- Home
- Applications
- italy
- water optimization
Refine by
Water Optimization Product Applications In Italy
22 applications found
We have the sensors needed to make sure water conditions are optimal for your ...
BySolinst Eureka LLC based in  Austin, TEXAS (USA)
Premium
The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
We have the sensors needed to make sure water conditions are optimal for your ...
BySolinst Eureka LLC based in  Austin, TEXAS (USA)
We have the sensors needed to make sure water conditions are optimal for your ...
BySolinst Eureka LLC based in  Austin, TEXAS (USA)
Premium
At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective fluorimetric method for the ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
We transport chemicals with ease in any industrial environment: ProMinent solutions store, transfer and meter substances at rates of 0.1 l/h to 40,000 l/h at a pressure of 2 to 3,000 ...
ByProMinent GmbH based in  Heidelberg, GERMANY
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
All of them have to find efficient and effective solutions to optimize the available resources for an ever more high competitiveness and, contextually, to comply with the most stringent regulations about the protection of the environment. ...
ByEVALED - Evaporator - Veolia Water Technologies Italia Spa based in  Zoppola (PN), ITALY
Premium
In order to ensure high efficiency of steam boilers an optimal boiler water treatment is essential. System disturbances caused by boiler scale, corrosion, local overheating or carryover into the steam reduce the operational safety and may cause substantial economic losses. Kurita therefore provides innovative technologies for boiler water treatment and boiler service to prevent scale and corrosion in the entire boiler system, including the feedwater tank, boiler, ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
The appropriate quality of water supplied to a process with a re-circulating system allows for the following: Savings as a result of the amount of water used. Increases the amount of water available. Decreases costs of waste water disposal (and unwanted spills). Maintains a high quality of ...
BySistema AZUD, S.A. based in  Alcantarilla, SPAIN
Chemical tankers transport an enormous variety of chemical and oil products in global trade. Due to this variety the next cargo is almost never identical to the previous one. Thus, tank cleaning is essential with chemical, alimentary and product tankers. The products that need to be cleaned vary widely in their properties and characteristics. In addition, the chemical industry, the food industry, and their customers constantly increase quality requirements ...
ByPOZZI LEOPOLDO SRL based in  Barlassina, ITALY
Premium
The quality of fresh concrete decides over the life time of buildings. Only the optimal composition of water, cement, sand and gravel guarantee stability. ...
ByIMKO Micromodultechnik GmbH based in  Ettlingen, GERMANY
TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries. In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%. The dewatering containers can be custom-sized to the application, placed in available space between other ...
ByTenCate Geosynthetics Netherlands bv based in  Hengelo, NETHERLANDS
With worldwide concerns about water scarcity, agriculture is under pressure to improve water management and explore available options to match supply and demand. Desalination is a technical option to increase the availability of freshwater both in coastal areas with limited resources and in areas where brackish waters – such as saline groundwater, drainage water and treated wastewater – are available. Desalinated water can also be crucial in emergency situations where water sources have been polluted ...
ByOsmo Sistemi S.r.l. based in  Fano (PU), ITALY
We can help you manage the lifecycle of your water and wastewater infrastructure. Build, design, and operate raw water transmission, treatment, and distribution systems to deliver potable water or sanitation systems to collect and convey sewerage and storm runoff for treatment. Our multi-discipline design solution will help you design and build better treatment plants. Our solution to plan, design, model, and analyze networks will help you to build better transmission and distribution ...
ByBentley Systems, Incorporated based in  Exton, PENNSYLVANIA (USA)
The grades are in: a 2006 national report,Greening America’s Schools, concluded that environmentally friendly school buildings lead to lower operating costs, improved test scores, and enhanced student health. The report, produced by Capital E and co-sponsored by The American Institute of Architects (AIA), concluded that environmentally friendly schools save an average of $100,000 each year. The study examined 30 green schools built between 2001 and 2006, and determined that the total financial benefits of ...
ByDynamic Air Quality Solutions based in  Princeton, NEW JERSEY (USA)
TenCate Geotube technology provides cost-effective and efficient dewatering and containment in the mining and mineral processing industry. In mining and mineral processing (mine tailings, coal sludge, etc), TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or reduces storage footprint by sometimes 50 to 80%. Conditioners or polymers are normally used to promote flocculation to improve dewatering rates, solids retention, filtrate ...
ByTenCate Geosynthetics Netherlands bv based in  Hengelo, NETHERLANDS
The SDI is an irrigation technique that allows the supply of water and nutrients in a localized way under the surface. This fact conditions and optimizes the growing of roots and the development of the plant. This practice makes possible a more efficient use of the water, energy and fertilizers, becoming the alternative with best results from an economic, agronomic and ecologic point of ...
BySistema AZUD, S.A. based in  Alcantarilla, SPAIN
With our innovative technology, we offer a one-machine solution that effectively measures, monitors, and controls the water content in forming gas, ensuring optimal heat treatment processes. ...
ByCambridge Sensotec Limited based in  St. Ives, UNITED KINGDOM