latin america
Applications

Xprt Product Applications In Latin America

2,459 applications found

In Latin America Available In Latin America Near Latin America

Premium

Continuous emissions monitoring for glass manufacturing industries

The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...

ByOPSIS AB based in Furulund, SWEDEN

Premium

Continuous emissions monitoring solutions for mineral wool production

Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...

ByOPSIS AB based in Furulund, SWEDEN

Premium

Continuous emissions monitoring solutions for palm oil plants

Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...

ByOPSIS AB based in Furulund, SWEDEN

Premium

Continuous emissions monitoring solutions for steel plants

The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...

ByOPSIS AB based in Furulund, SWEDEN

Premium

Quality control of milk products

In order to maintain high quality of milk products, it is necessary to monitor process quality as rapidly as possible, so that a relevant technological process could be promptly corrected. The most important quality factors of milk products are fat, protein, moisture (total solids), SNF, sugar, salt, lactose and titrated acidity. Commonly, it takes a few hours to make such type of analyses by traditional methods. The use of an InfraLUM® NIR analyzers reduces the analysis time to a couple of ...

ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)

Premium

Milling process control

NIR-analyzer InfraLUM FT-12 is used for quality control of flour and by-products at all milling stages. With InfraLUM FT-12 analyser is possible to create, localize, and update calibration models. Installation and calibration using Customer’s samples are made at the Customer’s lab. ...

ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)

Premium

Continuous emissions monitoring solutions for Pulp Mills - TRS and H2S Monitoring

Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...

ByOPSIS AB based in Furulund, SWEDEN

Premium

Continuous emissions monitoring solutions for waste to energy plants

Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...

ByOPSIS AB based in Furulund, SWEDEN

Premium

Water and Wastewater Applications for Scraper Strainers Line

Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...

ByAcme Engineering Prod. Ltd. based in Mount-Royal, QUEBEC (CANADA)

Premium

Continuous emissions monitoring solutions for sulfuric acid production plants

A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...

ByOPSIS AB based in Furulund, SWEDEN

Premium

Air pollution, emission and process monitoring systems for power generation

ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...