- Home
- kazakhstan
- Applications
Refine by
Industries served
- Agriculture
- Food and Beverage
- Oil, Gas & Refineries
- Water and Wastewater
- Monitoring and Testing
- Medical / Health Care
- Air and Climate
- Chemical & Pharmaceuticals
- Automobile & Ground Transport
- Electronics and Computers
- Energy
- Construction & Construction Materials
- Mining
- Paint
- Environmental
- University / Academia / Research
- Manufacturing, Other
- Aerospace & Air Transport
- Glassware
- Metal
- Pulp & Paper
- Waste and Recycling
- Travel & Leisure
- Soil and Groundwater
- Forestry & Wood
- Retail
- Maritime/Shipbuild/Water Transport
Xprt Product Applications In Kazakhstan
210 applications found
Premium
Port environments can be particularly exposed to air pollution, both in gaseous form and as particles. The ships are an obvious source, but both activities related to the unloading and loading of goods and land traffic to and from the ports can also contribute. Monitoring the concentration of air pollutants can be done both in order to monitor the environment in general and to map the sources. In the case of emissions from ships, it may be of particular interest to monitor sulfur dioxide (SO2) levels near the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. The use of extractive monitoring systems in such environments requires a lot of maintenance and can still cause major operational disruptions. However, the contactless technology offered by OPSIS solves the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Demanding monitoring environment at cement industries. Process control and emissions monitoring at a cement plant can be a challenge due to high dust levels and corrosive gases. OPSIS offers gas analysis systems that can handle these environments and that have high accuracy, short response times, and long maintenance ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
'Chemical industry' can comprise many types of industries, for example refineries, paper mills, fertilizer production, and sulfuric acid plants. Each individual industry may have its own special needs and special environments, but there are also many common factors. Regardless, process control and emissions monitoring at chemical plants can be challenging due to for example toxic, aggressive and/or explosive gases, and high temperatures. The use of extractive systems in such environments requires a lot of ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring of fugitive emissions from industrial facilities. Most of the OPSIS gas analysis systems are based on monitoring methods with open measurement paths. This provides a perfect tool for monitoring the air quality and detecting any gas leaks from industrial facilities so that staff and nearby residents can be alerted and measures can be taken ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Process monitoring and monitoring of emissions from aluminium smelters can be a challenge due to high concentrations of for example hydrogen fluoride (HF) and dust. The use of sampling systems in such environments requires a lot of maintenance and is therefore costly. Such systems can also be unreliable. OPSIS offers better ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A challenging environment for monitoring instruments. Process control and emissions monitoring at a fertilizer plant can be difficult due to aggressive process gases in high concentrations, sometimes at high temperatures and pressures. Use of extractive monitoring systems in such an environment requires a lot of maintenance and the instruments are prone to malfunction. However, unlike extractive systems, OPSIS non-contact monitoring technology has no problem handling these ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
When employees are sent into a potentially dangerous confined space, you want to ensure their safety and your company’s compliance. Defined by the HSE as a place which is substantially enclosed (though not always entirely), and where serious injury can occur from hazardous substances or conditions within the space or nearby (e.g. lack of oxygen), confined spaces can be life-threatening if you don’t know what you’re dealing ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
In order to adequately face the challenges that a firefighter faces on a daily basis one should understand the importance of detecting the harmful gases present, in order to be alerted to danger and to ensure the correct precautions are taken to prevent exposure. Understanding the different types of gases and the dangers that they can pose to people is the first step in choosing the correct form of gas detection. Even the most common gases, such as oxygen and nitrogen, can have devastating effects if present at ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
Industrial gases include all companies which manufacture atmospheric Gases, specific gases, semi-conductor gases and supply them to end users in different ways: on-site, cylinders, tanks to be used in lot of industrial manufacturing ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
Whether pre-cooking food, treating wastes and byproducts or ensuring food is preserved properly for shipment and safe keeping until it arrives at the grocery store, food and beverage processors use and also produce dangerous gases. As a result, gas detection is an important part of the everyday safety requirements for these processing facilities. Teledyne Gas and Flame Detection’s gas detection products can meet the wide-ranging needs of food and beverage processing plants. Our products are also able to ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE
Premium
Data Management enables businesses to utilize real internal data to shape business and process decisions without estimation and guesswork. Using technology to harness the power of everyday field data improves business performance and lets organizations focus on their core business, leaving the management of Gas detectors to Teledyne Gas & Flame ...
ByTeledyne Gas and Flame Detection based in  Arras Cedex, FRANCE