- Home
- Applications
- italy
- shredding system
Show results for
Refine by
Shredding System Product Applications In Italy
45 applications found
FORREC has designed an exclusive plant that provides specific processing for this type of waste. The system developed and produced by Forrec consists in a treatment with a four-shaft shredder that provides a reduction to less than 40mm allowing the subsequent separation of iron, plastic and non-ferrous materials. A dust suction system is combined with a shredding ...
ByFOR REC S.P.A. based in Santa Giustina in Colle, ITALY
The restricted operating spaces on board of a boat make essential the use of compact shredders for optimizing it. These shredders must ensure the required performance in terms of shredding capacity. SatrindTech proposes three models: one at 3hp, one at 10hp and one at 15hp. SatrindTech’s shredders at 3hp are MARPOL 73/78 – Annex V, approved. The other two models available, the 10 and the 15hp models can use special blade sets that can grant the same performances of the certified shredder. The goal to ...
BySatrindTech Srl based in Arluno, ITALY
The shredders proposed by SatrindTech for this application are two-shaft type in the case of a simple volume reduction, used for achieving an optimization of the logistic processes (resulting in significantly reduce transport costs and material storage once shredded) and single-shaft, three- and four-shaft if the goal is to recycle material discarded from the production line. The two-shaft shredders can also be fitted with the special CL counterblade system that allows a ...
BySatrindTech Srl based in Arluno, ITALY
The shredding process of this pharmaceutical waste can be carried out with the three type of machines by SatrindTech: the single shaft, the three- and the four-shaft shredders. The purpose of the process is twofold: to recover the plastic blister and to destroy expired medicines ...
BySatrindTech Srl based in Arluno, ITALY
Made of polyethylene raffia fabric (PE) or polypropylene (PP), as well as in jute or non-woven fabric, this kind of containers are used in different industries: from material handling (raw materials food, building construction material, just to name a few). Once finished their life cycle, the big bags are reconditioned and reused or recycled in order to retrieve the polypropylene. The SatrindTech shredders are used in the different phases of the recycling process in order to prepare the material for the further ...
BySatrindTech Srl based in Arluno, ITALY
The metal industry recovers part of the material by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the ...
BySatrindTech Srl based in Arluno, ITALY
SatrindTech shredders are used within the recycling lines of refrigerators. When treated properly, it is possible obtains a total of nearly 90% in different materials (among which iron, plastic, polyurethane, aluminum and copper) from these product. The two shaft shredders are used as primary crushers if used as the first step of the process as they are used for a volume reduction after the collecting cycle, while the three-shaft and four-shaft are used as secondary shredding as they allow a controlled ...
BySatrindTech Srl based in Arluno, ITALY
The volume reduction of food scraps is operated for an optimization during the handling and transportation. The two-shaft shredders used for this application allows a reduction in the volume of more than 60% of the initial ...
BySatrindTech Srl based in Arluno, ITALY
They are all those plastic and textile materials in the car that can be shredded. SatrindTech proposes a two-shaft shredders for volume reduction of bumpers, headlights and three- and four-shaft shredders for shredding automotive interior fabric, sponge and plastic type of synthetic ...
BySatrindTech Srl based in Arluno, ITALY
An interesting variant of hard disk shredding consists of the secure data destruction h5 which complies with the DIN 66399-2 requirements. Safe destruction makes it impossible to trace any data contained in hard disks, or similar data storage products, once the storage media has been destroyed. There are many international regulations concerning the safe destruction of documents. They set different destruction methods and levels of security to the required class of protection. This information can be found in our ...
BySatrindTech Srl based in Arluno, ITALY
An interesting variant of hard disks shredding consists of the secure data destruction h5 which complies with the DIN 66399-2 requirements. Safe destruction makes it impossible to trace any data contained in hard disks, or similar data storage products, once the storage media has been destroyed. There are many international regulations concerning the safe destruction of documents. They set different destruction methods and levels of security to the required class of protection. This information can be found in our ...
BySatrindTech Srl based in Arluno, ITALY
All those textile materials (derived from natural or synthetic fibers) arrived at the end of the cycle, carpeting and rugs are shredded and used inside the mix of materials composing the RDF or SRF. The operation can be carried out in two or in one single stage. A two-stage process (volume reduction with two-shaft shredders and subsequent refinement of the final size of the material with single-, three- or four-shaft shredders) will grant a higher production and energy saving (in proportion) while, if processed ...
BySatrindTech Srl based in Arluno, ITALY
Bulky waste (such as doors, furniture, mattresses, sofas, beds, nets, furniture, etc.) are generally addressed to a landfill for its disposal. For this reason, it is essential to operate an optimization of the materials size before procceding with the disposal. SatrindTech therefore proposes two-shaft shredders and crushers which ensure high ...
BySatrindTech Srl based in Arluno, ITALY
The production processes within the plastic industry foresee the use of hot working machines and systems which generate a high percentage of production waste. The resulting waste material (purges in the case of extrusion plants or defective products in general proceeding from injection moulding lines, blow molding, production of plastic film, of tanks) can be reintroduced again in the production process (if the characteristics of the processed product are suitable) or used as the second material for other ...
BySatrindTech Srl based in Arluno, ITALY
The recovery of PE films for agricultural use is done in a dedicate treatment plant where the first operation to be done is to reduce the volume of the film using two-shaft shredders. Once shred, the material is then processed by granulators, washing and drying machines and finally extruded and pelletized using the dedicated ...
BySatrindTech Srl based in Arluno, ITALY
The shredding of paper waste is carried out for two main purposes: shredding for recycling or shredding for destroying. In the first case we have a volumetric reduction (done with two-shaft shredders) in order to obtain the ideal size for proceeding with baling or pressing. In the second case, is more related to the safe destruction of the information contained in private and confidential documents, which dimensions have to be done in according to the DIN 66399 directive. This establishes the security parameters ...
BySatrindTech Srl based in Arluno, ITALY
The constant technological improvements of the electronic devices and the subsequent obsolescence of the electronic equipment we use on a daily base has increased the amount of the material to be processed in the metal and plastic recycling business. PCs, laptops, smartphones, USB sticks, credit cards, microwaves, washing machines are just some examples of the products that can be processed in order to recover ...
BySatrindTech Srl based in Arluno, ITALY
SatrindTech has developed a nitrogen-blanketing system to defuse the possible explosions during the shredding process. ...
BySatrindTech Srl based in Arluno, ITALY
The aluminum industry recovers much of the material required by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the ...
BySatrindTech Srl based in Arluno, ITALY
ByMolinari S.r.l. based in Lenna (Bergamo), ITALY