Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Agriculture
- Waste and Recycling
- Air and Climate
- Food and Beverage
- Oil, Gas & Refineries
- Medical / Health Care
- Environmental
- Construction & Construction Materials
- Energy
- Mining
- Pulp & Paper
- Chemical & Pharmaceuticals
- Soil and Groundwater
- Metal
- Automobile & Ground Transport
- Glassware
- Electronics and Computers
- University / Academia / Research
- Aerospace & Air Transport
- Defense
- Health and Safety
- Plastics & Resins
- Textile
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Government
- Commercial
- Logistics
- Forestry & Wood
- Printing
- Paint
- Dry Cleaning
- Real Estate
- Travel & Leisure
- Retail
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Furniture
Xprt Product Applications In Italy
2,478 applications found
Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
In industrial cooling towers, bacterial growth on surfaces (biofilm) causes serious problems, both contributing to the deterioration of materials and, most important, increasing the risk of harmful microbiological contaminations (e.g. Legionella pneumophila). For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such ...
ByAlvim Srl based in Genova, ITALY
In industrial cooling towers, biofilm growth can cause serious problems, both contributing to the deterioration of materials and, most important, increasing the risk of harmful microbiological contaminations (e.g. Legionella). For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such systems. The manager of this cooling tower planned to automatically dose chlorine continuously (24/7) in the water; later on, he decided to install an ALVIM probe in the plant, ...
ByAlvim Srl based in Genova, ITALY
In a heat exchanger, a major component of any power plant, a 20 microns thick bacterial layer (biofilm) can cause a 30% decrease in thermal efficiency: biofilm, indeed, is up to 4 times more insulating than calcium carbonate scale. Moreover, biofilm can increase inorganic fouling, producing sticky substances that increase particles adhesion. For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such systems. The manager of this power plant decided to install ...
ByAlvim Srl based in Genova, ITALY
Even when it has not been created by pathogenic bacteria, biofilm is the ideal environment for the survival and growth of pathogens, includingLegionella pneumophila. It is well known that such bacteria do not usually form biofilms by themselves, but they are commonly found in biofilms made by other bacteria. This kind of environment greatly increases Legionella possibility of survival and growth. Thus, the best way to prevent Legionella outbreaks is limiting biofilm ...
ByAlvim Srl based in Genova, ITALY
PROCESS INFORMATION: In the production of Nylon filaments, polymer is melted and then pumped through a sand filter to a spinnerette. The filaments formed by the spinerette are cooled and solidified by air, before going to a humidifying chamber to stabilise the length of the spun polymer. The yarn filaments are then lubricated by a finishing agent and then stretched or ‘drawn’ to a desired diameter before being wound onto a ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
TenCate Geotube technology is used for agriculture applications to reduce the waste in lagoons and utilize the contained nutrients for crops. This dewatering technology reduces the lagoon size by 50%, reduces labor and energy for land application by 50-70%, stores contained nutrients until needed for crops, provides higher quality flush water and reduces the odor and insect problems normally encountered. Over time, these solids dry in the dewatering containers, making the contained nutrients easier to transport ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS
After an EVAR or PEVAR procedure, you will be given pain medication if needed and will be able to gradually get out of bed, walk, and eat solid foods. You may feel well enough to resume your normal activities in 4 to 6 weeks. Endovascular repair means you will need regular follow up visits with your doctor: a month afterward, at six months, and each year following your procedure. The visits will include a physical exam and an ultrasound, CT scan, or angiography to check for any ...
ByEndologix LLC based in Irvine, CALIFORNIA (USA)
Treating metalworking wastewater means the separation of oils, heavy metals and suspended solids, water reuse, disposal costs reduction and sustainability improvement. Mechanical workshops generate effluents containing lubricating oils with significant levels of COD (Chemical Oxygen Demand), hydrocarbons, metals and suspended solids. These workshop wastewaters may come from a variety of operations such as cutting and drilling, molding, cleaning of mechanical parts, paint shops, maintenance, drainages from settling ...
ByEVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY
The high pressure pump used at the yard or on the road is absolutely necessary to: Clean the vehicle in all its parts, wheels, internal and external surfaces. Clean and cool the working parts during rebuilding of the new road asphalt. Plaster scarification. Rapid cleaning of hard asphalt or cement at ended ...
ByNeron Pumps based in Ranica, ITALY
Hydraulic being available in all the trenchers working in the most impervious and remote areas of the planet, whilst electricity is unavailable in any cases or unacceptable for safety reasons and compressed air presents problems at higher ...
ByNeron Pumps based in Ranica, ITALY
Coil coating makes use of a simple, but effective principle, to clean, pretreat and coat flat coils or sheets of steel or aluminium in a continuous operation, before other stages of industrial manufacture. Pickling is the cleaning part of this operation where acids are used to remove oxide layer and other ...
ByMST Chemicals based in San Zenone al Lambro, ITALY
In industry, a lot of water is needed and is contaminated by a wide range of pollutants in the most diverse production processes. Unfortunately, most of the industrial waste water is wasted. In order to avoid this, we are developing high-performance waste water treatment plants with the vacuum evaporator as the core element. ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Incinerator Bottom Ash (IBA) is the material discharged through the grate of a Waste to Energy facility after incineration of municipal solid waste (MSW). Depending on the waste being incinerated IBA can contain varying quantities of glass, ceramics, brick, concrete and metals in addition to clinker and ...
ByKiverco Ltd. based in Dungannon, NORTHERN IRELAND
The treatment of municipal solid waste is intended to recover essential raw materials. Forrec has developed a wide range of special plants for recycling municipal solid waste (MSW). The technologies employed by Forrec are aimed at sorting and recovering high quality recyclable municipal and industrial materials suitable for market needs and for energy recovery from non-recyclable dry waste (SRF). Separation of materials takes place using an automatic sorting system, which involves various types of tools: including ...
ByFOR REC S.P.A. based in Santa Giustina in Colle, ITALY