- Home
- Applications
- italy
- air analysis
Refine by
Air Analysis Product Applications In Italy
14 applications found
Environmental Monitoring & Fugitive ...
ByAMETEK MOCON based in Brooklyn Park, MINNESOTA (USA)
Hundreds of government agencies and companies have embraced the speed and detection capability of DART® mass spectrometry. The use of open air ionization simplifies analysis of even the most complex samples. ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)
Elemental analysis is a generic term for a group of applications which deal with the analysis of a variety of materials (chemicals, liquids, polymers, waste material, etc.) for their elemental or isotopic properties. Typical examples of elemental analysis techniques where mass flow control plays a key role are Total Organic Carbon (TOC) or Total Organic Halides ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
Premium
When you work with dangerous compounds like carcinogenic and/or toxic hydrocarbons you need to safeguard the working conditions of your employees by continuously monitoring the indoor air quality. With Synspec analysers you can set alarms at prescribed threshold values and stay away from health risks. All measurements are stored and are retrievable even after years of operation. This way you can prove to authorities that your employees were not exposed to concentrations above the threshold limit since the ...
BySynspec BV based in Groningen, NETHERLANDS
Premium
INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION Mercury and its compounds are highly toxic substances fo r humans. It occurs naturally and exists in various forms: elemental (or metallic); inorganic (e.g. mercuric chloride); and organic (e.g., methyl- and ethylmercury). These forms all have different toxicities and implications for health. Among naturally occurring mercury compounds, methylme rcury exerts a significant influence (neurotoxic action) on human ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Port environments can be particularly exposed to air pollution, both in gaseous form and as particles. The ships are an obvious source, but both activities related to the unloading and loading of goods and land traffic to and from the ports can also contribute. Monitoring the concentration of air pollutants can be done both in order to monitor the environment in general and to map the sources. In the case of emissions from ships, it may be of particular interest to monitor sulfur dioxide (SO2) levels near the ...
ByOPSIS AB based in Furulund, SWEDEN
The environment is increasingly affected by the pollutant concentration such as nitrogen and sulfur oxides in the atmosphere, or particles from industrial activities. In order to understand how best to improve our air quality, many smart cities have been engaged in monitoring air quality. ECOMESURE offers instruments that measure and analyse the air quality, as well as the proportion of polluting particles and gases in the ...
ByEcomesure based in Saclay, FRANCE
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The emission challenge is significant to ETG Risorse e Tecnologia. For years it has been engaged in providing instrumentation and support to authorities and companies operating in the environmental sector. Climate change is a scientifically established reality, as is its anthropogenic origin; emissions of pollutants into the atmosphere are one of its leading causes. Their monitoring - in addition to being mandatory - allows their level to be kept under control. ETG fully supports the Green Deal and the European ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND