Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Medical / Health Care
- Agriculture
- Air and Climate
- Oil, Gas & Refineries
- Food and Beverage
- Chemical & Pharmaceuticals
- Environmental
- Waste and Recycling
- Energy
- Mining
- Metal
- Soil and Groundwater
- Glassware
- Health and Safety
- University / Academia / Research
- Construction & Construction Materials
- Paint
- Pulp & Paper
- Electronics and Computers
- Plastics & Resins
- Automobile & Ground Transport
- Aerospace & Air Transport
- Communications / Telecom / Datacom
- Government
- Banking & Finance / Insurance / Legal
- Furniture
- Forestry & Wood
- Commercial
- Maritime/Shipbuild/Water Transport
Xprt Product Applications In Lithuania
591 applications found
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
In order to maintain high quality of milk products, it is necessary to monitor process quality as rapidly as possible, so that a relevant technological process could be promptly corrected. The most important quality factors of milk products are fat, protein, moisture (total solids), SNF, sugar, salt, lactose and titrated acidity. Commonly, it takes a few hours to make such type of analyses by traditional methods. The use of an InfraLUM® NIR analyzers reduces the analysis time to a couple of ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
NIR-analyzer InfraLUM FT-12 is used for quality control of flour and by-products at all milling stages. With InfraLUM FT-12 analyser is possible to create, localize, and update calibration models. Installation and calibration using Customer’s samples are made at the Customer’s lab. ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
We are GHG Certified: US EPA CFR 40 Part 98 put industry on notice that secondary emissions from small boilers must be accounted for accurately. Sierra responded with GHG certified mass flow meters to support our customers with this requirement. Immersible thermal mass flow meters are an economical and acceptable way to measure GHG for EPA compliance. Our BoilerTrak 620S was designed specifically for this ...
BySierra Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
Premium
Thermal mass flowmeters are ideal for Carbon Dioxide metering and mass flow control. Sierra specializes in accurate mass flow measurement and/or control of CO2 gas. Applications for our gas flow meter types range from general industrial process control across numerous industries to Green House Gas (GHG) emissions flow monitoring requirements and general ...
BySierra Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
Premium
Introduction The method is used for the determination of the mass fraction of total amino acids: arginine, lysine, tyrosine, phenylalanine, histidine, leucine and iso-leucine (as a sum), methionine, valine, proline, alanine, glycine, cystine, tryptophan, aspartic, and glutamic acids in feedstuffs, compound feeds, fodders, premixes, and all types of feed raw materials by capillary ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION Blood is one of the most complex substances for determination of the Hg content. At the same time, blood is the most important diagnostic medium used for monitoring the effect of Hg vapor on the human organism. In almost all the countries, personnel of mercury-involving production facilities are regularly examined for the Hg content in blood, which should not exceed 20–50 µg/l, whereas in the case of a person unexposed to mercury vapor the blood normally contains 1–3 µg/l of ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Determination of mercury in oil and petroleum hydrocarbon is currently a vital probl em due to the fact that the regulations for the mercury content in emission s from thermal power plants are becoming ever more stringent, and mercury poisons catalysts used in oil re ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: Capillary electrophoresis analyses of particularly complex samples can be highly problematic due to the presence of many compounds, deteriorating the separation inside the capillary. Fermentation liquid is one of such samples, full of proteins, cell debris, and lipids. At the same time accurate analysis of fermentation liquid for the presence of inorganic anions, or cations, or organic acids can be of utmost importance to ensure the correct way of the whole process. For example, the elevated values ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
The application possibilities of the KAHL pelleting press are numerous: For example, for wood wastes, straw, agricultural biomass, waste paper, household and industrial waste, waste tires, sewage sludge, waste plastics and many ...
ByAmandus Kahl GmbH & Co. KG based in  Reinbek, GERMANY
Durable, reliable analysis for black liquor. Black liquor is a difficult substance to work with. It’s caustic, it’s toxic, and it emits poisonous gases such as hydrogen sulfide. But the efficient use of black liquor is critical to the profitable operation of any pulp and paper mill. In order to use black liquor efficiently, you need to test it for solids. Make sure your solids analyzer is up to the ...
ByAMETEK Brookfield based in  Middleboro, MASSACHUSETTS (USA)
Working on a hazardous materials team means being prepared for the unexpected, from toxic chemicals to unidentified powders to overturned trucks. Should “the unexpected” ever include mercury and mercury vapor contamination incident response, trust Jerome mercury vapor analyzers to keep your team and your community ...
ByAMETEK Brookfield based in  Middleboro, MASSACHUSETTS (USA)