The process usually consists of finely chopping the edible fat materials (generally fat trimmings from meat cuts), heating them with or without added steam, and then ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
Carbon dioxide and oxygen headspace analysis for food and pharmaceutical applications. To ensure product packaging integrity and shelf life, many food and pharmaceutical products are packaged using MAP Modified Atmosphere Packaging. Systech Illinois headspace gas analyzers offers fast, accurate MAP analysis of headspace in gas flushed food and pharmaceutical ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM