- Home
- kazakhstan
- Applications
Refine by
Industries served
- Agriculture
- Food and Beverage
- Oil, Gas & Refineries
- Water and Wastewater
- Monitoring and Testing
- Medical / Health Care
- Air and Climate
- Chemical & Pharmaceuticals
- Automobile & Ground Transport
- Electronics and Computers
- Construction & Construction Materials
- Energy
- Mining
- Paint
- Environmental
- University / Academia / Research
- Manufacturing, Other
- Aerospace & Air Transport
- Glassware
- Metal
- Pulp & Paper
- Waste and Recycling
- Travel & Leisure
- Soil and Groundwater
- Forestry & Wood
- Maritime/Shipbuild/Water Transport
- Retail
Xprt Product Applications In Kazakhstan
210 applications found
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Oil and natural gas are part of everyday life. Together, these fossil fuels represent 86 % of global energy demand. Products produced from oil and gas are used throughout the world as fuel (such as gasoline and diesel fuel), or as building blocks for the petrochemical and chemical industries. The process to extract, transport and refine oil and gas is complex and wrought with danger to workers and to assets. One of the most dangerous is the risk of fire or explosion due to the presence of flammable gases and ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
The manufacture and use of motor vehicles is always associated with gas and fire hazards and other risks. This applies to the production facilities in which individual components are manufactured or the vehicles are assembled, as well as tunnels and parking garages in which exhaust gases can accumulate. The type of gas hazard differs in the areas of application, but the goal to be achieved remains the same everywhere - the safety of people and the infrastructure. With its wide range of gas monitoring products, ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Gas detection requirements for power generation can vary widely based on the fuel source, which includes coal, oil, natural gas and nuclear. Regardless of the type of power facility, gas, fire and other hazards pose significant risk to employee safety and also can disrupt the supply of energy to commercial and residential customers. At Teledyne Gas and Flame Detection, our wide range of gas detection products meets the needs of all forms of power generation. Our century of experience, combined with advanced system ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
Monitoring of fugitive emissions from industrial facilities. Most of the OPSIS gas analysis systems are based on monitoring methods with open measurement paths. This provides a perfect tool for monitoring the air quality and detecting any gas leaks from industrial facilities so that staff and nearby residents can be alerted and measures can be taken ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Port environments can be particularly exposed to air pollution, both in gaseous form and as particles. The ships are an obvious source, but both activities related to the unloading and loading of goods and land traffic to and from the ports can also contribute. Monitoring the concentration of air pollutants can be done both in order to monitor the environment in general and to map the sources. In the case of emissions from ships, it may be of particular interest to monitor sulfur dioxide (SO2) levels near the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
How clean is the ambient air in our cities? A common strategy for monitoring the air quality in a city is to measure at ground level where people actually live and are at risk of exposure to air pollution. Often, there is also a requirement that the measurements are made in a place where you can expect the air pollution to be relatively high, which often means along one of the city's busier streets. Limit values for air quality often apply precisely to these locations. OPSIS offers several monitoring systems for ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The almost closed environment means that high levels of air pollution often occur inside the tunnels. The limit values for the pollutants are often higher in tunnels than in open ambient air because the exposure time is normally limited, but it may still be necessary to monitor that the limit values are not exceeded. Traffic tunnels often have to be provided with ventilation to keep the levels of air pollutants below the applicable limit values. To save energy, however, it is common not to operate the fans more ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Air pollution at regional and national scales. It is important to monitor air pollution where many people stay, i.e. in cities and especially at street level. In order to better understand where the pollution comes from, a so-called background monitoring may also be needed. Then the monitoring station is placed in the countryside, at a great distance from obvious sources of the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
When employees are sent into a potentially dangerous confined space, you want to ensure their safety and your company’s compliance. Defined by the HSE as a place which is substantially enclosed (though not always entirely), and where serious injury can occur from hazardous substances or conditions within the space or nearby (e.g. lack of oxygen), confined spaces can be life-threatening if you don’t know what you’re dealing ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
In order to adequately face the challenges that a firefighter faces on a daily basis one should understand the importance of detecting the harmful gases present, in order to be alerted to danger and to ensure the correct precautions are taken to prevent exposure. Understanding the different types of gases and the dangers that they can pose to people is the first step in choosing the correct form of gas detection. Even the most common gases, such as oxygen and nitrogen, can have devastating effects if present at ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
Industrial gases include all companies which manufacture atmospheric Gases, specific gases, semi-conductor gases and supply them to end users in different ways: on-site, cylinders, tanks to be used in lot of industrial manufacturing ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
Whether pre-cooking food, treating wastes and byproducts or ensuring food is preserved properly for shipment and safe keeping until it arrives at the grocery store, food and beverage processors use and also produce dangerous gases. As a result, gas detection is an important part of the everyday safety requirements for these processing facilities. Teledyne Gas and Flame Detection’s gas detection products can meet the wide-ranging needs of food and beverage processing plants. Our products are also able to ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few ...
ByOPSIS AB based in  Furulund, SWEDEN