Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Air and Climate
- Medical / Health Care
- Agriculture
- Oil, Gas & Refineries
- Food and Beverage
- Energy
- Mining
- Environmental
- Chemical & Pharmaceuticals
- Electronics and Computers
- Construction & Construction Materials
- Automobile & Ground Transport
- Glassware
- Aerospace & Air Transport
- Pulp & Paper
- Metal
- Plastics & Resins
- University / Academia / Research
- Defense
- Waste and Recycling
- Paint
- Soil and Groundwater
- Forestry & Wood
- Printing
- Commercial
- Communications / Telecom / Datacom
- Health and Safety
- Maritime/Shipbuild/Water Transport
- Textile
- Government
- Travel & Leisure
- Publishing / Media / Marketing
- Retail
- Packaging
- Logistics
Xprt Product Applications In Israel
1,170 applications found
Xenemetrix advanced ED-XRF spectrometers provide on-site quantitative analysis of mining products, thereby reducing the time for receiving results from days to seconds, compared to time consuming laboratory analysis. Materials recovered by mining, minerals or other geological materials that originate from the earth consist of all kinds of base metals - precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash - all of which can be efficiently analyzed by Xenemetrix outstanding ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in  Falmouth, UNITED KINGDOM
Air-powered submersible pumps, equipment for free product recovery and groundwater remediation, air strippers, groundwater sampling. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data ...
ByQED Environmental Systems, Inc based in  Dexter, MICHIGAN (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Ammonia (NH3) is formed from the breakdown of urea in slurry and manure, and hence this is the main source of NH3 emission in the UK. High levels of NH3 emissions can cause a large amount of environmental damage to vegetation. As well as the outward environmental impact, high NH3 concentrations in and around livestock enclosures have a detrimental effect on the health and well-being of the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years. ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Reciprocating internal combustion engines burning natural gas are a source of formaldehyde emissions. There are strict tolerances imposed on operators of engines to ensure that formaldehyde is removed effectively and that formaldehyde emissions are below published limits. The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS
Statiflo has the most extensive range of Motionless Mixers, for pipes and open channels, suitable for blending, dosing and gas / liquid mass transfer applications in: Municipal and industrial water treatment, Municipal and industrial wastewater treatment. Statiflo’s unique customised approach to static mixer design provides the most effective mixing solutions for both new treatment plants and retrofits to existing plants in an industry wide trend away from continuously stirred ...
ByStatiflo International Ltd. based in  Macclesfield, UNITED KINGDOM
Since the inception of water treatment and the monitoring of dirty water, STS has provided renowned manufacturers of respective installations with ...
BySTS Sensor Technik Sirnach AG based in  Sirnach, SWITZERLAND
The main objective in wastewater treatment is to allow human and industrial effluent to be disposed of without endangering human health or the natural environment. We, in EPT, design "tailor made" solutions include physical/chemical and/or biological treatment. The biological solutions includes aerobic treatment, anaerobic treatment allowing biogas production as well as membrane technologies enabling water ...
ByEnvironmental Protection Technologies Ltd. (EPT) based in  Bnei Brak, ISRAEL