Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Agriculture
- Waste and Recycling
- Air and Climate
- Food and Beverage
- Oil, Gas & Refineries
- Medical / Health Care
- Environmental
- Construction & Construction Materials
- Energy
- Mining
- Pulp & Paper
- Chemical & Pharmaceuticals
- Soil and Groundwater
- Metal
- Automobile & Ground Transport
- Glassware
- Electronics and Computers
- University / Academia / Research
- Aerospace & Air Transport
- Defense
- Health and Safety
- Plastics & Resins
- Textile
- Packaging
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Government
- Commercial
- Logistics
- Forestry & Wood
- Printing
- Paint
- Dry Cleaning
- Real Estate
- Travel & Leisure
- Retail
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Furniture
Xprt Product Applications In Italy
2,478 applications found
In combined cycles, Turboden ORC units can be installed downstream of gas turbines and reciprocating engines, producing electricity by recovering waste heat. In both cases the combined cycle achieves an efficiency greater than 50%. The power of Turboden turbogenerators in this application generally ranges up to 20 MW electric per single ...
ByTurboden S.p.A based in  Brescia, ITALY
Turboden ORC units can produce electricity by recovering heat from industrial processes and in combined cycles with reciprocating engines and gas turbines. The power of Turboden turbo generators in this application generally ranges up to 20 MW electric per single ...
ByTurboden S.p.A based in  Brescia, ITALY
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Create more efficient power ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
You might wonder what Operational Modal Analysis, OMA, is and how it differs from the traditional Experimental Modal Analysis (EMA) that has been around for the past few decades. Operational Modal Analysis is also called output-only modal analysis, ambient response analysis, ambient modal analysis, in-operation modal analysis, and natural input modal ...
ByStructural Vibration Solutions A/S based in  Aalborg East, DENMARK
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
We are the world’s leading supplier of UV water treatment packages for the oil, gas and petrochemical industry. With over 35 years experience in both onshore and offshore sectors, atg UV has worked closely with the world’s leading oil and gas operators, service companies and design contractors to deliver innovative, robust and reliable water treatment solutions for a range of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide. atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Before natural gas or oil is transported through new pipelines, the entire length of the pipeline assembly is pressure tested using either fresh water or seawater, and is the final construction ‘quality assurance’ test before the pipeline is put into operation. The pressure test is held for a specific amount of time, from between 1 day and 100 days, to ensure structural integrity before the pipeline is placed into ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
In industrial cooling towers, bacterial growth on surfaces (biofilm) causes serious problems, both contributing to the deterioration of materials and, most important, increasing the risk of harmful microbiological contaminations (e.g. Legionella pneumophila). For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such ...
ByAlvim Srl based in  Genova, ITALY
In industrial cooling towers, biofilm growth can cause serious problems, both contributing to the deterioration of materials and, most important, increasing the risk of harmful microbiological contaminations (e.g. Legionella). For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such systems. The manager of this cooling tower planned to automatically dose chlorine continuously (24/7) in the water; later on, he decided to install an ALVIM probe in the plant, ...
ByAlvim Srl based in  Genova, ITALY
In a heat exchanger, a major component of any power plant, a 20 microns thick bacterial layer (biofilm) can cause a 30% decrease in thermal efficiency: biofilm, indeed, is up to 4 times more insulating than calcium carbonate scale. Moreover, biofilm can increase inorganic fouling, producing sticky substances that increase particles adhesion. For these reasons, large amounts of chemical substances (biocides) are used to limit microbiological growth in such systems. The manager of this power plant decided to install ...
ByAlvim Srl based in  Genova, ITALY
Even when it has not been created by pathogenic bacteria, biofilm is the ideal environment for the survival and growth of pathogens, includingLegionella pneumophila. It is well known that such bacteria do not usually form biofilms by themselves, but they are commonly found in biofilms made by other bacteria. This kind of environment greatly increases Legionella possibility of survival and growth. Thus, the best way to prevent Legionella outbreaks is limiting biofilm ...
ByAlvim Srl based in  Genova, ITALY
We adapted an autologous ex-vivo gene therapy method to load the patient’s own TEMs precursors, that are hematopoietic stem and progenitor cells (HSPCs), with an immunotherapeutic transgene sequence. By re-introducing gene-modified HSPCs into the patient, we seek to take advantage of the self-renewing and multi-differentiation capability of HSPCs to enable durable and potentially long-term effects following a single ...
ByGenenta Science based in  Milano, ITALY
When the use Angiodroid The CO2 Injector is safe and effective; As is increasingly demonstrated, the use of CO2 as a Contrast Agent can bring considerable advantages in many types of intervention in the field of Interventional Cardiology, Interventional Radiology, Interventional Angiology and Vascular Surgery. Because of its Gas Properties, Carbon Dioxide infact can be injected into each lumen structure (arterial, venous, biliary tract, abscesses, fistulas) below the diaphragm. It is especially indicated for ...
ByAngiodroid Spa based in  San Lazzaro di Savena (BO), ITALY
Ensure production quality in clean zones with superior air decontamination. Genano Technology® is scientifically proven to eliminate nano sized particles and eliminate 99,999% of microbes from indoor air. ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in  Espoo, FINLAND