Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Air and Climate
- Oil, Gas & Refineries
- Electronics and Computers
- Food and Beverage
- Energy
- Construction & Construction Materials
- Agriculture
- Environmental
- Medical / Health Care
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Mining
- Glassware
- Aerospace & Air Transport
- Chemical & Pharmaceuticals
- Waste and Recycling
- University / Academia / Research
- Health and Safety
- Defense
- Soil and Groundwater
- Plastics & Resins
- Communications / Telecom / Datacom
- Packaging
- Forestry & Wood
- Maritime/Shipbuild/Water Transport
- Textile
- Paint
- Retail
- Printing
- Government
- Commercial
- Dry Cleaning
- Household Appliances
- Real Estate
- Travel & Leisure
- Logistics
Xprt Product Applications In Japan
1,331 applications found
P-80 Lubricants are the perfect solution for rubber assembly and repairs for agricultural equipment used by farmers, agricultural contractors, gardening specialists, equipment manufacturers and OEMs. P-80 has been used for years to maintain equipment and replace parts such as seals, O-rings, hoses, grommets, and ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances have rubber or soft plastic components such as hoses, O-rings, seals, grommets, plugs and more. The slip resistance of these parts makes assembly difficult. P-80® temporary rubber assembly lubricants significantly reduce friction helping these parts slide easily into ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
P-80 Lubricants provide a safe and easy way to improve automotive assembly operations. Rubber’s non-slip quality can make an assembly process very difficult. Without an assembly aid, tight-fitting rubber components can cause production to slow down, and quality and safety standards to slip. The P-80 line is specially formulated to provide temporary lubrication that makes rubber easy to install, remove, or otherwise ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
The bus transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
The boat, marine engine and accessory industry relies heavily on natural and synthetic rubber for various purposes including engines, propeller hubs, pumps, hoses, seals, O-rings and grommets. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve assembly operations of rubber and soft plastic ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
The transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, grips, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
P-80 Lubricants are the perfect solution for pump and seal repairs. They have been used for years by pump manufacturers, HVAC companies, pool & spa manufacturers, treatment plant operators and maintenance professionals to maintain equipment and replace parts such as seals, O-rings, hoses, grommets, and ...
ByInternational Products Corporation based in  Burlington, NEW JERSEY (USA)
Instrument for biodegradability analyses. The degradation of biodegradable polymers and biodegradable plastics crucially depends on the environments they may end up in, such as soil, fresh or marine water, landfill or composting site. Owing to the great variations in natural conditions, several tests are needed to determine the fate of a polymer material in real life and to study its biodegradability in different environments. In aerobic environments, the biodegradability is usually determined by measuring ...
ByBPC Instruments AB based in  Lund, SWEDEN
Test Setup: A series of dilutions consisting of 50, 75, 100, 125, 150, and 175 mL of test wastewater were added to respective 500 mL respirometer flasks along with nutrients, minerals, and buffers. TCMP was added to eliminate interference from nitrification. Oxygen uptake was measured over a five-day test period using a CHALLENGE AER-200 ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Method: An industry was discharging wastewater to a municipal sewer and was suspected of causing problems with treatment at the plant. Samples of the industrial wastewater were collected and oxygen uptake for four dilutions was measured using a CHALLENGE AER-200 aerobic/anaerobic respirometer system. Biodegradation kinetic coefficients were determined using the method described by Dang, et. al. (Res. J. of Water Poll. Control Fed., p. 1711, 1989). Results of the oxygen uptake measurements and kinetic analyses are ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
A pharmaceutical company was interested in knowing whether a specific component, MCB, inhibited the biodegradation of other wastewater constituents. A series of respirometer tests was set up using identical mixtures of wastewater and return activated sludge (RAS) plus varying amounts of MCB. The OUR fingerprint of this wastewater includes a first peak of about 500 mg/L-hr within the first hour of contact that represents the oxidation of highly-biodegradable organic constituents. A second group of readily ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
A pulp mill was interested in evaluating the impact of increasing organic loading rates on the performance of their activated sludge ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Test Setup: 40 and 60 mL of wastewater were added to individual respirometer flasks each containing nutrient/mineral/buffer medium to form two different dilutions. TCMP was added to inhibit nitrification. 25 mL of seed from a laboratory scale reactor was added to each test reactor. Oxygen uptake was monitored using a CHALLENGE AER-200 respirometer for five days. A second dose of 40 and 60 mL of leachate sample was then added to each reactor and oxygen uptake was measured for another 5 ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
OUR measurements were made for two waste streams from a chemical production plant. The fingerprint for Waste 1 indicated the presence of three major groups of organic constituents. The first group of readily biodegradable organic constituents is oxidized at maximum kinetic rate through about one hour of contact. Oxidation of a second group of constituents causes the OUR to increase through about 3.5 hours of incubation. This increase in OUR is caused by growth of microorganisms during the oxidation reaction. ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Specially designed and developed for food and beverage production, chemical–free ultraviolet water treatment eliminates all types of water-borne micro-organisms, including bacteria, moulds, yeasts, spores & viruses. Critically, UV treatment does not affect the organoleptic properties of water and other liquids, providing high rates of disinfection without any changes to taste, PH, texture and odour. This key benefit has seen UV systems widely deployed in all areas of food and beverage production, ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in  Wiesbaden, GERMANY
Water is increasingly gaining importance. Not only is this the case in arid regions but also in countries like Germany. Water is a limited resource and is necessary for the preservation of human life and economic growth. In both cases quality and availability play a major role. ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in  Wiesbaden, GERMANY
In addition to providing 15 minute chemical oxygen demand (COD) results and biochemical oxygen demand (BOD) estimates, the PeCOD® Analyzer measures natural organic matter (NOM) in fresh and treated drinking water. The PeCOD® Analyzer does what no other technology has done before. It quickly and safely measures oxygen demand and the associated oxidative changes in organic matter in fresh and treated drinking water, at low concentrations and without the use of hazardous chemicals. A new ASTM International ...
ByMANTECH Inc. based in  Guelph, ONTARIO (CANADA)
Measuring and looking after our water resource is a hot topic worldwide. Governments, Councils, Water Authorities, Companies and individuals all are increasing their efforts to help protect this resource. EU Legislation around monitoring landfills, nitrate levels and the water framework directive have been introduced to help guide water quality monitoring. Aquaread’s range of water quality instruments are all suitable for spot, short and long-term deployments and are a popular choice for companies as they ...
ByAquaread Ltd, Part of the NKE Group based in  Broadstairs, UNITED KINGDOM