Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Agriculture
- Waste and Recycling
- Air and Climate
- Food and Beverage
- Oil, Gas & Refineries
- Medical / Health Care
- Environmental
- Construction & Construction Materials
- Energy
- Mining
- Pulp & Paper
- Chemical & Pharmaceuticals
- Soil and Groundwater
- Metal
- Automobile & Ground Transport
- Glassware
- Electronics and Computers
- University / Academia / Research
- Aerospace & Air Transport
- Defense
- Health and Safety
- Plastics & Resins
- Textile
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Government
- Commercial
- Logistics
- Forestry & Wood
- Printing
- Paint
- Dry Cleaning
- Real Estate
- Travel & Leisure
- Retail
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Furniture
Xprt Product Applications In Italy
2,481 applications found
Fluence has decades of experience delivering cost-effective and sustainable treatment solutions for a wide range of ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for municipal clients, government entities, communities, emergency relief, and private use. Fluence delivers decentralized, ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
Fluence MABR (membrane aerated biofilm reactor) technology address the critical challenges of wastewater treatment plants for: nutrient reduction, high effluent quality, compliance with regulations, minimized energy consumption, at a small footprint, ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
The main problems of wastewater treatment in poultry slaughterhouses are high energy consumption, high maintenance costs and complex treatment of highly contaminated wastewater. The objectives of wastewater treatment in slaughterhouses are to respect the legal limits, produce the minimum possible quantity of sludge and to recover the maximum possible quantity of energy. Fluence employs the following main technologies to design Waste & Wastewater treatment plants: DAF Dissolved Air Flotation: For the initial ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
The "ideal" treatment of waste from beer (and not only) must respect the legal limits, produce the minimum possible quantity of sludge and recover the maximum possible amount of energy. Fluence offers an anaerobic solution on wastewater and sludge + aerobic wastewater treatment. The anaerobic solution uses a "Rapid" granular sludge digester. It is a digester in which a particular type of sludge capable of "granulating" grows and it is used for very low COD (> 2000 Öºmg / l) as long as the waste contains sugars or ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
With Aspiralâ„¢ Smart Packaged plants, installations can meet even the strictest effluent regulations and foster good relations with neighboring communities The oil and natural gas extraction industry is booming, and where there's a boom, there's a workforce that needs shelter. Typically, impromptu housing springs up to meet the need, but often, these so-called "man camps" overstress the sanitary infrastructure of nearby towns or go without wastewater treatment entirely, endangering human health and the environment. ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
Small footprint. Large impact. Nitro provides shortcut nitrogen removal for high-strength sidestream wastewater flows using MABR technology - saving time, money, and carbon footprint. Nitro is a powerful, energy-saving solution for streams containing high levels of nitrogen, including: Anaerobic digestion Co-digestion Leachate Compost Swine or cow farms Fertilizer ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Excess amounts of humid air entering a retail space can create an uncomfortable store ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Commercial and public buildings must protect the health, safety and general well-being of those occupying the ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
CO2 Sensors for Air Quality & HVAC Systems: Modern indoor air quality (IAQ) systems, demand-controlled ventilation (DCV), and building management systems (BMS) depend on accurate, energy-efficient CO2 monitoring to optimise air changes without unnecessary energy waste. Gas Sensing’s ultra-low power solid-state sensors are designed to run for years on battery power, making them ideal for wireless battery powered or energy harvesting, distributed IoT air quality systems – especially in retrofit ...
ByGas Sensing Solutions Ltd (GSS) based in  Cumbernauld, UNITED KINGDOM
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
ByPalas GmbH based in  Karlsruhe, GERMANY
The highest standards of accuracy and reliability are required in laboratories and medical devices. STS products are perfectly suited to this purpose – an example is their use in pressure and measurements of dialysis ...
BySTS Sensor Technik Sirnach AG based in  Sirnach, SWITZERLAND
When the use Angiodroid The CO2 Injector is safe and effective; As is increasingly demonstrated, the use of CO2 as a Contrast Agent can bring considerable advantages in many types of intervention in the field of Interventional Cardiology, Interventional Radiology, Interventional Angiology and Vascular Surgery. Because of its Gas Properties, Carbon Dioxide infact can be injected into each lumen structure (arterial, venous, biliary tract, abscesses, fistulas) below the diaphragm. It is especially indicated for ...
ByAngiodroid Spa based in  San Lazzaro di Savena (BO), ITALY
After an EVAR or PEVAR procedure, you will be given pain medication if needed and will be able to gradually get out of bed, walk, and eat solid foods. You may feel well enough to resume your normal activities in 4 to 6 weeks. Endovascular repair means you will need regular follow up visits with your doctor: a month afterward, at six months, and each year following your procedure. The visits will include a physical exam and an ultrasound, CT scan, or angiography to check for any ...
ByEndologix LLC based in  Irvine, CALIFORNIA (USA)
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Incinerator Bottom Ash (IBA) is the material discharged through the grate of a Waste to Energy facility after incineration of municipal solid waste (MSW). Depending on the waste being incinerated IBA can contain varying quantities of glass, ceramics, brick, concrete and metals in addition to clinker and ...
ByKiverco Ltd. based in  Dungannon, NORTHERN IRELAND
The treatment of municipal solid waste is intended to recover essential raw materials. Forrec has developed a wide range of special plants for recycling municipal solid waste (MSW). The technologies employed by Forrec are aimed at sorting and recovering high quality recyclable municipal and industrial materials suitable for market needs and for energy recovery from non-recyclable dry waste (SRF). Separation of materials takes place using an automatic sorting system, which involves various types of tools: including ...
ByFOR REC S.P.A. based in  Santa Giustina in Colle, ITALY