Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Air and Climate
- Oil, Gas & Refineries
- Electronics and Computers
- Food and Beverage
- Energy
- Construction & Construction Materials
- Agriculture
- Environmental
- Medical / Health Care
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Mining
- Glassware
- Aerospace & Air Transport
- Chemical & Pharmaceuticals
- Waste and Recycling
- University / Academia / Research
- Health and Safety
- Defense
- Soil and Groundwater
- Plastics & Resins
- Communications / Telecom / Datacom
- Packaging
- Forestry & Wood
- Maritime/Shipbuild/Water Transport
- Textile
- Paint
- Retail
- Printing
- Government
- Commercial
- Dry Cleaning
- Household Appliances
- Real Estate
- Travel & Leisure
- Logistics
Xprt Product Applications In Japan
1,331 applications found
Precision etch dimension measurement of hard disk heads. In order to reliably produce hard disk heads with proper performance, a disk head manufacturer must be able to measure the etch dimensions accurately. The required precision can be on the order of a few tenths of a micron or less, requiring nanometer-level detection of the pole tip and the locations of the various edges of the etched steps. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Production inspection of hard drive Head Gimbal Assemblies (HGAs) requires the accurate measurement of a number of critical factors to meet tight tolerances. These include pitch and roll angles, slider positioning, and slider orientation/alignment ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Slider inspection is a critical data storage manufacturing process that presents difficult challenges from a metrology perspective. Slider inspection requires the acquisition and measurement of relatively small feature sizes with tight tolerances while also demanding short cycle times to provide high throughput for large production ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Inspection of data storage flexure suspension assemblies requires extremely accurate and repeatable metrology capabilities, along with special features such as integrated laser auto-focus, versatile lighting, multiple magnifications, and highly programmable ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Precision cutting tools such as end mills represent especially difficult process control challenges for metrology systems because they require extremely precise features, dimensions, and cutting surfaces in order to deliver consistent results when deployed within demanding machining ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
The accurate measurement of precision watch components places a number of special challenges on metrology systems used for inspection and process control. The small part sizes, variety of shapes, different gear geometries, and tight clearance specifications are all critical considerations when designing a metrology application for process control and inspection of watch ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous ...
ByEcosorb by OMI Industries based in  Palatine, ILLINOIS (USA)
The Wercs has developed an online reporting module which enables manufacturers to completely eliminate the manual system that is in place for VOC/HAPs reporting. This new module automatically gathers VOC/HAPs data from SDSs and cross-references it with the order history. Your customers can now go to a secured website, enter the name of the product and get a complete VOC/HAPs emission analysis for annual reporting ...
ByUL Solutions LLC- WERCS Studio based in  Bentonville, ARKANSAS (USA)
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in  Falmouth, UNITED KINGDOM
Air-powered submersible pumps, equipment for free product recovery and groundwater remediation, air strippers, groundwater sampling. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data ...
ByQED Environmental Systems, Inc based in  Dexter, MICHIGAN (USA)
The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Ozone is an allotropic form of oxygen; each molecule contains three atoms of oxygen instead of the usual two. Ozone is a powerful disinfectant and has been used commercially for the treatment of potable water since 1904. It is produced on site in the same way that ozone is formed naturally, by the discharge of electricity during a thunderstorm. A high voltage is passed across a gas stream containing oxygen. This method of ozone generation is called corona discharge. The energy of the high voltage splits an ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
MANTECH’s game-changing water quality analysis technology is revolutionizing wastewater treatment at industrial and municipal facilities worldwide. The PeCOD Analyzer provides accurate chemical oxygen demand (COD) results and biochemical oxygen demand (BOD) estimates within minutes rather than the hours or days required for standard COD and BOD testing — without the use of dichromate, mercury, acids and other harmful ...
ByMANTECH Inc. based in  Guelph, ONTARIO (CANADA)
International Products Corporation has been selling cleaners to the filter membrane industry for over 30 years. Our proprietary formulated cleaners work effectively at restoring 100% flux at safe pH ranges. We have a wide variety of chemistries available for all membranes and soils and an on-site R&D laboratory that offers technical support and assistance. All of our cleaners are free of solvents, phosphates, silicates, phenols, and Substances of Very High ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items. They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals. When rinsed properly our products leave absolutely no residue. They are also proven in removing soils from filter membranes used in wastewater treatment ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
Our mild yet powerful multi-purpose cleaners are effective in both industrial and critical cleaning applications. Their unique formulation of chelants, ionic, and non-ionic ingredients produce a variety of cleaning actions that include lifting, dispersing, emulsifying, sequestering, suspending and decomposing. They are outstanding for cleaning labware, ceramics, and stainless steel. Our detergents can replace hazardous cleaning agents used to remove radioactive materials from glassware, equipment, bench tops, ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)