- Home
- latin america
- Applications
Refine by
Industries served
- Water and Wastewater
- Manufacturing, Other
- Monitoring and Testing
- Oil, Gas & Refineries
- Energy
- Food and Beverage
- Environmental
- Agriculture
- Mining
- Air and Climate
- Medical / Health Care
- Construction & Construction Materials
- Pulp & Paper
- Metal
- Chemical & Pharmaceuticals
- Soil and Groundwater
- Automobile & Ground Transport
- Electronics and Computers
- Glassware
- Waste and Recycling
- University / Academia / Research
- Aerospace & Air Transport
- Health and Safety
- Defense
- Plastics & Resins
- Paint
- Commercial
- Textile
- Packaging
- Printing
- Communications / Telecom / Datacom
- Travel & Leisure
- Government
- Forestry & Wood
- Maritime/Shipbuild/Water Transport
- Dry Cleaning
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Retail
- Logistics
Xprt Product Applications In Latin America
2,459 applications found
This method uses a suspension of ground plant material to directly measure the potassium concentration. It eliminates the usual steps of ashing and subsequent dissolution of the resulting ash. The method was compared to alternative methods such as chemical analysis and spectrophotometric methods. Collaborative studies using a range of samples gave a mean of 1.74% potassium by this extraction technique as compared to 1.75% by alternative methods. The standard deviation of an analysis in the two different sample ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
These methods are adapted from methods for the determination of sodium and potassium in fatty-acid methyl ester samples. The sample is diluted with an organic solvent (xylene, cyclohexane or petroleum ether) plus a stabiliser. The calibration standards which have a similar matrix to the prepared sample solutions, are prepared from sodium and potassium organometallic salts which are dissolved in a solution of xylene with a stabiliser. These European Standards specify a method for the determination of potassium of ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Wine is of particular interest nutritionally because it is typically low in sodium and relatively high in potassium. Sodium is the predominant cation in breakfast cereals, at levels reaching 8mg/g. Potassium and calcium also vary, particularly in wheat-based products and those enriched with milk products or calcium ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
This method allows the analyte to be pre-concentrated in the final solution, decreases the volume of strong acid used in the dissolution stage and does not use organic ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Environmental Monitoring & Fugitive ...
ByAMETEK MOCON based in  Brooklyn Park, MINNESOTA (USA)
Equip yourself with various operating voltages and advanced control. From silicon wafer processing to steel-billet production, thermal processing, including general heat treatment, is used in everything. And to transform your materials into reliable, high-quality, finished products, you need precise ...
ByAdvanced Energy Industries, Inc. based in  Denver, COLORADO (USA)
Membrane Specialists employ its proprietary Fyne process which uses nanofiltration to retain dissolved organic materials (mostly humic and fulvic acids) commonly found in surface waters used for drinking in remote communities in Canada and Alaska. If the organic components are not removed prior to chlorination, they can yield undesired disinfection by-products such as trihalomethanes and haloacetic acids. The membrane system also reduces levels of iron and other metals, along with waterborne pathogens, microbes ...
ByMembrane Specialists LLC based in  Hamilton, OHIO (USA)
Applications of Acoustics and Electroacoustics for characterizing mineral dispersions are described in the papers listed below. Titration option of the DTI instruments is suitable for determining optimum dose of surfactant for stabilizing clay and mineral ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Non-destructive testing (NDT) is an inspection and analysis technique used by the oil and gas industry, among others, to evaluate the properties of pipelines without destroying the serviceability of the original system. Surface corrosion, mechanical damages, and cracks are the most common discontinuities detected by visual ...
ByCreaform - AMETEK, Inc based in  Lévis, QUEBEC (CANADA)
Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the ...
ByFluence Corporation based in  PLYMOUTH, NEW YORK (USA)
MOP (muriate of potash) is used in water softening systems. Ion-exchange softeners allow for the improvement of the quality of potable and processed water. Water flows through a porous material, i.e. ion-exchange resin, where Ca and Mg ions are removed from water and stay in the ion-exchanger while Na or K ion is put in their place on its surface. When all the available sodium ions have been replaced with calcium or magnesium ions during operation, the resin must be ...
ByUralkali Trading SIA based in  Riga, LATVIA
The expert for air filtration in smokehouses. Specific requirements for air purification in smokehouses. The exhaust of strong odour and fumes from food production lines requires the cleaning of waste air emissions. In comparison to non-food productions, the food processing industry is often faced with particular problems that arise from either the type of emission/emissions or are due to the manufacturer’s ...
ByKMA Umwelttechnik GmbH based in  Königswinter, GERMANY
EyeCSite 2.0 is the industry-leading quantification software, offering a wide range of functionalities that detects, alerts and quantifies emissions in a very simplified and user-friendly interface, without the need for a close contact analyzer. ...
ByOPGAL based in  Karmiel, ISRAEL
SmartCEMS Statistical Hybrid PEMS is used as a compliance monitoring solution for boilers, heaters, reformers, distillation, and other a variety of sources at chemical production facilities. CMC’s SmartCEMS with Data eLements provide a complete compliance monitoring system for 40 CFR Part 60 compliance. CMC Solutions will guarantee certification of its PEMS products for use in compliance monitoring. CMC’s virtual process analyzer (VPA) product is used for optimization, backup analysis, and pollution ...
ByCMC Solutions, LLC based in  Farmington Hills, MICHIGAN (USA)
The emission challenge is significant to ETG Risorse e Tecnologia. For years it has been engaged in providing instrumentation and support to authorities and companies operating in the environmental sector. Climate change is a scientifically established reality, as is its anthropogenic origin; emissions of pollutants into the atmosphere are one of its leading causes. Their monitoring - in addition to being mandatory - allows their level to be kept under control. ETG fully supports the Green Deal and the European ...
ByETG Risorse e Tecnologia S.r.l. based in  Chivasso (TO), ITALY
Future-proof your production environment with products/services from a single source. The patent for the production of sand-lime brick has existed since 1880. Eirich has contributed to the sand-lime brick success story since its earliest industrial beginnings. ...
ByMaschinenfabrik Gustav Eirich GmbH & Co KG based in  Hardheim, GERMANY
Eirich specializes in systems for preparing bentonite-bonded molding sand, and for many years the company has maintained a close working relationship with foundries, moldmakers and research organizations. A steadily increasing number of Eirich sand preparation systems for gray iron, steel and non-iron castings are supplying the molding lines of all the major manufacturers worldwide, delivering leading-edge quality, throughput and efficiency. Made-to-measure molding sand ...
ByMaschinenfabrik Gustav Eirich GmbH & Co KG based in  Hardheim, GERMANY
Tailor-made solutions – Effective and trendsetting: Eirich supplies technologies for the economical preparation of raw materials, auxiliary materials and residues for recycling and disposal. The product line includes not only machinery and systems but also a full range of services covering everything from consulting to start-up. ...
ByMaschinenfabrik Gustav Eirich GmbH & Co KG based in  Hardheim, GERMANY
Eirich offers tried and tested solutions at the highest technical level for the following ...
ByMaschinenfabrik Gustav Eirich GmbH & Co KG based in  Hardheim, GERMANY