Refine by
Industries served
- Monitoring and Testing
- Manufacturing, Other
- Water and Wastewater
- Air and Climate
- Food and Beverage
- Oil, Gas & Refineries
- Agriculture
- Energy
- Environmental
- Mining
- Construction & Construction Materials
- Pulp & Paper
- Medical / Health Care
- Electronics and Computers
- Glassware
- Metal
- Chemical & Pharmaceuticals
- Soil and Groundwater
- Automobile & Ground Transport
- University / Academia / Research
- Paint
- Plastics & Resins
- Health and Safety
- Packaging
- Aerospace & Air Transport
- Printing
- Waste and Recycling
- Textile
- Defense
- Communications / Telecom / Datacom
- Dry Cleaning
- Forestry & Wood
- Maritime/Shipbuild/Water Transport
- Commercial
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Travel & Leisure
- Retail
Xprt Product Applications In Indonesia
1,021 applications found
The calcium content of aqueous solutions of deoxyribonucleic acid (DNA) and deoxyribonucleoprotein (DNP) cannot assayed directly because of interference effects. An acid extraction procedure enabled direct measurements of calcium in DNA and DNP, or a standard addition technique was used at higher ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
The specialty chemicals market covers activities in which the use of specially adapted additives can add value to our clients’ products. Our expertise is based on our own cross-fertilisation strategy: our Application Laboratories follow the technical specifications and use or adapt additives from our various different sectors, from paper and textiles to paints. This approach allows us to offer new, stand-out solutions to our partners and ...
ByProtex International based in  Levallois-Pari, FRANCE
Back in the 1980’s civil engineers were among the first to adapt Operational Modal Analysis (OMA) for testing of large structures. The size of the civil engineering structures and the fact that ambient excitation typically is uncontrollable pushed the development of OMA techniques heavily in this area. Today OMA is a wide spread technology used in many engineering field but testing of civil engineering structures is still the most popular OMA application. Back in 1999, ARTeMIS software was originally ...
ByStructural Vibration Solutions A/S based in  Aalborg East, DENMARK
Servelec Technologies provides highly configurable intelligent monitoring and automation technologies solutions for communications and broadcast applications. Our software and hardware systems are engineered to provide you with immediate notification of alarms and other live conditions, which help to reduce downtime and enable more efficient preventative maintenance ...
ByOvarro based in  Eckington, UNITED KINGDOM
Carbolite Gero offers enhanced furnaces and ovens for the increasing demands of materials science departments in universities and research institutes. Accurate temperature control, combined with secure data-logging, is often an essential requirement of research work in academia, industry and pharmaceutical markets. Carbolite Gero’s complete range of ovens, chamber and tube furnaces are available with secure data-logging with remote connectivity over Ethernet or other industry standard communication ...
ByCarbolite A Verder Company based in  Hope, UNITED KINGDOM
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these purposes. ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Scrap metal identification and sorting are some of the most important tasks in recycling. The analysis might take days if not months, depending on the pile. But if you have a handheld XRF for scrap metal sorting, speed and efficiency are ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
The set of compounds that are formed in a water disinfection process, are collectively referred to as disinfection by-products (DBP). Trihalomethanes (THM) are byproducts of disinfection that are formed when chlorine (or a chlorine based product) is used as a disinfectant. The THMs commonly found in water for human consumption are: chloroform, bromodichloro-methane (BDCM), dibromochloromethane (DBCM) and bromoform , with chloroform usually being the main component. Many trihalomethanes are considered to be ...
ByMultisensor Systems Ltd. based in  Cheadle, UNITED KINGDOM
Sludge Characteristics: Textile printing and dyeing sludge in Xinlong WWTP, which contains a lot of textile fiber fluff, has been tested that the volatile content of textile printing and dyeing sludge is relatively high (about 40%) when the moisture content is changed from 40% to 30%. To prevent explosions during the drying process, a low-temperature dehumidification drying technology with a drying temperature not higher than 90°C is ...
ByGuangzhou Shincci Energy Equipment Co., Ltd. based in  Guangzhou, CHINA
Workplace noise monitoring for occupational noise is one of the most overlooked risks in the workplace. Ignoring this hazard can result in fines or prosecution from organisations like the HSE in the ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Analyzing gold is extremely necessary and relevant today since the products must correspond to the declared quality. The ability to quickly and accurately analyze gold is essential for narrow-profile specialists. For example, in the field of science, research, laboratories, and enterprises. Suppose you’re working in the jewelry industry, with precious metals traders, or you are a jewelry store owner. In that case, gold testing machines for you will be extremely useful and so ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
...
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
Burning biomass and or coal releases particulate matter (PM) to the atmosphere, polluting the surroundings and harming the human health. PM emissions is a common problem in industries that operate furnaces or boilers to generate heat or steam for their processes or for electricity generation to be sold to the grid. The general arrangement of a biomass or coal combustion plant includes a cyclone pre-separator to reduce the concentration of particles after the boiler and a final dedusting ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in  Porto, PORTUGAL
In the areas of chemicals, pharmaceuticals and foodstuffs, there are numerous possible applications for Flottweg Tricanter, Sedicanter and Sorticanter machines as well as decanters, belt presses and separators: Manufacturing lactose and casein in the dairy industry, separating plastics - plastics recycling, algae harvest, manufacturing soya milk and soya proteins, drying okara, manufacturing wheat starch, dewatering PVC, dewatering suspension ...
ByFlottweg SE based in  Vilsbiburg, GERMANY
Computrac moisture, solids and ash analyzers are able to quickly and easily determine solids content of cakes, slurries and sludge samples for the wastewater, hazardous waste and landfill industries. Identifying the optimal solids content of these byproducts of the treatment process can provide significant cost savings on chemical additives, haulage and incineration. Computrac analyzers are easy to use and their rugged and reliable design means that you’ll get accurate results whether they’re in the ...
ByAMETEK Brookfield based in  Middleboro, MASSACHUSETTS (USA)
The Xact® 625i combined with ADAPT software creates the industry's most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification ...
ByCooper Environmental / Sailbri Cooper Inc. based in  Tigard, OREGON (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
A well established track record of safe and reliable performance, is a key requirement for any company operating in the oil and gas industry. Osmoflo's adherence to the highest standards in these areas in design, construction, installation and operation has made it a preferred supplier to many of the leading companies in this field. Invariably oil and gas operations are in remote locations where extreme weather conditions prevail. Osmoflo has a long established track record in providing and supporting the right ...
ByOsmoflo Pty Ltd. based in  Burton, AUSTRALIA